No hay artículos en el carro
No hay artículos en el carroEste llave de cocina de alta calidad de APPASO está hecho para mayor utilidad y durabilidad. Hecho de acero inoxidable con un acabado de níquel cepillado, tiene dos asas a juego y una boquilla de arco alto para un amplio espacio de trabajo debajo.
TroyTali
Comentado en los Estados Unidos el 3 de marzo de 2025
Sometimes we don't get what we pay for...in that sometimes one can get a great product for less. This is a great example. This faucet installed very easily, is very smooth and functions very well. Much better than what we had originally.
Anthony Minier
Comentado en los Estados Unidos el 3 de marzo de 2025
When I moved into my current home, the kitchen sink had a standard 3 hole faucet that had the hot water knob left of the spout and the cold water knob to the right of the spout. It had become obvious in the past few months that that kitchen faucet has seen much better days and the time had come to look for a replacement. It hasn't occurred to me that the hot and cold running water knobslevers can be combined into one hole while the middle hole would still have the faucets spout and the left hold could have a dish or hand soap pump dispenser. To top off all of the modern features, the faucet spout has a removable and adjustable sprayer that is at the end of a 20 inch house. This sink meets or exceeds the latest round of California water conversation laws and so far it has been a joy to use. The installation wasn't all that hard but I am getting tired of manufacturers who think it is okay to have the installation instructions in small pictures with no words. This only serves to confuse everyone but a small pamphlet would have really helped . Words matter and that is no more evident than when trying to follow these small pictures and not making a whole lot of headway. For the most part, the installation was just me and I fixed the little issues That needed correction. It did not help that I was having a tough time fitting my hands where they need to go but that is not the fault of the faucet but rather poor design of the physical sink. At times it was a bit frustrating but as time progressed everything fell into place and I now have a very nice looking and functioning kitchen sink. Was it worth the DIY adventure? I was getting very frustrated trying to contort my body into a folded up position under the sink but that type of torture is built-in to installing new kitchen faucets. No matter what brand you buy, you are still going to have to contort yourself into impossible positions. This brand uses newer technologies that try to make the installation as simple as possible and it did help. I am glad it is all behind me now and I really do like how this new sink looks and functions.
TroyTali
Comentado en los Estados Unidos el 3 de marzo de 2025
Sometimes we don't get what we pay for...in that sometimes one can get a great product for less. This is a great example. This faucet installed very easily, is very smooth and functions very well. Much better than what we had originally.
Anthony Minier
Comentado en los Estados Unidos el 3 de marzo de 2025
When I moved into my current home, the kitchen sink had a standard 3 hole faucet that had the hot water knob left of the spout and the cold water knob to the right of the spout. It had become obvious in the past few months that that kitchen faucet has seen much better days and the time had come to look for a replacement. It hasn't occurred to me that the hot and cold running water knobslevers can be combined into one hole while the middle hole would still have the faucets spout and the left hold could have a dish or hand soap pump dispenser. To top off all of the modern features, the faucet spout has a removable and adjustable sprayer that is at the end of a 20 inch house. This sink meets or exceeds the latest round of California water conversation laws and so far it has been a joy to use. The installation wasn't all that hard but I am getting tired of manufacturers who think it is okay to have the installation instructions in small pictures with no words. This only serves to confuse everyone but a small pamphlet would have really helped . Words matter and that is no more evident than when trying to follow these small pictures and not making a whole lot of headway. For the most part, the installation was just me and I fixed the little issues That needed correction. It did not help that I was having a tough time fitting my hands where they need to go but that is not the fault of the faucet but rather poor design of the physical sink. At times it was a bit frustrating but as time progressed everything fell into place and I now have a very nice looking and functioning kitchen sink. Was it worth the DIY adventure? I was getting very frustrated trying to contort my body into a folded up position under the sink but that type of torture is built-in to installing new kitchen faucets. No matter what brand you buy, you are still going to have to contort yourself into impossible positions. This brand uses newer technologies that try to make the installation as simple as possible and it did help. I am glad it is all behind me now and I really do like how this new sink looks and functions.
TroyTali
Comentado en los Estados Unidos el 3 de marzo de 2025
Sometimes we don't get what we pay for...in that sometimes one can get a great product for less. This is a great example. This faucet installed very easily, is very smooth and functions very well. Much better than what we had originally.
