No hay artículos en el carro
No hay artículos en el carroDescripción del producto
Compatible con el vehículo:
Compatible con Infiniti
2008-2012 EX35 V6 3.5L2013-2013 EX37 V6 3.7L2009-2012 FX35 V6 3.5L2013-2013 FX37 V6 3.7L2008-2008. G35 VVVV6 3.5L, RWD2007-2007 G35 V6 3.5L, solo sedán y RWD2008-2013 G37 V6 3.7L, RWD2009-2010 M35 V6 3.5L2011-2013 M37 V6 3.7L, RWD2015-2015 Q40 V6 3.7L, AWD
2014-2015 Q50 V6 3.5L, con dirección hidráulica2014-2015 Q50 V6 3.7L, con Steerin2014-2015 Q60 V6 3.7L, Coupe2014-2019 Q70 V5.7 L, RWD2015-2019 Q70L V6 3.7L, RWD2014-2017 QX50 V6 3.7L2014-2017 QX70 V6 3.7L
Compatible con Nissan
2009-2020 370Z V6 3.7L
Número de pieza OE
21-394, 21394, 491101CB0B, 49110-1CB0B, 49110-1EA0A, 49110-JK200, 49110-JK20A, 491101EA0A, 491101CB0B, 491101EA0A, 491111 0JK200, 49110JK20A, 49110JK20A
Detalles del producto:
Condición: Nuevo (no remanufacturado). El paquete incluye: 1 bomba de dirección asistida; 1 polea (sin depósito)
Nuestros productos se prueban a fondo antes del envío, lo que puede dejar una pequeña cantidad de residuos de aceite de prueba. Ten la seguridad de que esto no indica el uso previo ni compromete la calidad del producto.
A.J.
Comentado en los Estados Unidos el 3 de marzo de 2025
This power steering pump with a pulley is essential because the pulley allows the pump to be driven by the engine belt, which in turn generates the hydraulic pressure needed to assist with steering, making it significantly easier to turn the wheels, especially at low speeds; without the pulley, the pump wouldn't be able to function and provide power steering assistance. I recommend this item.
WeBuyEverythingOn
Comentado en los Estados Unidos el 27 de febrero de 2025
My daughter's QX60 has those big, meaty tires that grip like crazy on her QX60 land yacht SUV-slash-Sportscar beast and the steering was getting harder and harder to move when stationary. It wasn't groaning that much, which puzzled me, and it wasn't leaking - so it wasn't the rack and pinion. I took the chance it was the pump not making enough pressure to turn those huge tires very well, and so we just finished swapping out the old pump for this pump. It works beautifully!One thing I will point out is that I like not needing to remove the old pulley and clean it up and then press it onto the arbor of the new pump. If it's done wrong it can damage a pump and also pulleys get old and out of balance with time, so it's better to just have the new one on the pump. This one has the pulley so all we had to do was change out the pump and make sure to retighten the serpentine belt around the new pulley (we changed out the belt too - while we were in there). Easy!
Jonathan Schartung
Comentado en los Estados Unidos el 1 de abril de 2025
The holes in pulley are too small to put the mounting bolt all the way through… you will have to grind out the right side of one of the holes to get the bolt to go all the way in with enough room for the socket to fit on. I had to put it on figure this out remove and reinstall. I used a dremel with a grind wheel to make the hole bigger just on the right side of one of the holes about 3/16 bigger on the corner
Productos recomendados
Mex $515.99
Mex $ 237 .00 Mex $237.00
Mex $479.74
Mex $ 215 .00 Mex $215.00
Mex $2,356.77
Mex $ 1,036 .00 Mex $1,036.00
Mex $1,514.38
Mex $ 742 .00 Mex $742.00