No hay artículos en el carro
No hay artículos en el carroEl paquete incluye: 1 manguera adaptador de repuesto de cilindro de CO2 (manguera de 60 pulgadas), 4 juntas, 1 manual de usuario. Especificaciones: Material de la manguera: hule, Longitud de la manguera: 36 pulgadas/60 pulgadas, rosca para tanque grande de CO2: CGA320 G5/8-14/W21.8-14//DIN477, instrucciones: 1. Coloca la junta en el conector, confirma que la válvula de entrada y la válvula de liberación están cerradas, girando el interruptor de pasador del adaptador de cilindro pequeño a la parte superior. 2. Conecta el tanque de CO2. 3. Conecta el cilindro pequeño. 4. Gira el interruptor del pasador del adaptador a la parte inferior para abrir completamente la válvula del cilindro. 5. Abre la válvula de entrada (la primera válvula del tanque grande, no el volante del tanque grande). 6. Abre muy lentamente el volante de tu tanque grande escuchando un pequeño silbido, cuando el silbido se detiene, abre un poco más hasta que esté todo el camino abierto, espera unos 30-60 segundos hasta que no escuches flujos de gas, el llenado se puede completar. 7. Una vez completado el relleno, detenga el CO2 girando el volante. 8. Aísla para el cilindro de la máquina de soda girando el interruptor de pin hacia la parte superior. 9. Suelta el gas residual abriendo la válvula de escape. 10. Retira el cilindro pequeño. 11. Repite el proceso de recarga para cada cilindro.
C
Comentado en los Estados Unidos el 4 de octubre de 2024
There is only one problem with this, and it's not even really a problem if you are smart enough to count to 3. It will bleed off over time. They all do that. It does it very, very slowly, but it does do it. How do you fix this? It's an extremely complicated fix involving closing the valve on the cylinder and, well, that's it. If you've ever used shielding gas when welding, it's exactly the same as that. When you're done welding, you close the valve. The only reason I know this bleeds off is because there's not as much in the hose itself after a while if there's some left after filling. If you left the valve open and then went on vacation or something, it would probably drain a good portion of the tank. Just...close...the...valve.This is very easy to install. You just screw it in on both sides. I attached it to a Drinkmate and a 20 pound cannister of Co2. Everything is working great. I only mess with the valve on the cannister itself. What I do is open it, wait until the hose is full (easy to hear the hissing), hit the valve on the Drinkmate for a second or so, then close the valve on the cannister. Then I drain the hose by hitting the valve (or button or whatever you want to call it) on the Drinkmate. Sometimes, I time it right and that's enough. Other times, I have to kind of play the valve on the cannister a bit to get just a bit of Co2 out of it. It's easy. I only do that so I don't leave the hose full of gas.
Woodsman
Comentado en los Estados Unidos el 23 de octubre de 2024
I should have paid more attention to the fittings on the end for compatibility. I needed the tr21 but this comes with identical ends that go on a my commercial co2 bottle. I had hoped that the kit had different attachments for versatility, but it doesn't. I was not able to try this out with my soda stream.
Productos recomendados
Mex $269.54
Mex $ 145 .00 Mex $145.00
Mex $266.35
Mex $ 133 .00 Mex $133.00
Mex $1,158.03
Mex $ 579 .00 Mex $579.00
Mex $292.00
Mex $ 137 .00 Mex $137.00