Anthony Minier
Comentado en los Estados Unidos el 3 de marzo de 2025
When I moved into my current home, the kitchen sink had a standard 3 hole faucet that had the hot water knob left of the spout and the cold water knob to the right of the spout. It had become obvious in the past few months that that kitchen faucet has seen much better days and the time had come to look for a replacement. It hasn't occurred to me that the hot and cold running water knobslevers can be combined into one hole while the middle hole would still have the faucets spout and the left hold could have a dish or hand soap pump dispenser. To top off all of the modern features, the faucet spout has a removable and adjustable sprayer that is at the end of a 20 inch house. This sink meets or exceeds the latest round of California water conversation laws and so far it has been a joy to use. The installation wasn't all that hard but I am getting tired of manufacturers who think it is okay to have the installation instructions in small pictures with no words. This only serves to confuse everyone but a small pamphlet would have really helped . Words matter and that is no more evident than when trying to follow these small pictures and not making a whole lot of headway. For the most part, the installation was just me and I fixed the little issues That needed correction. It did not help that I was having a tough time fitting my hands where they need to go but that is not the fault of the faucet but rather poor design of the physical sink. At times it was a bit frustrating but as time progressed everything fell into place and I now have a very nice looking and functioning kitchen sink. Was it worth the DIY adventure? I was getting very frustrated trying to contort my body into a folded up position under the sink but that type of torture is built-in to installing new kitchen faucets. No matter what brand you buy, you are still going to have to contort yourself into impossible positions. This brand uses newer technologies that try to make the installation as simple as possible and it did help. I am glad it is all behind me now and I really do like how this new sink looks and functions.
TroyTali
Comentado en los Estados Unidos el 3 de marzo de 2025
Sometimes we don't get what we pay for...in that sometimes one can get a great product for less. This is a great example. This faucet installed very easily, is very smooth and functions very well. Much better than what we had originally.
Anthony Minier
Comentado en los Estados Unidos el 3 de marzo de 2025
When I moved into my current home, the kitchen sink had a standard 3 hole faucet that had the hot water knob left of the spout and the cold water knob to the right of the spout. It had become obvious in the past few months that that kitchen faucet has seen much better days and the time had come to look for a replacement. It hasn't occurred to me that the hot and cold running water knobslevers can be combined into one hole while the middle hole would still have the faucets spout and the left hold could have a dish or hand soap pump dispenser. To top off all of the modern features, the faucet spout has a removable and adjustable sprayer that is at the end of a 20 inch house. This sink meets or exceeds the latest round of California water conversation laws and so far it has been a joy to use. The installation wasn't all that hard but I am getting tired of manufacturers who think it is okay to have the installation instructions in small pictures with no words. This only serves to confuse everyone but a small pamphlet would have really helped . Words matter and that is no more evident than when trying to follow these small pictures and not making a whole lot of headway. For the most part, the installation was just me and I fixed the little issues That needed correction. It did not help that I was having a tough time fitting my hands where they need to go but that is not the fault of the faucet but rather poor design of the physical sink. At times it was a bit frustrating but as time progressed everything fell into place and I now have a very nice looking and functioning kitchen sink. Was it worth the DIY adventure? I was getting very frustrated trying to contort my body into a folded up position under the sink but that type of torture is built-in to installing new kitchen faucets. No matter what brand you buy, you are still going to have to contort yourself into impossible positions. This brand uses newer technologies that try to make the installation as simple as possible and it did help. I am glad it is all behind me now and I really do like how this new sink looks and functions.
TroyTali
Comentado en los Estados Unidos el 3 de marzo de 2025
Sometimes we don't get what we pay for...in that sometimes one can get a great product for less. This is a great example. This faucet installed very easily, is very smooth and functions very well. Much better than what we had originally.
