Carro de la compra

No hay artículos en el carro

No hay artículos en el carro

Boncoo - Lámpara de mesa con control táctil, 3 vías regulable, luz nocturna simple con visualización blanca, base de metal plateado, lámpara de mesita de noche pequeña para recámara, oficina,

Envío gratis en pedidos superiores a Mex $600.00

Mex $672.27

Mex $ 342 .00 Mex $342.00

En stock

1.Color:Blanco


Acerca de este artículo

  • Control táctil y regulable de 3 vías: la pequeña lámpara responde a tu llave instantáneamente sin esperar. Simplemente toca suavemente cualquier parte de la base de la lámpara y simultáneamente tendrás una luz suave en 3 brillos (bajo, medio, alto) para relajar la lectura o el trabajo. Adiós a acercarse para cambiar en la oscuridad o cambiar el ruido despertar a tu amante, la lámpara táctil ofrece una experiencia de iluminación relajante y silenciosa.
  • Diseño moderno y cuidado de los ojos: construida con una elegante base plateada y una visualización blanca minimalista, la pequeña lámpara es un gran adorno que se puede integrar bien con tu estilo de decoración existente. La visualización de tela de alta calidad suaviza la luminancia, por lo que es lo suficientemente brillante pero no dura para cegar tus ojos.
  • Construcción de metal sólido: la base de metal de alta calidad garantiza que la lámpara de mesa lateral se mantenga firmemente en el computadora y mantenga una elegancia duradera. Con alfombrilla antideslizante y base de metal pesado, esta lámpara de computadora es lo suficientemente segura como para colocar en la mesa y incluso los niños son fáciles de alcanzar.
  • Lámpara de mesa pequeña para varios espacios: tamaño compacto (altura: 16 pulgadas, diámetro de la base 4.5 pulgadas), la lámpara de control táctil es adecuada para espacios limitados, se utiliza así como una lámpara de mesa para mesita de noche, lámpara de noche, lámpara de computadora pequeña, etc. Nota: comprueba la tercera imagen para saber más detalles sobre las dimensiones antes de comprar.
  • foco LED incluida: la foco A19 de 9 W y 3000 K está empaquetada con esta lámpara de mesa regulable para tu comodidad. No más necesidad de sufrir una comparación interminable y dudar en decidir qué foco comprar. Equipa a foco incandescente de 85 W, sin deslumbramiento y no parpadea, ahorrando hasta un 90% de factura eléctrica mientras emite suficiente brillo para iluminar una habitación.



Descripción del producto

Lámpara de control táctil
Lámpara regulable
Tamaño ideal

Diseño minimalista adecuado para lugares pequeños

Medido como 40 x 27 x 10 cm, esta moderna lámpara de mesita de noche emitirá la luminancia adecuada que necesitas. Solo ocupa muy poco espacio, pero le da una habitación de brillo a cambio.

Esta pequeña lámpara es buena como lámpara de mesita de noche, lámpara de guardería y lámpara ambiental. Es un material de tela tc que permite que la luz se ilumine a través de la sombra por encima y debajo de ella. Jugando con tus hijos, escuchando música ligera, haciendo yoga, no importa lo que hagas, la lámpara es tu mejor compañero con su atractivo brillo y ambiente relajante creado.

Nota: Ten en cuenta el tamaño de la lámpara antes de comprar

Especificaciones:

  • Potencia: 60 W máx
  • Voltaje: 110-130 V
  • Soporte de lámpara: Bombilla E26 (A19 de 6 W, 2700 K incluida)
  • Tipo de interruptor: Control táctil
  • Color: Pantalla blanca y base plateada
  • Material: Pantalla de tela de base de metal y TC
Lámpara táctil

Control táctil

Equipado con un sensor táctil avanzado, la lámpara se activará con un ligero toque en la base de la lámpara plateada. Esta lámpara táctil de noche es adecuada para aquellos que están cansados de tocar para un interruptor en la oscuridad.

Notas de uso: Mantén la lámpara alejada de algunos electrodomésticos con fuertes interferencias ya que pueden influir en la función táctil.

