No hay artículos en el carro
No hay artículos en el carroLa broca de corte de laminado ideal para la producción de gran volumen. Carburo sólido y piloto integral (sin rodamiento para mantener) prolongan la vida útil de la broca, la configuración delgada reduce la vibración. Adecuado para enrutadores y recortadoras, #51200, diámetro (D) 1/4, altura de corte (B) 1/4, vástago (D) 1/4, longitud total (L) 1-1/2, tipo flush, flush 1, 51200 panel de carburo sólido piloto 1/4 de diámetro x 1/4 x 1/4 de 1/4 de pulgada vástago de 1/4 de 1/4 de 1/4 de 1/4 de 1/4 de 1/4 de 1/4 de 1/4 de 1/4 de pulgada de pulgada
Buena durabilidad con melamina
Comentado en México el 25 de abril de 2024
Me gusto la dureza del material
JoelYarlene
Comentado en los Estados Unidos el 14 de octubre de 2021
Good
D. Campbell
Comentado en los Estados Unidos el 26 de febrero de 2020
very good for trimming laminet
M. J. McKenzie
Comentado en los Estados Unidos el 9 de julio de 2018
I used this router bit to trim the edges of laminate as I recovered my laminate countertops. It worked really well for the job. I had to stop occasionally and clean it off (it gathered some paint from the old countertop and glue from the new one), but it made clean cuts and cut right along the edges. This was my first routing experience, and it did leave a little scratch along the sides of the countertop as I trimmed the top. ( Very possibly user error.) I waxed over the scratch and it disappeared. Then I waxed the rest of the sides before routing the top, and it worked perfectly.
Kindle Customer
Comentado en Canadá el 19 de julio de 2018
Works well. As advertised
Solidoak
Comentado en los Estados Unidos el 22 de abril de 2013
I have used this bit now to do a large island countertop. I glued the laminate on with 1/2" overlap on all sides and then ran this bit over it done an excellent job of flush trimming the edge. I then hit the edge lightly with a pad sander and I was ready to apply the beveled edging that I purchased to match. The edges were almost flawless just needed some light sanding to remove the knife edge of the finishing edging that I applied. A real time saver!Steve
Productos recomendados
Mex $110.90
Mex $ 58 .00 Mex $58.00
Mex $14,299.00
Mex $ 1,881 .00 Mex $1,881.00