No hay artículos en el carro
No hay artículos en el carroJaime Antonio.
Comentado en México el 5 de agosto de 2023
Este producto cumple con lo s estándares de calidad.Para mí fue una excelente compra.
salvador higuitl
Comentado en México el 22 de mayo de 2023
Excelente Herramienta, buena calidad y precio
Vladimir Belomestnov
Comentado en Canadá el 31 de julio de 2022
This one broke after one use. It would not release the bit and when I applied too much force - fell apart. Apparently the plastic tightening grip is connected to a plastic part that drives internals, the plastic is very weak and once the jaws locked (which is not supposed to happen anyways) - there is no way to open the chuck without breaking it.Also, the 1/4" hex tail has a non-standard groove, I had to modify it to fit the receiver end of the drill.Useless, junk, stay away.
Customer
Comentado en Canadá el 23 de junio de 2022
when drilling .the keyless chuck not hold the drill bit .I have to keep tight again .
kermit
Comentado en Canadá el 11 de mayo de 2022
Out of the box (so to speak) this chuck was VERY stiff; almost impossible to use. A few squirts of silicon spray lube made a world of difference. But, it will never have the smooth action of a DeWalt or Makita chuck. It's now usable, but that's about it. And, no, I would not buy it again.
Jach Smith
Comentado en México el 18 de noviembre de 2022
Bien
Daniel Manzanares
Comentado en México el 24 de octubre de 2022
Sólo se usó un extractor de tornillos y se quebró en el primer uso.
Javier
Comentado en México el 6 de septiembre de 2022
Para adaptarlo a un atornillados Dewalt, inalambrico
Mcgyvr
Comentado en Canadá el 29 de junio de 2021
Ordered two and both broke first use, many messages but never received any replacements.
Rafael
Comentado en México el 28 de octubre de 2021
Tenía la punta más larga de lo que el taladro aceptaba (es probable que en otros mercados sea más largo la normativaSolo corte con un esmeril unos milímetros y encajo bien!!
Richard A.
Comentado en Canadá el 5 de enero de 2021
I needed something in a more compact package to fit in the space I had to work in, So by using my small impact driver with this chuck and adapter, I was able to get my project completed without tearing off my knuckles.
Sergio Ochoa
Comentado en México el 29 de septiembre de 2021
El broquero y el adaptador se ven de calidad media, el adaptador es delgado para el tamaño del broquero
Jose L.
Comentado en México el 30 de diciembre de 2020
Me sirvió muy bien
Productos recomendados