lámpara versátil

Barbara L. Grimes
Comentado en Canadá el 4 de marzo de 2025
this a great little bedside lamp. the design maximizes space on your bedside table because the base is small. comes with an LED bulb also.
Esther De Castro
Comentado en los Estados Unidos el 25 de marzo de 2025
super cute and good materials, very practic. Touch control and brightness settings are perfect. worth the price!
Chinatown Fight Club NYC
Comentado en los Estados Unidos el 25 de marzo de 2025
I was looking for a soldering kit that had everything I needed to do any small soldering repair, and this LDK Soldering Iron Kit was perfect. For the price, you can't go wrong, and you don't need to buy anything else separately. Of course, it's not professional level or anything, but for little odd soldering jobs, it's everything you need, all nice and neat in a cool black and blue zippered organizer case. A soldering kit was the one thing missing from my tool chest, as I do most of the little repairs in both my home and gym/club. I am so glad to have this kit ready when I need it!
Richard Smith
Comentado en los Estados Unidos el 23 de marzo de 2025
I needed a soldering kit to supplement my main kit so I could have something on the go. This turned out to be a great solution providing not only the soldering iron but most everything I would need when on the go. I was surprised at how quickly the soldering pen heated up. It comes with a vacuum tool to remove solder while removing components, solder, sponge, stand, paste, tweezers, extra tips and a nice case to keep it all together. This is a great spare kit for someone who solders a lot and wants something to take on the go or would function as a primary kit for someone who only solders occasionally. Overall I am impressed with the quality and value of this kit. It works well.
pog
Comentado en los Estados Unidos el 22 de marzo de 2025
Pretty much everything you need is included, laid out very nicely in a compact case. For the price, it's an absolute bargain.I am not overly fond of the stand, but just bend the resting arm slightly, just enough to keep the iron's tip up off the surface, and you will be able to fit the stand back in the case without issue.But the star of the show is the soldering iron itself. The 100W rating is a maximum value for hardware safety/capability. I hooked it into my killawatt meter and, after an onrush of 90W, it used 45W to heat up from ambient to the maximum 500C the unit let me dial in. I didn't time this (sorry) but it was less than 30 seconds. Then it consumed 30W to maintain this heat. I feel this is great because it functions well and isn't typically running itself ragged to do so. My iron turned on with itself set for 350C as the initial setting.I don't believe we are getting the measured number as the temperature at the tip, but I couldn't get a reading using a non-contact heat gun since the tip is so small. However, it wasn't really able to scorch paper until the reading was over 300C.I think for basic soldering jobs you might have in your workshop or at home, this unit will be perfect. This isn't an industrial quality iron, it's a cheap set for low budget casual usage. And so far, it does this job extremely well.
Frugal Shopper
Comentado en los Estados Unidos el 17 de marzo de 2025
LDK Soldering Iron Kit, 100W Digital Soldering Iron Cautin for Electronics, Soldering Iron Pen Soldering Gun Jewelry Welding Kit with 5pcs Tips, Stand, Solder, Solder Paste, Solder Sucker, TweezersI use my soldering iron once in a while to repair small items and when making jewelry. My iron was purchased and has been used since the mid-seventies when I was attending electronics school. RETS was the name of the school, I just remembered, wow. Anyway, the iron is old, chunky and antiquated. Time for an upgrade, indeed.This is a basic, well made kit which is perfect for me. The iron is temperature controlled. Adjustable temperature controlled with a digital LED readout! Welcome to the 21st century. The iron fits comfortably well in my hand and is designed for less accidental burns. Goodness knows, I’ve received my share through the years.The kit is basic and has everything you would need. Iron, flux, solder, stand and more are included. Oh, and let’s not forget, 5 interchangeable tips, not including the attached tip. Yes.The woven case is solidly made with a good strong zipper. I prefer this style rather than a hard plastic case that can crack and come apart. The inside elastics are strong and are sewn in tightly. The elasticity of the small straps have good expansion and return. They are not cheaply made and should maintain their elasticity for awhile without breaking down. I won’t have a problem switching out the solder and flux with my own preferences.This is a nice basic set for the occasional hobbyist or household repairs to lamps and such. It’s nice having everything in one kit. Pluck it right up and you’re ready to go without looking through your tool box for parts/supplies you need. It keeps your workbench organized. Just right for my needs.The kit weighs in fair with its price point. Without having used this yet, my only concern is why in the heck would someone put an ugly description sticker right smack on the front of the beautiful case? Why wasn’t the kit enclosed in protective plastic post delivery?My other operative concern is the cooling rack. Though an upgrade from my good for nothing two inch metal stand, it would be better/safer with a ‘spring holder’. At this price point, though fair, it wouldn’t have busted the bank for the supplier/designer to have included a spring rest.Until I actually use the iron and it doesn’t live up to its promise, this kit gets 4 Stars.⭐️⭐️⭐️⭐️
Cathy Sherman
Comentado en Canadá el 27 de febrero de 2025
Great bedside touch lamps, sturdy too
frankp93
Comentado en los Estados Unidos el 23 de abril de 2025
I've gotten so use to the rapid heating of my soldering station that I sometime forget that even the newer generation of temperature-controlled pencils can still take a little while to reach the 600-750 range I like to work in for light electronics: non-board pots, switches, wires.I prefer chisel tips to conical, it's easier to apply a larger surface area to transfer heat. It's easy to swap out tips with this kit and a chisel tip is included.It'll melt leaded solder fairly quickly, perhaps after a minute or so. But to heat pot lugs at around 650 took a few minutes. Oxidation may have played a part, I applied flux after the first try and that heated more quickly.The usual accessories, solder sucker, holder, etc are pretty much generic.Bottom Line: A good portable kit when I can't lug my station around.
J. Germello
Comentado en los Estados Unidos el 18 de diciembre de 2024
This lamp is a beautiful piece to add to any room. Set up is, and with the touch sensor makes it so much better. I don't have to get up to turn the light on and off. It's a decent size and not too heavy nor light. I highly recommend this.
Love them
Comentado en Canadá el 18 de septiembre de 2024
I love how they turn on and off by touching any part of the base. Great lamp for a small space.
Francisco H.
Comentado en México el 29 de junio de 2023
Muy buena relación costo beneficio.
Productos recomendados