No hay artículos en el carro
No hay artículos en el carro Compatible con los siguientes: BN125A Tipo 1, BN200A Tipo 1, BN200V12 Tipo 1, BN200V12 Tipo 2, NS100A Tipo 1, NS150A Tipo 1, NS150A Tipo 2
Materiales de alta calidad: hecho de materiales de alta calidad resistentes para una larga durabilidad y rendimiento.
Reemplaza tu sello dañado, evita las fugas de aire de tu pistola de uñas.
Proporciona un buen sellado para la válvula de cabeza.
Nota: si no estás seguro de si se ajusta a tu modelo, por favor envíanos un correo electrónico e incluye tus modelos y número de serie. Siempre garantizamos productos de alta calidad y buen servicio posventa.
[Servicio posventa] 30 días de garantía de devolución de dinero. Si tienes algún problema con la calidad o el uso, no dudes en ponerte en contacto con nosotros. Haremos todo lo posible para ayudarte a resolver el problema y ofrecerte una agradable experiencia de compra.
A. Juan
Comentado en los Estados Unidos el 21 de febrero de 2025
Unfortunately, in my case this cover also covers the light sensor and my center display. I needed to cut around these areas.
Paul Leslie
Comentado en Canadá el 10 de agosto de 2024
These o-rings are tight and seem impossible to get on to the gun head but drop them in some simmering hot water for about 30 seconds and roll them on while they're still hot/warm. My gun is working fine now so all that's left to assess is their durability.
Paul Leslie
Comentado en Canadá el 10 de agosto de 2024
These o-rings are tight and seem impossible to get on to the gun head but drop them in some simmering hot water for about 30 seconds and roll them on while they're still hot/warm. My gun is working fine now so all that's left to assess is their durability.
Paul Leslie
Comentado en Canadá el 10 de agosto de 2024
These o-rings are tight and seem impossible to get on to the gun head but drop them in some simmering hot water for about 30 seconds and roll them on while they're still hot/warm. My gun is working fine now so all that's left to assess is their durability.
Paul Leslie
Comentado en Canadá el 10 de agosto de 2024
These o-rings are tight and seem impossible to get on to the gun head but drop them in some simmering hot water for about 30 seconds and roll them on while they're still hot/warm. My gun is working fine now so all that's left to assess is their durability.
Paul Leslie
Comentado en Canadá el 10 de agosto de 2024
These o-rings are tight and seem impossible to get on to the gun head but drop them in some simmering hot water for about 30 seconds and roll them on while they're still hot/warm. My gun is working fine now so all that's left to assess is their durability.
Paul Leslie
Comentado en Canadá el 10 de agosto de 2024
These o-rings are tight and seem impossible to get on to the gun head but drop them in some simmering hot water for about 30 seconds and roll them on while they're still hot/warm. My gun is working fine now so all that's left to assess is their durability.
Paul Leslie
Comentado en Canadá el 10 de agosto de 2024
These o-rings are tight and seem impossible to get on to the gun head but drop them in some simmering hot water for about 30 seconds and roll them on while they're still hot/warm. My gun is working fine now so all that's left to assess is their durability.
Paul Leslie
Comentado en Canadá el 10 de agosto de 2024
These o-rings are tight and seem impossible to get on to the gun head but drop them in some simmering hot water for about 30 seconds and roll them on while they're still hot/warm. My gun is working fine now so all that's left to assess is their durability.
Cheryl
Comentado en los Estados Unidos el 5 de junio de 2024
Perfect fit just like they said. Will protect from the sun and looks great!
Bigsaw
Comentado en Canadá el 8 de marzo de 2024
wrong size for model
Bigsaw
Comentado en Canadá el 8 de marzo de 2024
wrong size for model
Bigsaw
Comentado en Canadá el 8 de marzo de 2024
wrong size for model
Bigsaw
Comentado en Canadá el 8 de marzo de 2024
wrong size for model
Bigsaw
Comentado en Canadá el 8 de marzo de 2024
wrong size for model
Bigsaw
Comentado en Canadá el 8 de marzo de 2024
wrong size for model
Bigsaw
Comentado en Canadá el 8 de marzo de 2024
wrong size for model
Bigsaw
Comentado en Canadá el 8 de marzo de 2024
wrong size for model
Very satisfied
Comentado en los Estados Unidos el 6 de diciembre de 2024
This makes an old cracked dashboard look good again. Good quality and good fit.
Derek
Comentado en Canadá el 12 de abril de 2024
says for bn200a porter cable it is not very unhappy
Derek
Comentado en Canadá el 12 de abril de 2024
says for bn200a porter cable it is not very unhappy
Derek
Comentado en Canadá el 12 de abril de 2024
says for bn200a porter cable it is not very unhappy
Derek
Comentado en Canadá el 12 de abril de 2024
says for bn200a porter cable it is not very unhappy
Derek
Comentado en Canadá el 12 de abril de 2024
says for bn200a porter cable it is not very unhappy
Derek
Comentado en Canadá el 12 de abril de 2024
says for bn200a porter cable it is not very unhappy
Derek
Comentado en Canadá el 12 de abril de 2024
says for bn200a porter cable it is not very unhappy
Derek
Comentado en Canadá el 12 de abril de 2024
says for bn200a porter cable it is not very unhappy
Jeff
Comentado en los Estados Unidos el 24 de noviembre de 2023
The original O-Ring in my PC BN125A Nailer had completely dry rotted and broken into pieces. Of course, this rendered the nail gun unusable. This O-Ring fixed my problem. Installation took less than 15 minutes to complete, and the nail gun is back in service. Just removed 4 screws from the cap covering the piston, removed the cap, put the new O-Ring in the piston tube, screwed the cap back one, and all was good to go.
