Carro de la compra

No hay artículos en el carro

No hay artículos en el carro

Bisagra de puerta de combustible con resorte de puerta de gas para 2009-2014 F150 2010-2014 Lincoln Mark LT suelta reparación permanente (metal)

Envío gratis en pedidos superiores a Mex $600.00

Mex $477.71

Mex $ 238 .00 Mex $238.00

En stock

Acerca de este artículo

  • (2022/5/15 Editado: El nuevo paquete viene con un nuevo resorte de puerta de combustible F150 RECUBIERTO) La tapa del tanque de gas no se mantendrá cerrada debido a una bisagra de plástico. No hay necesidad de reemplazar toda la tapa de la carcasa. Con nuestro kit de bisagra de aluminio rediseñado, te ayuda a fijar permanentemente tu puerta de combustible F150
  • ¿Por qué B Plan? Conexión roscada de aluminio fino no separado, no necesita lubricante ni adhesivos, resistente y reutilizable
  • Los kits de reparación permanente de bisagras de puerta de combustible F150 vienen con una bisagra de aluminio rediseñada y reutilizable (4ª edición que se muestra en la 5ª foto), un resorte de puerta de combustible F150, una arandela y un pasador de aleta tipo R, carcasa/bolsillo no está incluido
  • El diámetro del pasador es de 0.4 pulgadas, se adapta a: puerta de combustible F150 2009-2014, puerta de gas Fusion 2010-2012, puerta de combustible Lincoln Mark LT 2010-2014, MKZ 2010-2012, tapa de gas Milán 2010-2011
  • Este kit de pines de metal para bisagras de puerta de depósito de combustible F150 es una fijación permanente, muy fácil de instalar y menos costoso que reemplazar toda la puerta (que tendrá el mismo fallo). Incluso si tienes que reemplazar toda la puerta, puedes utilizar esta bisagra de metal para reemplazar la de plástico antes de instalarla en tu vehículo



Descripción del producto


Robert Dove
Comentado en los Estados Unidos el 1 de julio de 2024
Pin and spring assembly was disconnected on the fuel access door, apparently a common problem, causing the door to not close tightly. Replacing the pin assembly was the best option. This one is sturdy metal with cotter pin. A good value and better than replacing the whole housing assembly. Housing pops out without too much effort, you must access the tabs behind the wheel well while you pry inside the housing (by hand, did not need tools). Installing the new pin assembly was very easy. Reinstalling the housing was worrisome at first, as it seemed an impossible fit. Then it just popped right into place. Complete repair done in 20 minutes. Special note: When you pop out the housing, the fuel door will contact the side of your truck. Make sure you put painters tape and extra padding if possible. I only wrapped a shop rag over the door for padding, it was not enough and dinged the paint.
Creed
Comentado en Canadá el 25 de mayo de 2024
Pickup gas tank door
Cindy M.
Comentado en Canadá el 21 de junio de 2023
Won’t break works great
Mario Gagnon
Comentado en Canadá el 24 de abril de 2023
Parfait
Yokota
Comentado en los Estados Unidos el 16 de julio de 2021
Used this to fix the fuel cap on my 2010 F150 that wouldn't stay closed, I thought about just buying a replacement but a lot of the reviews for those are not favorable. So I decided to try this, overall it's a simple install with plenty of youtube videos to reference, took about 10-15 minutes total. the door now snaps closed as it should, it snagged a little the first couple of days but after opening and closing it 15-20 times it's a lot smoother now. Overall this was money well spent and I feel that the aluminum should outlast the OEM plastic, although that lasted 11 years.
Eduardo Alcocer
Comentado en México el 21 de diciembre de 2021
El kit es funcional y es de metal, debería ser mucho más resistente que el original de plástico.
Productos recomendados

Mex $767.01

Mex $ 391 .00 Mex $391.00

4.5
Elegir

Mex $194.56

Mex $ 112 .00 Mex $112.00

4.9
Elegir