No hay artículos en el carro
No hay artículos en el carroJustin
Comentado en los Estados Unidos el 1 de julio de 2024
No playing with settings. Just turned it on poured in the resin, and boom. Success on the first print. Only ...... Extra thing I did was put a heater in it.
Philip Cousemacker
Comentado en Australia el 21 de diciembre de 2024
The printer is fantastic, however I'm not too impressed with some of the changes made to Photon Workshop
carlos gil
Comentado en México el 13 de agosto de 2023
Gran juguete para los modelistas
Jorge
Comentado en México el 23 de mayo de 2023
Es mi segunda impresora de resina, la anterior era halot one 2k, se nota un poco el cambio de calidad, pero la interface si está pésima comparada con la halot, en muchas cosas prefiero la halot
J.J. Mendoza
Comentado en México el 6 de diciembre de 2023
Bastante conforme, desde la primera impresión quedé sorprendido de la calidad de la pieza impresa
Cliente de
Comentado en México el 5 de abril de 2023
El producto llegó a tiempo y funcionó perfectamente, fácil de utilizar tarda 2 por capa y una impresión de 10 cm de altura la cubre en 8 hrs promedio.Nunca había utilizado una impresora 3d y fue bastante sencillo.
Chris Burks
Comentado en los Estados Unidos el 7 de abril de 2023
Out of the box,4 of 5 rate.Just need to tweak settings on my understanding of using unit.
Luis C.
Comentado en México el 16 de junio de 2022
calidad de impresión excelente, sin problemas de funcionamiento hasta ahora, la recomiendo para todos, desde principiantes hasta con mas experiencia en la impresión 3D
alejandro nava lezama
Comentado en México el 29 de diciembre de 2022
Fácil de usar
Cliente de
Comentado en México el 9 de octubre de 2022
Si bien la impresión 3d requiere experiencia para obtener buenos resultados, el equipo ayuda mucho, es fácil de usar y con instrucciones claras, hasta el momento es la impresora más rápida que he utilizado, me ha funcionado excelente para laboratorio dental.
Camilo Espinosa
Comentado en México el 26 de octubre de 2022
Imprime detalladamente, el software de la impresora es fácil de usar. Estoy muy contento con mi compra.
J. Darknell
Comentado en los Estados Unidos el 3 de junio de 2021
I've been 3D printing for over 5 years and printing with another companies resin printer for the past 18 months. I was spoiled by its ease of use, but it was also expensive to operate so I didn't use it as often as I would have liked. Curiosity finally got the better of me and I picked up this Anycubic Photon Mono just to see what these little LCD printers are really capable of and I can safely say I'm blown away by the print quality. Once you have a process that works, its very easy to use. Just expect a learning curve.When I was waiting for the printer to arrive I submersed myself in all the YouTube videos on the subject that I could find. Turns out this was a good thing AND a bad thing. Based on all this new found "knowledge" and thinking I knew better, I forged my own path for my first print and sadly it was an utter failure. Based on the videos I had watched I started ordering resin trays and FEP film but due to my inexperience, I ordered all the wrong things. Long story short after a comedy of errors and a half dozen failed prints I finally hit upon a winning formula that I've been able to readily duplicate across half a dozen successful prints now.The printer gives you most everything you'll need to start printing right away. Everything except the resin, and depending on the type you get you may also need isopropyl alcohol to clean the print which for some reason is still hard to come by. I bought the Anycubic Craftsman resin and have been super happy with the quality.Some of the things I learned during my first couple weeks----When you have a failed print, make sure to clean out the resin tray otherwise the next print will be adversely affected--Some of the resins are extremely bad smelling, some protection is recommended--You will eventually have to replace the FEP film, however the most popular videos on YouTube show a product and process that is out of date.--There is definitely a learning curve you can only get past by experience. All the video watching in the world can't prepare you for every little hiccup, especially when so many videos contradict those of other channels.So like everything there are pros and cons, so from my perspective, here are mine--PROS--Printer is super easy to use and setup once you know the process--Very inexpensive to operate relative to high end solutions--High quality print results that surpasses expectation--Comparatively fast, prints an entire layer in one go, taking just a couple seconds of exposureCONS--Initial learning curve, you need to understand burn-in layers, exposure times and lift speed and half a dozen other settings, yet none of these options are really clearly explained, nor is it covered how they affect the final result.--It can take a couple hours before you can see if there's anything on the build plate, I wish there was a way to know earlier if a print failed.--There are so many options for resins available, yet there is very little data on what settings you need for a particular printer/resin combo so some educated/guessing will be necessary.All in all, I'm super happy I took the chance on this printer, as I've done so much printing, trying different things now that I would never have considered with my other printer mostly due to speed and cost. I'm sure next I'll be looking to upgrade to its big brother.
Matt Mrozek
Comentado en los Estados Unidos el 19 de abril de 2021
No se pudo cargar el contenido.
Productos recomendados