Black & White Board Book: A High Contrast Book For Newborns

Love the book

Ideal para estimular visualmente a los bebés, cuando todavía no ven la mayoría de colores. Al ser imágenes en blanco y negro con alto contraste les llama mucho la atención, y les motiva para girar la cabeza y levantarla. Se quedan atentos mirando, así que también sirve para entretenerlos durante tareas como el cambio del pañal. Además, al desplegarse como un acordeón, se mantiene solo y no hace falta estar sujetándolo. A mi hija le encantaba, y lo he regalado varias veces y siempre ha sido un acierto.

I bought this for my husband this is the 2 nd time we have had this brand. He can see everything the quality is great definitely recommend

Me gustó porque trae una correas elásticas para colocarlo en la muñeca y poder utilizar las 2 manos, no había encontrado algún multímetro de bajo costo con esta función, yo solo lo ocupo para revisar voltajes en DC, AC y algunas veces continuidad.

Good quality and sturdy enough to stand alone. The babies love this book. Great for them to focus on when they are lying on their playmat. Lots of smiles too.

De buen tamaño, funcional.

Great product great service

Had it for my kids, and got it for a baby friend

Se ve de buena calidad aun no lo e probado llego a tiempo

Wurde von unserer Kleinen geliebt und intensiv studiert von Beginn an. Es sind sowohl Bilder mit vielen Kontrasten wie ein Schmetterling als auch einfachere Bilder dabei wie zb Knöpfe. Perfekt für Neugeborene, die nur Schwarz-Weiß sehen können.Auch jetzt mit knapp 5 Monaten ist das Buch immer noch interessant. Besonders toll finde ich, dass es aufklappbar ist, man kann es überall aufstellen oder auch mal über einen Spielbogen legen (und so in Ruhe duschen, siehe Foto :)). Ich habe es direkt nochmal bestellt und meiner Freundin zur Geburt ihres Babys geschenkt. Auch dort wird es gut angenommen 😊

No es nada preciso

Es genial, de tamaño compacto y super sencillo de colocar en la muñeca, para el modo "manos libres"

I strongly recommend this multi-meter over the really cheap ones that you can buy. I ended up throwing out a cheaper meter because I couldn't rely on the voltage reading to even tell me if a battery was dead.This lovely device has settings for 1.5V, 9V and 12V so it suits batteries, including my motorcycle, perfectly.Best of all, the reading only varies by a fraction - as it should if the actual voltage is varying.I use it for resistance measurements and have found that reliable too.

Funciona exactamente para lo que debe.

practico y funcional, tiene todo lo necesario para trabajos en casa.

Funciona muy bien, la entrega súper rápida, el precio es muy competitivo comparable con truper y craftman, fácil de usar e incluye baterías.

Nerd Alert: I'm an electrical engineer and spend a lot of time in my test lab. I never heard of this brand, but thought I'd give it a go. I was drawn in by the attachment for spark pickup. I haven't used it exhaustively yet, just tried it and it worked on a motorcycle fine. I'll post back after more experience with it.Regarding the meter functions, it's pretty crazy how many functions this little meter has. I doubt I'll need all of them, but nice to know they are there if a difficult problem occurs on a repair. The temp gauge is nice, but I find for repairs a non-contact IR is much more effective. But, it's better than nothing. So, 5 stars for the multitude of functions. Dwell is really great for points ignition on old motorcycles and cars.I was checking calibration on equipment in my lab this week, so I checked this meter for the heck of it. I'm using a Fluke 5100B, and I was pretty surprised at the accuracy. Volts, Amps, Frequency, Duty Cycle, all spot on. Really, like So, for me, super functionality, super high accuracy, super price. Five Stars.

---10-23-2017 EDIT---I still have all 3 of my Innova 3320 multimeters, and they are still working great. Each one gets used a couple times a month on average, so they have more than paid for themselves over what has now been 6+ years of ownership. I also haven't felt a need to upgrade them in that time, so these 3 meters along with a 4th multimeter (that has a clamp style ammeter that I need occasionally) are all I own right now.There is a small quirk I have noticed with this meter, so I figured I would mention it in case anyone else has the same issue. Sometimes one of my meters will start giving a reading that is a bit erratic, almost like it's having a hard time knowing what it's supposed to do. Alternately, the autoranging feature will sometimes also become a bit sluggish in coming up with a final result to display. I mainly notice it when I'm working in DCV mode, and the issue pops up now and then on all 3 of my meters. Whenever one of my meters begins having this issue, a quick full rotation of the mode selection dial back and forth 5-6 times fixes the problem right up. I'm guessing there must be a little bit of dirt working down onto the sliding dial contacts (located directly underneath the mode selection dial) causing a poor electrical connection there over time. The dirt is probably getting in via the small gap around the dial itself. That dirt/residue is being scraped off by the sliding contacts when the dial is rotated back and forth a few times so that's why everything starts working perfectly again.Another thing I thought I would mention is that for the last couple years I have been using Eneloop rechargeable AA batteries in all 3 of my meters instead of regular disposable alkaline batteries. My meters all run perfectly on the Eneloops even though rechargeable AA batteries only put out 1.2vdc instead of 1.5vdc.---END OF EDIT---This is a great meter as long as you are getting it for the right tasks. The auto ranging feature works great as long as you are measuring something of a decent value whether it be resistance, voltage, etc. This is not the meter you would want for doing sensitive electronics, fine adjustments of electrical components, computer work, etc. This meter will not be accurate enough and consistent enough to be of much use for those types of applications. This meter is absolutely amazing for its price when it comes to doing (120vac) home electrical, automotive (12vdc) electrical troubleshooting, furnace troubleshooting (24vac), solar installation testing and troubleshooting (12-48vdc), etc. For electrical maintenance and installation tasks I almost exclusively use continuity, voltage, and resistance measurements to look for broken circuits, check for voltage loss across terminals due to corrosion, verify correct wiring after a new installation, etc. This meter also works great for testing automotive sensors for proper function. Most automotive sensors have resistance levels in the 400 to 700 ohm range when operating properly and this meter measures levels like that very consistently and accurately.Where this meter does falter a little is when you need to measure a very low resistance level or a very high level of resistance accurately. The auto ranging feature gets a little confused or slow, and is not good at giving the same result if the same test is repeated several times.The reason I am giving this meter 5 stars is because the issues with this meter are really not issues to me, because the situations that cause those issues can usually be worked around and 99% of the things I use this meter for work accurately and rapidly. I have used many high quality fluke meters and they work great in all situations, but they are also a lot more expensive. I will gladly give up 1% usability for a meter that is one fifth the price. I have also used meters that are cheaper than fluke meters and are still accurate in all situations, but they require you to set the range for every test done which adds time to everything and if you are wrong you can blow fuses, etc. This meter is fast, because I just turn the dial to the right mode, put the leads on and get a result I can use and I can move on.Another really nice feature I have never seen on another meter is the battery tester. It is great for rapidly testing to see if a spare battery you find in a drawer is a new one that became separated from its' package, or if it is a dead one that got lost on the way to the recycling bin.This meter is also nice because if you accidentally damage it or lose it you are not out much money. This meter works so perfectly for the tasks I need it for that I have bought 3 of them just in case they stop selling them, because there are no other meters I like as much as this one that cost less than $75. Then I am able to keep one in the car at all times for emergencies, one in the garage for working on cars, and one inside the home that stays nice and clean for home related tasks.