Anthony Minier
Comentado en los Estados Unidos el 3 de marzo de 2025
When I moved into my current home, the kitchen sink had a standard 3 hole faucet that had the hot water knob left of the spout and the cold water knob to the right of the spout. It had become obvious in the past few months that that kitchen faucet has seen much better days and the time had come to look for a replacement. It hasn't occurred to me that the hot and cold running water knobslevers can be combined into one hole while the middle hole would still have the faucets spout and the left hold could have a dish or hand soap pump dispenser. To top off all of the modern features, the faucet spout has a removable and adjustable sprayer that is at the end of a 20 inch house. This sink meets or exceeds the latest round of California water conversation laws and so far it has been a joy to use. The installation wasn't all that hard but I am getting tired of manufacturers who think it is okay to have the installation instructions in small pictures with no words. This only serves to confuse everyone but a small pamphlet would have really helped . Words matter and that is no more evident than when trying to follow these small pictures and not making a whole lot of headway. For the most part, the installation was just me and I fixed the little issues That needed correction. It did not help that I was having a tough time fitting my hands where they need to go but that is not the fault of the faucet but rather poor design of the physical sink. At times it was a bit frustrating but as time progressed everything fell into place and I now have a very nice looking and functioning kitchen sink. Was it worth the DIY adventure? I was getting very frustrated trying to contort my body into a folded up position under the sink but that type of torture is built-in to installing new kitchen faucets. No matter what brand you buy, you are still going to have to contort yourself into impossible positions. This brand uses newer technologies that try to make the installation as simple as possible and it did help. I am glad it is all behind me now and I really do like how this new sink looks and functions.
TroyTali
Comentado en los Estados Unidos el 3 de marzo de 2025
Sometimes we don't get what we pay for...in that sometimes one can get a great product for less. This is a great example. This faucet installed very easily, is very smooth and functions very well. Much better than what we had originally.
Anthony Minier
Comentado en los Estados Unidos el 3 de marzo de 2025
When I moved into my current home, the kitchen sink had a standard 3 hole faucet that had the hot water knob left of the spout and the cold water knob to the right of the spout. It had become obvious in the past few months that that kitchen faucet has seen much better days and the time had come to look for a replacement. It hasn't occurred to me that the hot and cold running water knobslevers can be combined into one hole while the middle hole would still have the faucets spout and the left hold could have a dish or hand soap pump dispenser. To top off all of the modern features, the faucet spout has a removable and adjustable sprayer that is at the end of a 20 inch house. This sink meets or exceeds the latest round of California water conversation laws and so far it has been a joy to use. The installation wasn't all that hard but I am getting tired of manufacturers who think it is okay to have the installation instructions in small pictures with no words. This only serves to confuse everyone but a small pamphlet would have really helped . Words matter and that is no more evident than when trying to follow these small pictures and not making a whole lot of headway. For the most part, the installation was just me and I fixed the little issues That needed correction. It did not help that I was having a tough time fitting my hands where they need to go but that is not the fault of the faucet but rather poor design of the physical sink. At times it was a bit frustrating but as time progressed everything fell into place and I now have a very nice looking and functioning kitchen sink. Was it worth the DIY adventure? I was getting very frustrated trying to contort my body into a folded up position under the sink but that type of torture is built-in to installing new kitchen faucets. No matter what brand you buy, you are still going to have to contort yourself into impossible positions. This brand uses newer technologies that try to make the installation as simple as possible and it did help. I am glad it is all behind me now and I really do like how this new sink looks and functions.
TroyTali
Comentado en los Estados Unidos el 3 de marzo de 2025
Sometimes we don't get what we pay for...in that sometimes one can get a great product for less. This is a great example. This faucet installed very easily, is very smooth and functions very well. Much better than what we had originally.
