No hay artículos en el carro
No hay artículos en el carroSaturación Gold Glaze es un esmalte opaco de alto fuego. Se utiliza para lograr auténticos efectos de fuego de reducción en su horno eléctrico. Glaze se puede utilizar solo o en capas con otros materiales para crear un aspecto único. Para obtener los mejores resultados, aplicar sobre Cone 04 bisque.
jessica
Comentado en los Estados Unidos el 11 de enero de 2025
I read all the comments here before buying, so I know it was a gamble. But I’ve really been wanting to try getting a gold accent on the rims of a few cylinder I slab built.I started out with test tiles of 3, 4, 5, and 6 layers. All remained the dark brown color that others have mentioned, with a slight luster under bright light. Disappointing, but not surprising given the reviews. I also realized I applied layers way too thin.So I tried the rims and applied THICK layers. Unfortunately, this meant that the wet glaze dripped in some places. It’s very dark when applying, so very messy trying to wipe it back without smearing everywhere. I even tried dipping layers on the cylinders (and holding them upside down for several minutes so they wouldn’t run). In total, I brushed on probably 5 layers and dipped 2-3 additional layers (I lost count at some point).I also had a small (~4 in wide) bowl that I was happy to use as a tester. I applied ~6 THICK layers brushed on.All were fired at Cone 6.On the cylinders, where the glaze was brushed on (thicker band) remained very dark brown-black while the dipped band got a little lighter, still a dark brown with a little luster.On the bowl, the color came out a dark copper (think old penny, not new penny) with satin/ matte finish. Similar to the other review where they posted a photo of the inside of a mug.My takeaways:- Apply 5-6 THICK layers- Works better on a larger area- Have realistic expectations. Look at other photos online that show various thickness of application and layering.- Know that the picture here on Amazon, which is the picture from the label, is NOT what you’re likely to get after firing. That said, if you’re looking for a satin matte dark copper, this one is great!
Temi
Comentado en los Estados Unidos el 20 de noviembre de 2024
Me gustó mucho este color, es opaco como bronce
Le
Comentado en Singapur el 15 de julio de 2023
Great color n shines.
Rebeccah Polk
Comentado en los Estados Unidos el 27 de mayo de 2023
Beautiful glaze! Pro tip: make sure you are at least putting 4-5 layers of this glaze! I had done 3ishhh and it wasn’t enough, the gold needs to be applied thickly in order to go gold.***Might work in ^10 reduction- I’ve only ran one test and it wasn’t thick enough BUT it appeared to be breaking gold in some texture! Will test again and update review
Colin Glover
Comentado en Canadá el 11 de abril de 2020
No matter how I try I cannot get it to turn to any kind of gold resembling color. Fired at the correct cone on bisque, it just turns out gritty black. Very disappointing. I have researched and see that I am not the only one with this problem. I have tried mixing it with other glazes, does not work either. just a frustrating product.
Productos recomendados
Mex $295.00
Mex $ 147 .00 Mex $147.00
Mex $2,033.88
Mex $ 894 .00 Mex $894.00