Carro de la compra

No hay artículos en el carro

No hay artículos en el carro

Acouto Interruptor de Control del Manillar de la Motocicleta 7/8' Lado Izquierdo y Derecho Manillar Bocina Intermitentes Encendido y Apagado de faros Interruptor de Arranque Eléctrico 1 Par

Envío gratis en pedidos superiores a Mex $600.00

Mex $130.00

Mex $ 66 .00 Mex $66.00

En stock

Acerca de este artículo

  • Lado izquierdo y derecho ---- Interruptor de manillar de 7/8 "para motocicleta nuevo y de (lado izquierdo y lado derecho). Conexión de cables: 10 pines del lado izquierdo, 8 pines del lado derecho
  • Manillar universal de 22 mm de 7/8 '' ---- Este interruptor de encendido y apagado del manillar de motocicleta se ajusta al interruptor universal para manillares de 7/8 "de diámetro. Funciona con cualquier eléctrico de 12 V
  • Interruptor multifuncional del manillar ---- Función de encendido / apagado del manillar de la motocicleta integrada con interruptor de parada del motor, interruptor de arranque eléctrico, interruptor de peligro, interruptor de encendido / apagado de los faros, interruptor de cambio de luz de señal de , bocina, interruptor bajo / interruptor, interruptor PASS
  • Resistente al agua ---- El interruptor de control del manillar de la motocicleta está hecho de material de PVC y ABS de , duradero en uso, resistente al agua y a la intemperie garantizado
  • Compatibilidad fuerte ---- para referencia: apto para , Suzuki, , , Ducati, Aprilia, Vespa, Kymco, Piaagio, Agusta, motocicletas / Scooters / Dirt Bikes / Quad / Cuatrimotos / Banshee / Polaris (para todos con manillares de 7/8 ")



Descripción del producto

Interruptor universal de control de luz de señal de giro para manillar de motocicleta de 7/8 pulgadas

Especificaciones:

Material: PVC, ABS. Color: NegroVoltaje: Manillar DCFit de 12 V de 2,2 cm (lado izquierdo y derecho). Conexión de cable: 10 pines del lado izquierdo, 8 pines del lado derecho. Longitud del cable: Tamaño aproximado: 53 cm. Diseño universal

El paquete incluye:

1 par de interruptores de manillar de motocicleta de 2,2 cm (lado izquierdo y derecho)

Interruptor universal de control de luz de señal de giro para manillar de motocicleta de 7/8 pulgadas

Interruptor universal de control de luz de señal de giro para manillar de motocicleta de 7/8 pulgadas

Interruptor universal de control de luz de señal de giro para manillar de motocicleta de 7/8 pulgadas


Dafne
Comentado en México el 31 de agosto de 2023
La conexión vienen al revés bueno en la moto q las quise instalar quedaban alreves los conectores el derecho que daba en el izquierdo los conectores
timothy
Comentado en los Estados Unidos el 22 de agosto de 2022
Part was for a different year
Knockout
Comentado en los Estados Unidos el 6 de junio de 2022
So I am started installing the product and I did it one end at a time. I started with the left side and the plug matched no problem and that one was very simple very easy. But there is a problem with it more on that in a minute. Then I started installing the right side in the plug was not the correct fit for mine I figured as much because mine did it have multiple headlight options on the old one anyways. The right one seems a little loose and I'm pretty sure I have the screws as tight as they could go before they start stripping. As I pulled my throttle it wants to pull all of the housing for the switch down. Once I got everything wired up and good to go I tried starting the bike and checking out some of the switches. I first tried to just use my turn signals and see if they worked. Started with the left one I look back at my turn signals and the right one was flickering. I thought okay I'll just use it backwards no big deal. And then I tried using the right turn signal and for some reason it tried to start the bike. I don't know how that could happen like I said I did it one at a time and the plug match the plug I didn't have to do any stripping or crimping. Once that happened I haven't been able to get my bike on since I don't know what it fried but it did fry something. Just be very careful and do it at your own risk
Axel garcia
Comentado en los Estados Unidos el 28 de abril de 2022
Super good
munro smith
Comentado en los Estados Unidos el 26 de agosto de 2021
The Switches were quality switches, but the harness on the switches were 4inches shorter than the Original! The Right Switch was only designed for the Pull Throttle Cable, and could have been designed for the Push/Pull Trottle System by having the second hole to accommodate the Push cable, and Simply putting a plug in it for just the Pull System! I drilled and tapped the second hole and the throttle worked perfectly! I couldn't fit it without major harness alterations!
Bruce H
Comentado en los Estados Unidos el 21 de julio de 2021
I used this product with my own custom made wiring harness on my 1973 Norton Commando Production Racer. I wanted a control set with a useful layout and compact design. This is a "value" set of controls and may not be as robust as a much more expensive set but these controls meet my needs perfectly.Download or "screen shot" the wiring diagram for the controls from the sales listing and keep a copy for installation, this will give you the codes for wire colors/connections for each control function.
Productos recomendados

Mex $59.99

Mex $ 31 .00 Mex $31.00

4.6
Elegir