Jeff
Comentado en los Estados Unidos el 24 de noviembre de 2023
The original O-Ring in my PC BN125A Nailer had completely dry rotted and broken into pieces. Of course, this rendered the nail gun unusable. This O-Ring fixed my problem. Installation took less than 15 minutes to complete, and the nail gun is back in service. Just removed 4 screws from the cap covering the piston, removed the cap, put the new O-Ring in the piston tube, screwed the cap back one, and all was good to go.
Jeff
Comentado en los Estados Unidos el 24 de noviembre de 2023
The original O-Ring in my PC BN125A Nailer had completely dry rotted and broken into pieces. Of course, this rendered the nail gun unusable. This O-Ring fixed my problem. Installation took less than 15 minutes to complete, and the nail gun is back in service. Just removed 4 screws from the cap covering the piston, removed the cap, put the new O-Ring in the piston tube, screwed the cap back one, and all was good to go.
Jeff
Comentado en los Estados Unidos el 24 de noviembre de 2023
The original O-Ring in my PC BN125A Nailer had completely dry rotted and broken into pieces. Of course, this rendered the nail gun unusable. This O-Ring fixed my problem. Installation took less than 15 minutes to complete, and the nail gun is back in service. Just removed 4 screws from the cap covering the piston, removed the cap, put the new O-Ring in the piston tube, screwed the cap back one, and all was good to go.
Jeff
Comentado en los Estados Unidos el 24 de noviembre de 2023
The original O-Ring in my PC BN125A Nailer had completely dry rotted and broken into pieces. Of course, this rendered the nail gun unusable. This O-Ring fixed my problem. Installation took less than 15 minutes to complete, and the nail gun is back in service. Just removed 4 screws from the cap covering the piston, removed the cap, put the new O-Ring in the piston tube, screwed the cap back one, and all was good to go.
Jeff
Comentado en los Estados Unidos el 24 de noviembre de 2023
The original O-Ring in my PC BN125A Nailer had completely dry rotted and broken into pieces. Of course, this rendered the nail gun unusable. This O-Ring fixed my problem. Installation took less than 15 minutes to complete, and the nail gun is back in service. Just removed 4 screws from the cap covering the piston, removed the cap, put the new O-Ring in the piston tube, screwed the cap back one, and all was good to go.
Jeff
Comentado en los Estados Unidos el 24 de noviembre de 2023
The original O-Ring in my PC BN125A Nailer had completely dry rotted and broken into pieces. Of course, this rendered the nail gun unusable. This O-Ring fixed my problem. Installation took less than 15 minutes to complete, and the nail gun is back in service. Just removed 4 screws from the cap covering the piston, removed the cap, put the new O-Ring in the piston tube, screwed the cap back one, and all was good to go.
Jeff
Comentado en los Estados Unidos el 24 de noviembre de 2023
The original O-Ring in my PC BN125A Nailer had completely dry rotted and broken into pieces. Of course, this rendered the nail gun unusable. This O-Ring fixed my problem. Installation took less than 15 minutes to complete, and the nail gun is back in service. Just removed 4 screws from the cap covering the piston, removed the cap, put the new O-Ring in the piston tube, screwed the cap back one, and all was good to go.
William York
Comentado en los Estados Unidos el 18 de octubre de 2023
My own fault - should have read the description more carefully. Based on the picture, I was expecting 5 O rings, but only received a single O ring.
William York
Comentado en los Estados Unidos el 18 de octubre de 2023
My own fault - should have read the description more carefully. Based on the picture, I was expecting 5 O rings, but only received a single O ring.
William York
Comentado en los Estados Unidos el 18 de octubre de 2023
My own fault - should have read the description more carefully. Based on the picture, I was expecting 5 O rings, but only received a single O ring.
William York
Comentado en los Estados Unidos el 18 de octubre de 2023
My own fault - should have read the description more carefully. Based on the picture, I was expecting 5 O rings, but only received a single O ring.
William York
Comentado en los Estados Unidos el 18 de octubre de 2023
My own fault - should have read the description more carefully. Based on the picture, I was expecting 5 O rings, but only received a single O ring.
William York
Comentado en los Estados Unidos el 18 de octubre de 2023
My own fault - should have read the description more carefully. Based on the picture, I was expecting 5 O rings, but only received a single O ring.
William York
Comentado en los Estados Unidos el 18 de octubre de 2023
My own fault - should have read the description more carefully. Based on the picture, I was expecting 5 O rings, but only received a single O ring.
William York
Comentado en los Estados Unidos el 18 de octubre de 2023
My own fault - should have read the description more carefully. Based on the picture, I was expecting 5 O rings, but only received a single O ring.
Productos recomendados
Mex $270.99
Mex $ 138 .00 Mex $138.00
Mex $513.13
Mex $ 277 .00 Mex $277.00
Mex $338.31
Mex $ 165 .00 Mex $165.00
Mex $402.77
Mex $ 201 .00 Mex $201.00
Mex $340.03
Mex $ 166 .00 Mex $166.00