Carro de la compra

No hay artículos en el carro

No hay artículos en el carro

Allen Company Titan SlideGuide - Trineo para Ballesta, Color Negro

Envío gratis en pedidos superiores a Mex $600.00

Mex $578.02

Mex $ 312 .00 Mex $312.00

En stock
  • de forma rápida y segura la mayoría de los tipos de ballesta
  • Diseñado para ballestas estándar con anchos de riel entre 1-3/8 pulgadas y 1-9/16 pulgadas
  • Clasificado para arcos de hasta 185 libras
  • No apto para ballestas de extremidades inversas como el Horton Vision 175
  • Los muelles de deslizamiento libre se deslizan a lo largo de la mayoría de anchos de riel;Diseño compacto que se almacena en el bolsillo fácilmente;Desliza los rieles de ballesta como si estuviera en el aire



Más información del producto

imagen
imagen

imagen

imagen

imagen

imagen

imagen

Raúl Salvador Ríos Martínez
Comentado en los Estados Unidos el 19 de junio de 2024
Más o menos to del todo bien pero trabaga
Customer
Comentado en los Estados Unidos el 29 de diciembre de 2023
Slide became lodged between rail and crossbow cable under the scope. It would not release. It made the bow inoperable until I cut the sled free. Normally Allen’s has decent products, but this one isn’t for Wickedridge products.
Customer
Comentado en los Estados Unidos el 24 de diciembre de 2023
Unhappy that it couldn't be used at all.
Shoppers
Comentado en los Estados Unidos el 11 de octubre de 2023
I really liked the idea of this sled. That’s where it ended. It’s loud, really loud! It will scream at you while cocking your bow. Not good for hunting. The sled itself slides to deep into the firing mechanism. Very hard to release it from the string. Do not recommend for any Bear brand x-bows.
Tsgt Tom
Comentado en los Estados Unidos el 7 de septiembre de 2022
This cocking sled is decently made, but it doesn't work on the Bear X Intense crossbow. It will attach fine, but it will not pass under the cocking mechanism. The sled allowed the draw string to catch on the anti dry fire bar, but wouldn't go any further. I had to remove the sled while the drawstring was stuck on the ADF bar(unsafe), modify the sled and reinstall it to get the draw string fully cocked to fire. I then had to forcefully remove the sled from the drawstring due the way it was designed. I don't normally like to modify parts for my crossbows, but I couldn't leave the crossbow partially drawn.
Productos recomendados

Mex $284.03

Mex $ 144 .00 Mex $144.00

5.0
Elegir

Mex $503.35

Mex $ 226 .00 Mex $226.00

4.3
Elegir

Mex $411.20

Mex $ 205 .00 Mex $205.00

4.4
Elegir