No hay artículos en el carro
No hay artículos en el carroGOTYER6
Comentado en los Estados Unidos el 9 de febrero de 2025
Says they'll work as an 1157 bulb but didn't.
Ronald R.
Comentado en los Estados Unidos el 1 de abril de 2025
Not very good; has no voltage/current regulation; if the supply voltage drops, the brightness of these bulbs drops too.
Yannick
Comentado en Canadá el 9 de diciembre de 2024
The parking light consumes 75mA, while the brake light consumes 230mA. When both are powered at the same time, it is still 230mA.Please note that these bulbs are polarity sensitive. The base has to be on the ground side, else they will not light up.I removed a star because the light intensity difference between the parking light and the brake light is not as easy to distinguish as with standard incandescent bulbs. It may cause drivers behind you to not easily see that you have applied the brakes.
Cornelius
Comentado en los Estados Unidos el 14 de noviembre de 2024
I finally got a chance to install these in our RV and I'm very happy with them, they're much brighter than the incandescent bulbs they Replaced and Unlike some led light bulbs they don't seem to generate any RFI that I could detect.With that said these don't have any type of clear enclosure over the LED boards which means there is exposed solder joints which is perfectly acceptable in an RV application but probably not something you'd want to have on in your vehicles tail lights as they're not moisture proof let alone waterproof.Definitely giving these five stars for indoor RV applications, much easier to use these to replace legacy incandescent bulbs rather than trying to replace the entire fixture.
Christopher Dutchak
Comentado en Canadá el 30 de octubre de 2024
I chose this twelve-pack of 2357 bulbs for general use around the shop, particularly for upgrading trailer and motorcycle lights to LED. The price is right but I have to caution buyers due to the nature of the build of these bulbs.The bulbs are built without any sort of enclosure and have exposed soldering and circuit boards. This not only makes them very susceptible to moisture, causing shorts, but also makes them quite fragile. The first install of these bulbs was into an old early-80s motorcycle taillight whose bulb sockets had a little rust, requiring a little extra force to install the bulbs. The twisting force of my hands on the bulbs snapped the LED boards on the first two bulbs that I attempted to install (see photos). I should note that this same amount of force didn't affect incandescent or a different style of LED that I ultimately decided to use instead.A further caution is that I was not able to get these bulbs to light up for brake light purposes. They only had one brightness level that did not respond to brake application. This may be due to incompatibility with my very old motorcycle's wiring system but I'm suspicious if the bulbs even work properly.All in all, if you're in need of several of these bulbs for RV interiors or the like, these are probably a decent value but they're not going anywhere near any of the exterior lights of my vehicles. I don't trust them whatsoever.
Productos recomendados
Mex $1,850.65
Mex $ 777 .00 Mex $777.00
Mex $244.00
Mex $ 129 .00 Mex $129.00