Carro de la compra

No hay artículos en el carro

No hay artículos en el carro

B&C Eagle ACR-1 - Clavos para techos (cabeza redonda, 1 pulgada x 0,120, mango suave, electrogalvanizados, 1080 por caja)

Envío gratis en pedidos superiores a Mex $600.00

Mex $1,151.07

Mex $ 552 .00 Mex $552.00

En stock
  • Para uso en clavadoras de techo de bobina de 15 grados
  • Los altos estándares de calidad evitan atascos, lo que te permite trabajar más rápido
  • Acabado electrogalvanizado que ayuda a resistir la corrosión y el óxido
  • La caja de menor cantidad ahorra dinero y reduce el desperdicio. La caja reutilizable ayuda a proteger el producto durante el almacenamiento
  • El embalaje nuevo y mejorado ayuda a proteger el producto durante el envío


Los sujetadores B&C Eagle están fabricados con los más altos estándares de calidad y están garantizados para trabajar en herramientas para las que están destinados. Nuestros sujetadores funcionan con muchas marcas de herramientas neumáticas como Bostitch, DeWALT, Senco, Paslode, Duo-Fast, Hitachi, Makita, Porter Cable y más. Si tu número de modelo de herramienta se enumera a continuación y nuestro sujetador encaja dentro del rango de tamaño de tu herramienta, nuestro sujetador funcionará. Utilizamos solo materiales y pegamentos de alta calidad para mantener los sujetadores juntos antes y durante el uso. Utilice sujetadores B&C Eagle para obtener más unidades positivas, menos atascos y calidad duradera. Asegúrate de seleccionar el revestimiento adecuado para tu aplicación. Los sujetadores brillantes solo deben usarse para aplicaciones interiores en madera no tratada. Los sujetadores galvanizados por inmersión en caliente son para aplicaciones interiores o exteriores en madera tratada. Para la mejor protección contra la corrosión disponible, utilice siempre sujetadores de acero inoxidable. Visite nuestro sitio web en www.bandceagle.com o llámenos para obtener más información técnica o si tiene alguna pregunta sobre nuestros sujetadores. ***A partir del 1 de julio de 2013 hemos actualizado todos nuestros embalajes. Compra con confianza que recibirás nuestro producto enviado desde AMAZON.COM intacto. *** Estos sujetadores están diseñados para adaptarse a: B&C Eagle: CN45R, BEA: 554C, Bostitch: N12B, RN45B, RN46-1, Campbell Hausfeld: NC1545, RN164599AV, DeWALT: D51321, Duo-Fast: DRN-45, RN-175A. achi: NV45 AB, NV45AB2, NV45AB2S, NV45AC, NV45AE, Makita: AN451, AN453, Max: CN445R, CN450R, Paslode: 3175/44RCU, 3175RCU, R175C, Porta-Nails: 670, Porter Cable: RN175, RN175. 5A, RN1. 75B, Ridgid: R175RNA, Senco: ROOFPRO 450, ROOFPRO 455XP, SCN40R, Spotnail: VRN45, WEN: 61780, 61782. Por favor, consulta el manual del propietario de tu herramienta para conocer las variaciones de tamaño. Para obtener la lista más actualizada de herramientas con las que este sujetador es compatible, visite nuestro sitio web en www.bandceagle.com


dragonlord
Comentado en los Estados Unidos el 16 de julio de 2024
I recently used the B&C Eagle ACR-1 Round Head Coil Roofing Nails for a roofing project, and they exceeded my expectations. The nails are electrogalvanized, providing great resistance to rust, which is crucial for outdoor use.One thing I really appreciated was the smooth shank, which made driving the nails into the roofing material much easier. They held the shingles securely, and there was no sign of any slipping or loosening, even in windy conditions.Using these nails with my coil nailer was a breeze. They fed smoothly and didn’t jam once, which saved me a lot of time and frustration. The round heads also provided a nice, clean finish, which added to the overall professional look of the roof.However, I did notice that if you’re not careful with the pressure settings on your nailer, you might end up over-driving the nails, especially in softer materials. A little adjustment and testing beforehand can prevent this issue.For anyone tackling a roofing project, these nails are a reliable choice. They combine durability, ease of use, and a great finish, making them a valuable addition to any DIY toolkit.
Al Plante
Comentado en Canadá el 13 de enero de 2024
Used them to shingle my front porch witch is 3/4 tongue and groove so they don’t poke through
Texas Customer
Comentado en los Estados Unidos el 5 de abril de 2024
I bought the cheapest nail gun I could find to put shingles on my shed roof. These nails worked well for the job.
Ronaldo Limbag
Comentado en Canadá el 28 de junio de 2023
Work okay with my Dewalt.
Ski
Comentado en los Estados Unidos el 9 de octubre de 2018
One box of 1" nails does about 2.5 - 3 square @ 6 nails per shingle. These are suitable for mobile home or other 15/32" roof deck. Most roof deck, 5/8" or thicker (24" rafter spacing), require at least 1.25" length nails.(From personal experience, 1" work just fine in a 3/4" OSB roof deck. My 22 year old 20-year 3-tab shingles have gone through at least a dozen hurricanes, and only now had a few tabs go missing. Not one complete shingle had any indication of lifting. I didn't want the nails to penetrate since there is a low clearance storage loft underneath that roof. An inspector, gov't or otherwise, will want to see penetration from each nail.)It is very frustrating that the longer nail sizes are not available for next day or 2nd day delivery in this package size... Only need a small amount of longer nails for ridge vent/cap.These worked well in cheap Wen 61782 coil nailer.If you are doing 5 square or more, there are better priced options.An extra box turned out to be a nice barter item. These are easily worth a sheet of plywood if the other guy can use 'em.
Productos recomendados

Mex $819.29

Mex $ 417 .00 Mex $417.00

4.4
Elegir

Mex $600.00

Mex $ 324 .00 Mex $324.00

4.5
Elegir

Mex $1,090.43

Mex $ 577 .00 Mex $577.00

4.8
Elegir