Anthony Minier
Comentado en los Estados Unidos el 3 de marzo de 2025
When I moved into my current home, the kitchen sink had a standard 3 hole faucet that had the hot water knob left of the spout and the cold water knob to the right of the spout. It had become obvious in the past few months that that kitchen faucet has seen much better days and the time had come to look for a replacement. It hasn't occurred to me that the hot and cold running water knobslevers can be combined into one hole while the middle hole would still have the faucets spout and the left hold could have a dish or hand soap pump dispenser. To top off all of the modern features, the faucet spout has a removable and adjustable sprayer that is at the end of a 20 inch house. This sink meets or exceeds the latest round of California water conversation laws and so far it has been a joy to use. The installation wasn't all that hard but I am getting tired of manufacturers who think it is okay to have the installation instructions in small pictures with no words. This only serves to confuse everyone but a small pamphlet would have really helped . Words matter and that is no more evident than when trying to follow these small pictures and not making a whole lot of headway. For the most part, the installation was just me and I fixed the little issues That needed correction. It did not help that I was having a tough time fitting my hands where they need to go but that is not the fault of the faucet but rather poor design of the physical sink. At times it was a bit frustrating but as time progressed everything fell into place and I now have a very nice looking and functioning kitchen sink. Was it worth the DIY adventure? I was getting very frustrated trying to contort my body into a folded up position under the sink but that type of torture is built-in to installing new kitchen faucets. No matter what brand you buy, you are still going to have to contort yourself into impossible positions. This brand uses newer technologies that try to make the installation as simple as possible and it did help. I am glad it is all behind me now and I really do like how this new sink looks and functions.
TroyTali
Comentado en los Estados Unidos el 3 de marzo de 2025
Sometimes we don't get what we pay for...in that sometimes one can get a great product for less. This is a great example. This faucet installed very easily, is very smooth and functions very well. Much better than what we had originally.
Anthony Minier
Comentado en los Estados Unidos el 3 de marzo de 2025
When I moved into my current home, the kitchen sink had a standard 3 hole faucet that had the hot water knob left of the spout and the cold water knob to the right of the spout. It had become obvious in the past few months that that kitchen faucet has seen much better days and the time had come to look for a replacement. It hasn't occurred to me that the hot and cold running water knobslevers can be combined into one hole while the middle hole would still have the faucets spout and the left hold could have a dish or hand soap pump dispenser. To top off all of the modern features, the faucet spout has a removable and adjustable sprayer that is at the end of a 20 inch house. This sink meets or exceeds the latest round of California water conversation laws and so far it has been a joy to use. The installation wasn't all that hard but I am getting tired of manufacturers who think it is okay to have the installation instructions in small pictures with no words. This only serves to confuse everyone but a small pamphlet would have really helped . Words matter and that is no more evident than when trying to follow these small pictures and not making a whole lot of headway. For the most part, the installation was just me and I fixed the little issues That needed correction. It did not help that I was having a tough time fitting my hands where they need to go but that is not the fault of the faucet but rather poor design of the physical sink. At times it was a bit frustrating but as time progressed everything fell into place and I now have a very nice looking and functioning kitchen sink. Was it worth the DIY adventure? I was getting very frustrated trying to contort my body into a folded up position under the sink but that type of torture is built-in to installing new kitchen faucets. No matter what brand you buy, you are still going to have to contort yourself into impossible positions. This brand uses newer technologies that try to make the installation as simple as possible and it did help. I am glad it is all behind me now and I really do like how this new sink looks and functions.
Craig G. Geis
Comentado en los Estados Unidos el 21 de febrero de 2025
The water is pressure is unbelievably powerful. The faucet looks really good. The side sprayer is so much different than the others in that it is better quality. Installation went smoothly. I did use plumber's tape for the threads of each connection. Highly recommend this faucet & sprayer. I installed it on 2/16/2025 and only time will tell how good it is!
Craig G. Geis
Comentado en los Estados Unidos el 21 de febrero de 2025
The water is pressure is unbelievably powerful. The faucet looks really good. The side sprayer is so much different than the others in that it is better quality. Installation went smoothly. I did use plumber's tape for the threads of each connection. Highly recommend this faucet & sprayer. I installed it on 2/16/2025 and only time will tell how good it is!
Craig G. Geis
Comentado en los Estados Unidos el 21 de febrero de 2025
The water is pressure is unbelievably powerful. The faucet looks really good. The side sprayer is so much different than the others in that it is better quality. Installation went smoothly. I did use plumber's tape for the threads of each connection. Highly recommend this faucet & sprayer. I installed it on 2/16/2025 and only time will tell how good it is!
Craig G. Geis
Comentado en los Estados Unidos el 21 de febrero de 2025
The water is pressure is unbelievably powerful. The faucet looks really good. The side sprayer is so much different than the others in that it is better quality. Installation went smoothly. I did use plumber's tape for the threads of each connection. Highly recommend this faucet & sprayer. I installed it on 2/16/2025 and only time will tell how good it is!
