No hay artículos en el carro
No hay artículos en el carroDescripción del producto
Voltaje del sistema: Corriente de carga nominal de 12 V/24 V: Corriente de carga 10ARAT: 10 AMax. Potencia de entrada PV/voltaje: 150 W (12 V) / 300 W (24 V). Temperatura de trabajo: -90 °F - 113 °F. Tipo de tierra: Positivo
Chip de control principal de alta velocidad de 32 bits, carga más rápida y estable, protege tu sistema de energía solar
Pequeño y ligero, fácil de transportar e instalar, la mejor opción para uso en exteriores
6 accesorios de cableado hacen que el cableado funcione rápido, fácil, seguro y estable
S B.
Comentado en los Estados Unidos el 22 de noviembre de 2024
Works perfect
Charles Bergeyre
Comentado en México el 29 de agosto de 2023
Este controlador de carga solar cumple al 100% lo que promete, es totalmente compatible con baterías de todo tipo incluyendo las de Litio-Ion, es fácil y rápido de programar, la calidad es muy buena e incluye terminales tipo espada para hacer más fácil la conexión de los cables en la bornera, el fabricante "Bateria Power" ofrece otros componentes fotovoltaicos de excelente calidad que valen la pena ser considerados para cualquier tipo de proyecto de esta índole, le pongo 5 estrellas por la relación precio-calidad.
Customer
Comentado en México el 23 de junio de 2023
Tomando en cuenta que es un controlador económico (no el más), para mí pequeño proyecto se ve bastante bien y funciona. Mi única crítica es que navegar en el menú para modificar parámetros es complicado.
Marc Ellus
Comentado en los Estados Unidos el 8 de abril de 2023
Wow, connections are so micro NO solar wire will connect to them! Shocked that anyone would build and try to sell this - screen is so small as well with NO description of what you are looking at. This might work with a miniature solar panel, but NOT normal one.
ucsfsmile
Comentado en los Estados Unidos el 2 de agosto de 2022
I purchased this unit after I first purchased a 10 amp Renogy Wanderer that failed to work. I decided it was time to upgrade my travel trailer to Lithium Iron Phosphate and so I purchased the Renogy solar controller for my 100 watt system. I charged the Lithium battery using a 110 VAC charger specifically for Lithium batteries prior to leaving on a camping trip. Unfortunately, after 3 days, the battery was almost dead. Fortunately, I have a 2000 watt inverter that I use for my microwave and was able to charge the battery daily for the rest of the trip. When I got home, I immediately contacted Renogy, but it took so much time for them to act that I purchased this Bateria Power Solar Controller. I was going on another camping trip and couldn't wait for Renogy to decide what to do. I informed the tech representative that I had purchased this unit and it worked fine. Only then did Renogy decide to send me a replacement unit. Fortunately, I have another use for the Renogy replacement. By the way, I did connect the replacement Renogy Wanderer that the company sent and it worked fine.
Karl A Perry
Comentado en los Estados Unidos el 7 de febrero de 2022
I got this to charge a new LiFePO4 battery for a solar-sourced 10' LED strip in my shed. I have a solar panel on the roof, this charge controller, the battery, and a motion sensor so when I walk into the shed the light automatically comes on and 5 minutes later it goes back off. That saves me the grief of forgetting to turn off a switch and ruining a battery. I only go into the shed occasionally so this is a great setup.Originally I had a lead-acid (SLA) battery in the mix and bought an inexpensive charge controller that only charges those type of batteries. My SLA battery died after 18 months and decided to try LiFePO4 instead as it advertises a much longer life, but I needed to replace the charge controller as well. This was the least-expensive one that had the control features I wanted.Installation was simple - I simply unplugged the leads from the old controller and plugged them into the new one. I first plugged in the battery and with a couple of presses of the one control button I had it set for LiFePO4. Then I plugged in the other two as directed by the simple-to-read instructions.PROS- Compact. IT's only 3x4 inches, and about 3/4" inch thick. Four screw holes make for simple mounting.- Very simple interface.- User guide is easy to follow, unlike many of this type of device. It was simple to set up for my lithium battery.- Easy-to-read LCD screen.- Came with six spade terminals. I didn't need to use all of them so now they're handy spares in my electrical toolkit.CONS- None found so far.I'll follow up in a year with a longevity report.Recommended.Notes on the setup, for those who care:I connected the + and - battery leads directly to the controller, then set the controller for the battery type.I connected the + and - solar panel leads directly to the controller.I combined the - leads of the and the motion detector on one spade lug and connected to the - "load" port of the controller.I attached the + of the LED strip to the "source" + lead from the motion detector, and the + "load" lead from the motion detector to the + "load" port of the controller. This forms a switch circuit with the motion detector providing the switching when it detects motion.The solar panel charges the battery through the controller, and the controller controls whether the panel or the battery provides electricity to the motion detector and thus the LED strip.I have an 8Ah LiFePO4 battery in the box behind the controller. Since I'm only ever in the shed a few minutes at a time, this is sufficient to provide plenty of light when I need it, and I never have to worry about a manual switch.
Kindle Customer
Comentado en los Estados Unidos el 9 de noviembre de 2022
If space is an issue, this is great, it is tiny. Despite a 6 space connector bar that is only a couple of inches long I could use 12 ga wiring which was necessary for strength as opposed to capacity. The screen is 1.25 x .75 inches so again....tiny. The biggest negative is no way to tell the voltage of the solar panel which seems a necessity and not being able to tell the voltage from the controller to the battery which is necessary to see if the controller is even working properly , the only voltage is the state of charge of the battery ...so yes, you can tell if it is fully charged but you can't tell what stage of charge you are on.So, okay for a cheap unit but severely lacking basics imho.
Productos recomendados
Mex $429.03
Mex $ 223 .00 Mex $223.00
Mex $1,146.34
Mex $ 458 .00 Mex $458.00
Mex $3,231.99
Mex $ 1,583 .00 Mex $1,583.00
Mex $808.00
Mex $ 428 .00 Mex $428.00
Mex $489.00
Mex $ 220 .00 Mex $220.00