Carro de la compra

No hay artículos en el carro

No hay artículos en el carro

70334 Bolsa de filtro colector de polvo para montaje en pared, bolsa de 1 micra con cierre de polvo para POWERTEC DC5371/5372 y Grizzly, Shop Fox, Rockler Delta, Wen

Envío gratis en pedidos superiores a Mex $600.00

Mex $468.77

Mex $ 220 .00 Mex $220.00

En stock

Acerca de este artículo

  • Modelo compatible: la bolsa colectora de polvo 70334 para colectores de polvo de montaje en pared funciona con aspiradoras/máquinas con entrada de 5 a 6 pulgadas, perfectamente compatible con POWERTEC DC5371/5372 y Grizzly, Shop Fox, Rockler Delta, Wen
  • Bolsa de filtro de 1 micra: esta bolsa de recogida de polvo para Powertec se puede utilizar para controlar y atrapar hasta el 99% de las partículas finas de polvo creadas cuando se utiliza lijado, sierra de mesa y otros equipos de carpintería
  • Diseño transparente: la bolsa colectora de polvo está diseñada con una ventana transparente, lo que te permite ver el aserrín y los desechos y puedes saber fácilmente cuándo vaciar la bolsa. Se ha añadido una cierre sellada a la parte inferior de la bolsa que hace que se vacíe fácilmente
  • Alta calidad: fabricado con un material de fieltro de poliéster ultra grueso que puede soportar aplicaciones de calor seco, junto con el desgaste diario
  • Detalles del tamaño: la bolsa de recogida de polvo 70334 es de 14 pulgadas de diámetro y 24 pulgadas de largo con un cuello de 5-1/2 pulgadas de diámetro x 4 pulgadas de largo (medido en condiciones infladas)



Descripción del producto

bolsas colectoras de polvo

bolsa de recogida de polvo

Alta calidad

Fabricado con un material de fieltro de poliéster ultra grueso que es capaz de soportar aplicaciones de calor seco, junto con el desgaste diario.

bolsas colectoras de polvo para powertec

Diseño transparente

La bolsa de recogida de polvo está diseñada con una ventana transparente, lo que te permite ver el aserrín y los desechos y no hay más adivinaciones sobre cuándo vaciar la bolsa.

bolsa de recogida de polvo para powertec

Fácil de vaciar

Se ha añadido una cierre sellada a la parte inferior de la bolsa colectora de polvo para que se vacíe fácilmente.


sigmund
Comentado en Canadá el 24 de junio de 2024
I bought this bag because the zipper on my Wen bag broke. The zipper in the photos of this item make it look like a large, strong zipper. It is actually a very small nylon zipper that doesn't look like it will hold up to much weight in the bag at all. It's actually smaller then the Wen original. Also, the fabric is very thin and flimsy.If I didn't have immediate need for the dust bag, I would have definitely returned it.
SavvyBuyer
Comentado en los Estados Unidos el 19 de junio de 2024
I have to admit this dust collector bag has more to offer than the name brand version. As you can see in the comparison photos (both filled with air) they are about the same size. The name brand is spec'd out at 13-1/2"x24" and the PureSturdy is 14”x 24”, in diameter and length. But here's where they differ.The PureSturdy bag has a see-through strip which gives you a view inside the bag to detect the level of debris. This is a real benefit with a minor risk associated. The clear strip is sewn into the bag so I am concerned that over time it will either crack and make the bag useless or it will develop leaks around the stitching. For now everything is good.The other enhancement is not visible but underneath, at the bottom of the bag, is a zipper. This conveniently allows unloading the bag into a different container without removing it from the wall-mount. One caveat, the wall mount must be installed high enough to allow for a bin or trash can to slip under the bag to catch the debris when unzipped.There was one shortcoming that is not readily noticed; as you can see on the name brand bag, it is attached to the exhaust port with a metal spring loaded clamp. No clamp, other than the string as seen in the photo, was included. Now, in all fairness, and obviously, one would use the name brand clamp in addition to the string. Or, any 4-6" band clamp for that matter.As for filtration, you need a particle counter to provide a fact based opinion...which I don't have. What I can offer is that when I vacuumed up a pile of sanding dust, I did not get a cloud of the same blowing through and out of the bag. Just for comparison, the name brand was rated at 30 micron, whereas the PureSturdy one has a 1 micron rating. That is significant; looking at the weave of the fabric, I can see a finer knit but is it 1 micron tight? I can't say; it just didn't make a cloud.As for the cost, well, at the same price point as the name brand, and given the added features and the superior filtration rating, this one is a winner.
GJS
Comentado en los Estados Unidos el 30 de diciembre de 2024
It is very thin thus long-term life is not likely. It is a fraction of the weight of a nominal pillow case of similar size. Pathetic and a waste of time. It was returned., Unused and unopened. It might work as an add-on to a heavier bag filter, but this is not indicated in the description.
Scott
Comentado en los Estados Unidos el 8 de septiembre de 2024
Great replacement bag. It works great with my pieced together vacuum/dust collector system. The bag seems to be a fairly standard size and will fit several collector brands. I'm happy with the way it's working so far, and I can breathe easy in the wood shop.
Tony Wagon
Comentado en Canadá el 20 de septiembre de 2024
Looks good, quality good, no problems
Productos recomendados

Mex $145.00

Mex $ 79 .00 Mex $79.00

4.9
Elegir

Mex $764.20

Mex $ 359 .00 Mex $359.00

4.4
Elegir

Mex $369.00

Mex $ 184 .00 Mex $184.00

4.4
Elegir