No hay artículos en el carro
No hay artículos en el carro de material de excelente calidad, práctico, fácil de operar y usar, amplia gama de aplicaciones, tiene una larga vida útil.
Especificaciones:
Material: PCB
Color: negro
Voltaje de funcionamiento: 3,5-5,5 V
Corriente de funcionamiento: 50-130 mA
Distancia de detección: 30-50 mm / 1,2-2,0 pulgadas
Tiempo de lectura de la tarjeta: 0,2 s
Capacidad: 512 M
Tamaño del artículo: 86,6 * 54 mm/3,4 * 2,1 pulgadas
Tamaño del paquete: 152 * 102 * 40 mm/6,0 * 4,0 * 1,6 pulgadas
Peso del paquete: 188 g/6,6 onzas
La función principal de (común):
Alta frecuencia:
Modo de funcionamiento de la tarjeta:
1. Lector de tarjetas M1 S50 convencional y otra tarjeta 14443A Clase B.
2. Utilice el sector 0 de análisis de vulnerabilidad PRNG.
3. Utilice la vulnerabilidad anidada (mfoc) para resolver toda la tarjeta.
Modo de tarjeta analógica:
1. UID de tarjeta analógica Mi serie S50 / Ultraligera / DESFire.
2. Datos del sector completo analógico M1 S50. (Elija un lector de tarjetas)
3. Carcasa analógica M1 S50, para obtener datos para calcular la clave secreta (elija un lector de tarjetas).
Modo silencioso:
1. Comunicación de datos de rastreo silenciosa entre la tarjeta M1 S50 y el lector de tarjetas, clave secreta analítica.
2. Lector de tarjetas de rastreo silencioso 14443A Clase B con datos de comunicación completos.
El dispositivo lector se puede utilizar para depuración y análisis de comportamiento.
Baja frecuencia:
Modo de tarjeta operativa:
1. Leer T55XX, Indala y otras tarjetas de baja frecuencia.
2. Mediant
John Starlin
Comentado en los Estados Unidos el 9 de febrero de 2025
Very high quality table. I also ordered the matching router lift. Works great and very repeatable and easy to set up
Victor Hugo Valencia Rodriguez
Comentado en México el 26 de septiembre de 2024
No llega completo, falta el tablero qué es parte principal de la mesa
Der Hobler
Comentado en Alemania el 6 de febrero de 2021
Warum der Frästisch hier bedeutend günstiger als bei Sauter selbst ist, ist mir nicht klar. Über 50€!Mit dieser Preisgestaltung möchte sich der Sautershop wohl selbst abschaffen !?Das Produkt ist klasse!
Lars Kollmann
Comentado en Alemania el 7 de enero de 2021
Sorry, aber Fence und Platte sind eher aus der Abteilung „Spielzeug“. Tischplatte und Einsatz biegen sich deutlich bei Einsatz einer stino Triton. Die Befestigung und Führung des Schlittens ist ziemlich windig.Hatte die Fräse vorher in einer 25mm Multiplexplatte an der GTS 10 hängen - kostet 13 Euro und ist deutlich stabiler.Fazit: Besser in einen Frästisch aus Aluminium investieren oder selbst bauen.
BeK
Comentado en los Estados Unidos el 18 de diciembre de 2020
My fence was shipped with two boxes of small parts that contained identical parts. I was missing the fence clamp and mounting plate and associated bits and pieces. Someone was asleep during packaging up the product.I contacted Kreg with the issue. After waiting a it too long and prodding via the phone, someone got back to me and sent out a package. I had asked if they knew what I needed and really got no response even though I described in detail what I had received. I didn't want to end up not getting everything required.Well, a few days later I received a package with almost everything I needed. They did not ship a critical part. Ugh. It took several days and a few attempts to get through to Kreg yet again. Once I did they got it taken care of (not received yet, but do not doubt it is on its way).Feedback for Kreg CS. Some better attentiveness the first time around would have avoided having to go through this exercise twice. It was easily avoidable. To their credit, Kreg customer service, once they responded, were very helpful and gracious. It did take some time to get their attention each time, but with a little patience, they did come through.The product itself seems well manufactured and sturdy. It pairs well with the Kreg Professional router table top.Overall 5 stars, but just. Cutting them a little slack on the mishap with packaging (it happens) and dropping the ball during the CS opportunity. They recovered, and nobody got hurt in the process, and I think it is a decent product. I've had a few issues with Kreg packaging now. I like the products, generally, and CS seems good, but packaging is sketchy.UPDATE: I received the missing piece, the rail that attaches to the table against which the fence locking block slides. It was damaged. Very disappointing. While it had not been properly packaged, it was clear the damage was there before it was put in the box. There was nothing else in the box to cause the damage. The aluminum was gouged and very rough in two places a few inches long along the bottom edge. I wondered if it was a factory second pulled out of somewhere. I decided it would not impact functionality and proceeded to install it. Frankly, I'm done with what has been a several week project that should have taken 1-2 hours. I could have fabricated my own router table a few times by now.I am leaving the product rating as is although I really should take off a star. To Kreg, I really hope someone from your company that cares reads this: while CS has been responsive and helpful once you get their attention, packaging has been an issue on the on each of the recent four Kreg products purchased. Each has had irritating design, manufacturing or attention to detail flaws all easily remedied. I carefully consider most purchases, and from here on out, extra scrutiny will he applied to Kreg offerings due to experiences over the past few months.
gabe menard
Comentado en Canadá el 5 de junio de 2019
Paired this table with a Jessem router lift. The original table top was missing everything but Normand tools quickly rectified the problem by ordering another table top with all the proper hardware. Kudos to Normand tools for customer service. I ended up ordering Jessem leveĺling pads because the Kreg ones didnt align properly with router lift. Table is solidly built and works well. I built some slide out drawers into the cabinet and the router worked flawlessly and accurately to create the gooves for the bottom of the drawer. All in all I am happy with this purchase.
Productos recomendados
Mex $268.00
Mex $ 160 .00 Mex $160.00
Mex $749.00
Mex $ 374 .00 Mex $374.00
Mex $609.65
Mex $ 310 .00 Mex $310.00