I really like that it is 3" wide giving you a secure clamping, it does not slip as you make your cuts.

I use this when I have to rip down boards or sheets, it works as advertised. I'd love for it to be longer though

Me gustó el producto, apesar de que contiene partes pláticas, se siente de buenn material al igual que la guía ee aluminio, muy ligero, no tuve oportunidad de usarlo pero a mi percepción ha e ser de mucha ayuda. Lastima que el producto no venía empaquetado únicamente con la etiqueta e envió, así que llego con muchos rozones y torcido de la punta en uno de los rieles como en la foto, también pude notar que este producto lo han estado ofreciendo en esta plataforma y lo regresan por lo mismo. Cuando quice comprarlo hace un par de semanas atrás ya no lo tenía el proveedor en existencia y de repente estaba a la venta este mismo producto.

En una excelente herramienta de trabajo, para mi se ha vuelto indispensable en mi día a día, para hacer cortes con mi sierra circular de mano.Lo recomiendo ampliamente, además de que hay muchos accesorios para hacerla aún más útil

Es útil aunque no tengas los aditamentos adicionales para la caladora o la sierra circular manual, porque te puede guiar las herramientas, considerando el espacio entre la hoja de corte y el armazón de la base de la herramienta.

Searched internet for best straight edge with clamp. I came across Bora product line and read numerous reviews which I agree with, were mostly positive. The NGX 50 Inch w/clamp is made of sturdy aluminum material and is very solid. It is easy to use based on its design of having a fixed mount grip on one end and adjustable sliding clamp on the opposite end. Its design of a simple lock and release mechanism at the adjustable end makes it easier to quickly slide and lock the clamp to the desired position. Once locked it does securely hold whatever object I was working on. I choose this model over the previous model for that reason and I am glad I did. Ease of use, quality build construction, including the hard plastic ends used for clamping, truly makes this item worth it's price. Very happy to have come across this product!

Demasiado delgada, se curva un poco y se mueve al momento de utilizar la cortadora

Funciona perfectamente con la guía para sierra caladora de BORA (542009) realizando cortes rectos cada vez

muy fácil de usar

Tenía esperanza de que esta guía para sierra circular me funcionará porque quería una que pudiera prensar rápidamente, sin embargo al revisar su precisión encontré que no está del todo derecha, quizás si no requieres mucha precisión en el corte te sirva, solicité devolución, por cierto la palanca de apriete a veces se atora y como que no es muy práctica a la hora de estar aflojándola y apretando constantemente.

No se pudo cargar el contenido.

I got this with the saw guide, to make an "affordable track saw".Works pretty darn well for that purpose, once you get the edge guidealigned with your saw.BIG TIP:The clamp always seemed to be "sticking". Sometimes it would slide easily, butoften it would jam up and stop sliding at all. It took forever to figure out the trick.Now it slides easily all the time. The trick is this:* The orange part of the clamp has two little tabs sticking out at the back end.* I had no idea what they were for, and none of the instructions mentioned them.* You put the heel of you palm against the back of the gray handle (in the "open"position), and then pull back on those tabs with your fingers, as though pullingon a hypodermic needle.* Voila! The internals of the clamping mechanism (whatever they are) COMPLETELYdisengage, and the clamp slides freely in its track.Important Notes:1) In the pictures, the "edge guide" looks like thin tape that could go anywhere.It's not. It's a nice, thick piece of plastic, with adhesive on one edge so it is ready toapply, and there is cut-away on the bottom of the clamp to attach it to, so it works well.2) You NEED the edge guide. If you use the clamp for cutting sheet goods, you darnwell want that edge guide in place. It is the ONLY good way to align the clamp forcutting. (There are blade-markers on the saw guide, but they're not really useful forlining up the cut when the saw is on the guide. (If you take the saw off, they may work.I didn't.)3) To attach the edge guide, it's best to remove the clamping mechanism. (Easily doneby taking out two screws. The instructions don't say that (they could use improving),but it's pretty easy to figure out there is no way to attach the edge guide the fulllength of the clamp, until you do.4. The tape on the edge guide doesn't QUITE go to the end. It's maybe 1/4" short, butthere is an inch of extra tape, so do yourself a favor and cut off the end of the guidewhere there is no adhesive, before you start applying it to the clamp. That will removethe slight tendency of the edge to lift up--something I may have to trim off, eventually.5. Don't bother with the T-Square attachment! Total waste of money, if you're using theclamp as a track-saw. (For details, see my review of that attachment. It works fine whenit makes a "T", but it has to be in an "L" configuration to work with your saw. And in thatconfiguration, it fails miserably.)6. Now that you know you CAN'T depend on the T-Square for alignment, and you MUST havethe edge guide in place, do yourself a favor and mark BOTH sides of the panel you're cutting.Then put the clamp in place, and cut away. You'll save yourself the half-panel I ruinedbefore I figured out those steps.7. But there is still ONE MORE PROBLEM to solve, if your saw is like mine.The edge guard projects 1/2" beyond the edge of the clamp.The instructions for mounting the saw to the saw plate don't SAY to put the bladeas close as possible to the edge of the plate, but they should.What they DO say is to make sure the blade guard is free to move.That's a darn good idea. BUT...On my Ryobi saw, "reasonably close" puts the blade 3/4" from the plate.The blade guard is pretty thick where it is close to the plate, so I can get itthe saw MAYBE 1/8" closer, while still being able to move the guard.I KNOW I can move it 1/16" of inch closer. And I MAY be able to move it 1/8".But I NEED it to be a full 1/4" closer, for the edge-guide to be of any use.In "short" (pun intended), the edge-guide is 1/4" too short for use with myRyobi circular saw. Will it work with other saws? Don't know. But I wouldcheck the width of yours. If your blade guard is more than 1/8" from theedge of the blade, it won't work.There is a WORKAROUND, though. So check your saw before installingthe plastic strip that comes with the clamp. If it won't be wide enough,double-sided carpet tape and a strip of linoleum are the perfect size.Here's the procedure:a) Get a linoleum remnant from your nearest big box store, along withdouble-sided carpet tape.b) Cut a 2" strip of linoleum the length of your clamp.c) Put double-sided carpet tape in the groove under the clamp.d) Turn the clamp right-side-up and use your razor-knife to trim the excess tape.e) Turn the clamp over again, peel the backing from the tape, and put down thestrip of linoleum, shiny-side pressing into the tape.f) Find a nice long piece of wood you can cut the end off, and do it.Voila! You now have a perfectly-trimmed edge guide!

As described