No hay artículos en el carro
No hay artículos en el carro2 soportes para bandeja de disco duro de 2.5 a 3.5 pulgadas para adaptador de soporte de montaje de metal PCI SSD HDD, sugerencias de instalación: 1. Instalación a intervalos. Estante superior, no afectado por la placa base, compatible con chasis con placa base en la parte inferior. 2. Colocación horizontal: debido a que está fijo con un solo tornillo, puede resolver eficazmente el problema de la fuerza pesada en el disco duro. 3. Colocación vertical: coloca la parte inferior de la placa base y fíjala con cojín de EVA.
Wolf
Comentado en Australia el 17 de agosto de 2024
The Mounts will bend and sag because they are not welded in both corners to prevent Bending and sagging once an IDE HDD has been Installed best application for these is an SSD only as any HDD IDE is too heavy for them to support yet they are advertised as being good to Mount both IDD HDD's and SSD HDD's.
Shpp
Comentado en Alemania el 17 de agosto de 2024
Sehr stabil und man kann gleichzeitig eine 2.5" und eine 3.5" Festplatte an eine Halterung anbringen.Leider war eine verbogen angekommen. Eigentlich aufgrund der Stabilität überraschend, Versand in einer gepolsterten Tasche scheinbar dennoch nicht ausreichend.Rückversand und Gutschrift problemlos abgewickelt.
Spberg
Comentado en los Estados Unidos el 14 de agosto de 2024
Good price - Easy to Install - Works Fine. I bought this to install a 3.5 inch HDD into a Dell Inspiron. The Inspiron didn't have docking spots for 3.5 inch. This was a cheap and effective way to mount my HDD. Very happy with ease of installation. Screws to mount HDD came with the holders. Can use for 2.5 inch drives as well, although Inspiron has two locations for mounting 2.5 inch drives.
rosaliepryce
Comentado en los Estados Unidos el 15 de noviembre de 2024
The product works as intended take note that the Brackets aren’t the most sturdy so make sure you don’t place any important drives DIRECTLY under your GPU BEING THERE IS NO HEATSINK FOR THE HDD
aznfl
Comentado en los Estados Unidos el 29 de octubre de 2024
I didn't even know that an item like this existed before I came across it while browsing for a mounting adapter that could hold two ssds or 1 ssd and 1 hdd. This product was a great find as it met the additional disk mounting needs that I had with my current server case. While it worked well for me, I knocked it down a star due to some caveats that a potential buyer of it should be aware of prior to purchasing it.One, if your case is similar to mine and you mount this adapter to the slot nearest to the side of the case, there won't be enough room to mount a hard drive. Two, if you mount the adapter next to each other without an empty slot between them, there won't be enough space to mount a hard drive. If you leave a one slot gap, there is room. Please see the photos that I uploaded with this review.Three, the edges on these would benefit from either filing them down a bit or taking a deburring tool to them. Four, due to the way they are mounted to an expansion card slot using a single screw and no card slot to connect to below. There is some side to side movement, which is to be expected.If you are aware of the above caveats and are ok with them, these mounting adapters will likely meet your needs.
Productos recomendados
Mex $9,867.81
Mex $ 1,881 .00 Mex $1,881.00
Mex $2,365.36
Mex $ 993 .00 Mex $993.00
Mex $2,483.53
Mex $ 1,192 .00 Mex $1,192.00
Mex $801.80
Mex $ 384 .00 Mex $384.00
Mex $6,210.29
Mex $ 1,881 .00 Mex $1,881.00
Mex $1,083.86
Mex $ 498 .00 Mex $498.00