No hay artículos en el carro
No hay artículos en el carroDescripción del producto
¿Cómo instalar?
El paquete incluye:
20 conectores de 3 pines sin huecos
Ideal para crear una extensión
4 conectores RGB en forma de L
Ideal para superar esquinas
4 conectores RGB en forma de T
Ideal para una conexión de 3 vías
Te ilumina y te da calor
linchamps
Comentado en Francia el 29 de agosto de 2024
Merci pour la livraison express
Xavi
Comentado en España el 25 de mayo de 2024
Son faciles de conectar y se instalan muy bien
david
Comentado en el Reino Unido el 4 de octubre de 2024
Exactly as described
Ricarda König
Comentado en Alemania el 1 de enero de 2023
Wir haben eine LED leiste von Givee. Bei den Steckern sind plus und Minus außen und das Ersungskabel innen. Bei govee sind diese nebeneinander und das Erdungskabel außen. Wenn man schaut wie die Kabel in der LED Verlegt sind und diese in die richtige Reihenfolge setzt funktioniert jede LED mit diesen Steckern.
SUTHNR
Comentado en los Estados Unidos el 2 de mayo de 2022
just recently finished up my latest PC build and got a set of LED light strips (Amazon ASIN B08GSCJPMD) for accents inside the case. The LED strips were longer than I needed, and I wanted a cleaner install than 12 inches of loose wire at the junctions for that kit. So I got THIS kit of ARGB 3-pin couplers.The short story: These work! I got my LED strips mount around the inside of the window in my case. I recommend using a powered ARGB hub.The long story: Your motherboard probably doesn't put out enough power to properly run a LOT of LED lights off of a single ARGB plug. I ran into a problem when installing my LED light kit and using this couplers kit. The further along I got, the less the LED's worked properly (I did have a 24-cable motherboard extension kit as well). But the LEDs were doing weird things... They would not light up the correct pattern the AURA software was sending, and the LED strips pretty much wouldn't work after the 2nd junction with these couplers. It's as if they weren't getting enough power. And after a couple hours of trying to make it work using different coupler pieces, trying to modify them thinking it was bad connections (based on some other reviews here), I finally came to the conclusion that they just weren't pulling enough power through the motherboard 3-pin ARGB plug - and I have a brand new ASUS Hero VIII mobo! I finally decided to get a powered ARGB hub (Amazon ASIN B08T1SM5CW) as those draw power straight from the power supply and the only control signal from the motherboard. BINGO! Now with the LED strips and LED mobo cable plugged into the hub and powered by the power supply, all the lights worked perfectly as they should! And all the junctions I used this coupler kit for worked great!Overall these worked great for me. I suspect that others that have issues may be running into a POWER issue, not a connectivity issue. I did make sure the click the white covers down very tightly so they stayed closed. These get a recommendation from me.
Productos recomendados
Mex $119.00
Mex $ 66 .00 Mex $66.00
Mex $749.00
Mex $ 337 .00 Mex $337.00
Mex $381.67
Mex $ 179 .00 Mex $179.00