Carro de la compra

No hay artículos en el carro

No hay artículos en el carro

27341 - Kit de reparación de protector de skeg Guard para Mercury & Mariner 2003-2023 40 50 60 HP 2 y 4 tiempos, para Johnson Evinrude 40 50 HP 1999-2003 - Protección de inclinación interna de 40 50

Envío gratis en pedidos superiores a Mex $600.00

Mex $1,976.75

Mex $ 889 .00 Mex $889.00

En stock

Acerca de este artículo

  • Aplicación: este protector de skeg interior 27341 se adapta a Mercury 40, 60 HP 2 y 4 tiempos 2003-presente, apto para 50 HP 2 tiempos 2006-2014 y 50 HP 4 tiempos 2016-presente, y para 55 HP 2003-2003. 1 1 1Y la reparación de skeg también es compatible con Mariner 40, 50, 60 HP 2 y 4 tiempos 2003-2011, para Evinrude/Johnson 40, 50 hp 4 tiempos 1999-2003.
  • Función: Repara o reemplaza el skeg de tu barco para proteger el apoyo con el protector SkegShield para motores Mercury/Mariner y Evinrude/Johnson. El borde inferior reforzado ayuda a garantizar la protección contra daños. Viene con agujeros de drenaje para evitar causar corrosión y proteger el medio ambiente marino.
  • Material: este protector de skeg está hecho de acero inoxidable 316 de grado marino, resistente y duradero, tratado con antioxidación y anticorrosión. El autodrenante viene con tornillos de bloqueo de acero inoxidable macho y hembra.
  • Instalación: fácil de instalar, autodrenable y viene con tornillos de bloqueo de acero inoxidable macho y hembra. Reemplaza un skeg dañado en menos de 10 minutos, ahorra tiempo y dinero.
  • Garantía de satisfacción: 100% garantía de satisfacción. No dudes en ponerte en contacto con nosotros si tienes alguna pregunta sobre nuestro producto.


El protector de skeg interior se adapta a Mercury 40, 60 HP 2 & 4 Stroke 2003-Present, apto para 50 HP 2 Stroke 2006-2014 y 50 HP 4 Stroke 2016-Present, y para 55 HP 2003-2011. Y la reparación de skeg también es compatible con Mariner 40, 50, 60 HP 2 y 4 tiempos 2003-2011, para Evinrude/Johnson 40, 50 hp 4 tiempos 1999-2003.


Orly Berg
Comentado en los Estados Unidos el 11 de febrero de 2025
I used this to repair my skag, which had damageEasy enough to install and it improved performanceOnly downside, it covers the drain plugMakes for more work when doing maintenance
greg johnson
Comentado en los Estados Unidos el 12 de enero de 2025
Tip broke off skeg on 93 Johnson 40hp. This repaired it nicely.
Mike Houston
Comentado en los Estados Unidos el 2 de junio de 2024
It couldn't be any easier to put this sleeve over a broken skeg. Excellent quality
buysalot
Comentado en los Estados Unidos el 4 de mayo de 2024
This is a cheap piece. The steel isn't very thick and bends some. Came with one side dented in. It was cheap and I made it work. The 2 predrilled holes were nice but my original skeg was broken were the hole was. Ended up drilling a new hole. The screws that came with it were to long and would bottom out before getting tight against my old skeg and this one. Ended up cutting them shorter and making due. I have a 2008 Mercury 60hp 4 stroke if that helps. I was able to make this work but wasn't the best option.
shane keene
Comentado en los Estados Unidos el 18 de agosto de 2023
Installing the guard isn’t for the faint of heart. Mine required a large deadblow mallet to drive it on fully. Once it’s on, the holes were easy to drill and assembly is a breeze. Instructions were great
Productos recomendados

Mex $1,030.10

Mex $ 484 .00 Mex $484.00

4.9
Elegir

Mex $326.40

Mex $ 156 .00 Mex $156.00

4.5
Elegir