Craig G. Geis
Comentado en los Estados Unidos el 21 de febrero de 2025
The water is pressure is unbelievably powerful. The faucet looks really good. The side sprayer is so much different than the others in that it is better quality. Installation went smoothly. I did use plumber's tape for the threads of each connection. Highly recommend this faucet & sprayer. I installed it on 2/16/2025 and only time will tell how good it is!
Craig G. Geis
Comentado en los Estados Unidos el 21 de febrero de 2025
The water is pressure is unbelievably powerful. The faucet looks really good. The side sprayer is so much different than the others in that it is better quality. Installation went smoothly. I did use plumber's tape for the threads of each connection. Highly recommend this faucet & sprayer. I installed it on 2/16/2025 and only time will tell how good it is!
Craig G. Geis
Comentado en los Estados Unidos el 21 de febrero de 2025
The water is pressure is unbelievably powerful. The faucet looks really good. The side sprayer is so much different than the others in that it is better quality. Installation went smoothly. I did use plumber's tape for the threads of each connection. Highly recommend this faucet & sprayer. I installed it on 2/16/2025 and only time will tell how good it is!
Craig G. Geis
Comentado en los Estados Unidos el 21 de febrero de 2025
The water is pressure is unbelievably powerful. The faucet looks really good. The side sprayer is so much different than the others in that it is better quality. Installation went smoothly. I did use plumber's tape for the threads of each connection. Highly recommend this faucet & sprayer. I installed it on 2/16/2025 and only time will tell how good it is!
Christian Kennedy
Comentado en los Estados Unidos el 9 de enero de 2025
Fit my son great
julio c.
Comentado en los Estados Unidos el 6 de enero de 2025
The quality is exelent.fit, the color is good and durable.
Daniel Thielen
Comentado en los Estados Unidos el 3 de abril de 2025
Nice quiality and confortable
Sports woman
Comentado en Canadá el 28 de julio de 2024
Did not suit the setup of my kitchen sink.
Sports woman
Comentado en Canadá el 28 de julio de 2024
Did not suit the setup of my kitchen sink.
Sports woman
Comentado en Canadá el 28 de julio de 2024
Did not suit the setup of my kitchen sink.
Sports woman
Comentado en Canadá el 28 de julio de 2024
Did not suit the setup of my kitchen sink.
Sports woman
Comentado en Canadá el 28 de julio de 2024
Did not suit the setup of my kitchen sink.
Sports woman
Comentado en Canadá el 28 de julio de 2024
Did not suit the setup of my kitchen sink.
Sports woman
Comentado en Canadá el 28 de julio de 2024
Did not suit the setup of my kitchen sink.
Sports woman
Comentado en Canadá el 28 de julio de 2024
Did not suit the setup of my kitchen sink.
Jean-denis richard
Comentado en Canadá el 23 de febrero de 2024
Nice product work good for now!
Jean-denis richard
Comentado en Canadá el 23 de febrero de 2024
Nice product work good for now!
Jean-denis richard
Comentado en Canadá el 23 de febrero de 2024
Nice product work good for now!
Jean-denis richard
Comentado en Canadá el 23 de febrero de 2024
Nice product work good for now!
Jean-denis richard
Comentado en Canadá el 23 de febrero de 2024
Nice product work good for now!
Jean-denis richard
Comentado en Canadá el 23 de febrero de 2024
Nice product work good for now!
Jean-denis richard
Comentado en Canadá el 23 de febrero de 2024
Nice product work good for now!
Jean-denis richard
Comentado en Canadá el 23 de febrero de 2024
Nice product work good for now!
reason goodwin
Comentado en los Estados Unidos el 7 de diciembre de 2024
Good price and my son says they are comfortable
Faviola Rivero
Comentado en los Estados Unidos el 24 de octubre de 2024
No se pudo cargar el contenido.
Productos recomendados
Mex $10,779.49
Mex $ 1,881 .00 Mex $1,881.00
Mex $549.00
Mex $ 279 .00 Mex $279.00
Mex $5,523.46
Mex $ 1,881 .00 Mex $1,881.00
Mex $2,263.59
Mex $ 1,063 .00 Mex $1,063.00