Carro de la compra

No hay artículos en el carro

No hay artículos en el carro

Armstrong Placa de circuito de control del ventilador de horno (# R40403-003)

Envío gratis en pedidos superiores a Mex $600.00

Mex $2,701.32

Mex $ 1,107 .00 Mex $1,107.00

En stock
  • Reemplaza: R40403-001, R40403-002, 20054502
  • Voltaje de línea de funcionamiento: 85 a 135 VAC, 50/60Hz
  • Voltaje de control secundario: 18.0 a 30.0 VAC, 50/60Hz
  • Carga máxima del ventilador: 15FLA, 30LRA @ 120 VAC; 7.5FLA, 15LRA @ 240 VCA
  • Carga máxima del inductor: 3FLA, 10LRA @ 120 VAC; 1.5FLA, 5LRA @ 240 VCA


El control de soplador Armstrong R40403-003 reemplaza todos los controles de soplador 40403-001, 40403-002 y ST9120A, B o C. El control del ventilador R40403-003 proporciona salidas para un motor de ventilador interior de 2 velocidades y motor inductor de una sola velocidad. El control recibe entradas del termostato (W, Y y G), interruptor de presión e interruptores de límite de alta temperatura. El control también proporciona retrasos seleccionables por el usuario a través de la configuración del interruptor DIP. El circuito de 24 voltios de este control está protegido por un fusible reemplazable de 5 amperios. Compatible con: EG7H100DC20-1, EG6G50DC8-4, EG6G75DC8-4, EG6G75DC10-4, EG6G100DC12-4, EG6G100DC20-4, EG6G125DC12-4, EG6G125DC20-4, EG6G150 g g DC20-4, EG6G75DC16-4, EG6G50DC14-4, EG8G50DC8-1, EG8G75DC10-1, EG8G75DC12-1, EG8G100DC14-1, EG8G100DC16-1, EG8G125DC14-, EG8GG125DC20-1, EG8G150DC20-1, EG8G50DC14-1, EG8G100DC20-1, EG8G75DC16-1, EG8G50DC8-2, EG8G75DC12-2, EG8G100DC14-2, EG8G125. DCDCDC4-24-, EG8G50DC14-2, EG7G50DC8-1, EG7G75DC10-1, EG7G100DC14-1, EG7G100DC16-1, EG7G125DC20-1, EG7G150DC20-1, EG5G100DC12-1, EG5G125 5 DC16-1, EG5G150DC20-1, EG5G75DC12-1, EG6H40DC8-1, EG6H40DC14-1, EG6H60DC8-1, EG6H60DC14-1, EG6H80DC14-1, EG6H80DC20-1, EGH100 H10DC20-1, EDG6H40DC8-1, EDG6H60DC8-1, EDG6H60DC14-1, EDG6H80DC14-1, EDG6H100DC20-1, EG7H40DC12-1, EG7H60DC14-1, EG7H80DC11. 6-1, EGEGEG7H100DC20-1, GUJ050D10-1, GUJ075D10-1, GUJ075D14-1, GUJ100D12-1, GUJ100D14-1, GUJ100D20-1, GUJ125D14-1, GUJ125D22 y 1, GUJ150D20-1, GUJ075D09-1, GUJ050D10L-1, GUJ075D10L-1, GUJ075D14L-1, GUJ100D12L-1, GUJ100D14L-1, GUJ100D20L-1, GUJ125D4L-1, GUJ125D20L-1, GUJ150D20L-1, GUJ075D09L-1, GUJ050D10-2, GUJ075D10-2, GUJ075D14-2, GUJ100D12-2, GUJ100D14-2, GUJ100D22 y 2, GUJ125D14-2, GUJ125D20-2, GUJ150D20-2, GUJ075D09-2, GUJ050D10L-2, GUJ075D10L-2, GUJ075D14L-2, GUJ100D12L-2, GUJ100D4L-2, 4L-2, GUJ100D20L-2, GUJ125D14L-2, GUJ125D20L-2, GUJ150D20L-2, GUJ075D09L-2, GUJ050D10-3, GUJ075D10-3, GUJ075D14-3, GUJ100D2 y 3 y 3 GUJ100D14-3, GUJ100D20-3, GUJ125D14-3, GUJ125D20-3, GUJ150D20-3, GUJ075D09-3, GUJ050D10L-3 y muchos más modelos.


Customer
Comentado en los Estados Unidos el 18 de abril de 2025
Give us a five star replace this motherboard in my furnace works fine ever since we replaced it recommend us
Christopher A Hollins
Comentado en los Estados Unidos el 10 de noviembre de 2024
Good instructions and well packaged. I discounted the old board with all wires attached, mounted the new one and replaced the wires one at a time. The furnace fired right up! Professional HVAC wanted over $800 for repair, I saved a ton of money doing it myself.
wayne callihoo
Comentado en Canadá el 21 de marzo de 2022
A relay went on my Ducane furnace so needed to replace the printed circuit board. item arrived quick. came with instructions. replaced and works great. recommended.
Lindsay Walsh
Comentado en Canadá el 25 de octubre de 2022
This part arrived before the tracking was updated, which is great (it was estimated to take over a week originally)! Works perfectly either my old Ducane furnace and got it running!
Vinny
Comentado en los Estados Unidos el 22 de septiembre de 2018
Furnace model: Armstrong Ultra SX 80 (Model number GUJ075D14-1AControl board: Honeywell ST9120A2004 (Armstrong part R40403-001)About a week ago, the furnace inducer motor began cutting in and out at the beginning of a heating cycle. A few days later, the furnace wouldn't even begin to start. A look at the control board determined that it was the problem. Various HVAC contractors wanted north of $550 to replace the board, so I decided to look into replacing it myself. For $70, this board is a steal in comparison.Installation:Replacing the board was simple. Before anything else, turn the power off to the furnace at the breaker. I just unscrewed the board from the furnace, leaving everything connected, and moved one lead at a time from the old board. For those with older boards (other reviewers have mentioned this), you'll need to make sure you've connected the transformer leads correctly. The new board has three leads for the transformer section, one labeled C and two labeled X. The X lead coming off the old board needs to go to the X terminal labeled XFRMR.After checking the wiring diagram included with the board and adjusting the DIP switches to match the old ones, I turned power back on, cranked up the thermostat, and the furnace fired right up.Conclusion:This board works exactly as expected and saved a ton of money. The amount HVAC contractors want for doing the same thing is nothing short of obscene. Don't be afraid of trying this one yourselves, you wallet will thank you (and, in my case, my very cold wife).
Productos recomendados

Mex $3,294.69

Mex $ 1,317 .00 Mex $1,317.00

5.0
Elegir

Mex $11,336.93

Mex $ 1,881 .00 Mex $1,881.00

4.3
Elegir

Mex $3,836.03

Mex $ 1,841 .00 Mex $1,841.00

4.6
Elegir

Mex $833.37

Mex $ 400 .00 Mex $400.00

5.0
Elegir