No hay artículos en el carro
No hay artículos en el carroDescripción del producto
Lámpara de techo LED Airand de 18 W con diseño moderno, sin necesidad de bombillas adicionales, será más brillante que la bombilla incandescente radicional y ahorrará un 85% en facturas de electricidad, aire y montaje empotrado LED de techo Fixturecan se puede utilizar ampliamente en exteriores e interiores, pasillo, dormitorio, sala de estar, comedor, baño, cocina, garaje, sótano, oficina, almacén, etc.
Fácil instalación
Características del accesorio de luz de montaje empotrado
ECONÓMICA
Lámpara de techo moderna: 120 chips LED integrados sin parpadeo, brillo uniforme, no necesita bombillas incandescentes. Fácil de instalar la iluminación de techo LED en varios pasos.
Ahorro energético
Lámpara de techo superbrillante: Ahorro de energía de hasta un 85% sobre la vida útil de nuestro producto al reemplazar las bombillas incandescentes de 150 W por esta unidad de 18 W
Resistente al agua
Lámpara de techo impermeable: Con una clasificación IP44, la lámpara de cocina puede funcionar bastante bien en tu baño o en cualquier lugar con salpicaduras de agua.
Contenido del paquete:
● 1 x 18W luz de techo LED blanca brillante
● 1 material de montaje (incluyendo dos tornillos, dos tornillos de expansión)
Iluminación de seguridad
Sin flash, sin deslumbramiento y sin radiación, más saludable para tus ojos.
Especificaciones:
● Tamaño: 24 x 24 x 4,8 cm
● Potencia: 18 W
● Cantidad de chips LED: 120 Piezas
Temperatura del color: 5000 K (blanco frío)
CRI: 80Ra ● Factor de potencia: >0,95
● Flujo luminoso: 1650 lúmenes
● Temperatura de trabajo: -20 ° ~ 45 ° C
Lámpara de techo ultrafina
Lámpara de techo para sala de estar
Lámpara de techo para dormitorio
Lámpara de techo para pasillo
Darryl
Comentado en los Estados Unidos el 9 de enero de 2025
Easy to install and they produce great light!
John Wooding
Comentado en los Estados Unidos el 4 de diciembre de 2024
Seems to fit the bill well. I needed light occasionally in a dark area in my shed with open rafters. I didn't want to go through the hassle of framing, installing a box, wire and switch,(maybe later). Installed light on 1 foot square piece of plywood in rafters, used the quick connector to connect to an old vacuum cleaner cord and ran it to an outlet. Plug In, On Plug out off. (I actually used one of those I might need it things!!) An added benefit as an LED there is great light, instant on and no flickering in the cold. I have installed similar motion activated lights in closets with great results
Jeffrey
Comentado en los Estados Unidos el 1 de noviembre de 2024
Extremely easy to install, any amateur can do it. Just unplug 2 wires from the old lamp and insert them into the tab locking wire case provided with the unit and its done! I had a short at the case of the physical switch on the wall, so after i fixed that this light is a very nice upgrade. Much brighter than expected. Cant go wrong
Gene
Comentado en los Estados Unidos el 15 de julio de 2023
I used this fixture to replace an existing bare 150 watt equivalent LED light bulb at the bottom of my basement steps to reduce the "glare." The opaque lens covering and low silhouette did exactly that, very bright light, but not in your face. In addition, this flush mount ceiling light was very easy to install and connect to the existing electrical box. The connecting wires are only 18 gauge, but that is not a problem since the current needed to power the LEDs is so low (~0.15 amps). Best of all, the price is very reasonable for such an efficient and bright light compared to similar light fixtures at the big box stores.
An
Comentado en México el 4 de julio de 2022
Bonita. Facil de instalar. Por el precio esperaba mucho mas. No ilumina lo suficiente . Empezo a fallar a las 3 semanas.
MaryHS
Comentado en los Estados Unidos el 25 de octubre de 2019
UPDATE: This burned out within 3 months, I'm changing my review to 1 star. My original review is below.ORIGINAL REVIEW (pointless for a product that died so quickly) I really liked this light, but first a quick warning - it has no screw terminals for wiring, only push-connectors. If you have stranded wire, you'll need to tin the end or crimp on a post. It's fast and easy with great results but don't get surprised. I have stranded wire and tinned the ends with my soldering iron in a minute or two and it worked beautifully.This is a great light packing clean, bright, glare free light into a compact package with an installation method that's versatile and efficient. A metal bracket on the back of the light releases with a recessed spring clip so you screw the bracket to the wall/ceiling and then just clip the light to it. It attaches firmly and securely with no wiggle but can be removed if you ever need to (like for painting).I also liked how compact this is, it's small enough to fit inside my 16" circular fluorescent fixture so when the ballast wore out I removed the ballast and bulb and installed this inside. The fixture still matches the others in my house but now it's LED for more light with less electricity and no mercury filled glass bulbs!I'm very happy with the 2 I bought and will buy more against the day when my other circular florescent lights start to go. UPDATE: No, I won't, this burned out so fast I will chose a different brand!
Productos recomendados
Mex $929.97
Mex $ 418 .00 Mex $418.00