Carro de la compra

No hay artículos en el carro

No hay artículos en el carro

1A 4.2V 3.7V 18650 LiPo Li-ion Cargador de Batería de Litio MPPT Módulo Controlador de Carga Solar Módulo de Carga Solar de Batería de Litio(without Pin)

Envío gratis en pedidos superiores a Mex $600.00

Mex $129.00

Mex $ 64 .00 Mex $64.00

En stock
  • 【AUTOMATIC ADJUSTMENT】The battery charger module automatically adjusts the charging current according to the output capacity of the input power supply , when the input power supply voltage is removed , it automatically adjusts to a low power sleep mode
  • 【REDUCE HEAT RELEASE】The solar for charge controller module has a pre for charge adjustment function , which is used to restore the deeply discharged battery in the initial stage of charging and minimize heat dissipation
  • 【IMPROVE THE CHARGING RATE】The lithium battery solar charging module has a constant current/constant voltage for operation with thermal regulation function , which can maximize the charging rate without the risk of overheating
  • 【APPLICATION】The adaptive unit on the module can automatically adjust the charging current according to the output capacity of the input power supply , so SD05CRMA is very suitable for solar power systems or applications that need to for charge lithium ion batteries or lithium polymer batteries
  • 【USE PARAMETERS】Solar panel dedicated charging module charging module power supply voltage DC 4 . 4 6V , charging output voltage DC 4 . 2V , the maximum charging current / output current is 1A , but you can change the current by changing the value of R1


Feature :

1 . Lithium battery charger for solar powered system .
2 . Power supply voltage DC 4 . 4 6V , charging output voltage DC 4 . 2V .
3 . Maximum charging current/output current is 1A , but you can change the current by changing the value of the R1 resistor .
4 . Automatically adjust the charging current according to the output capacity of the input power supply .
5 . Precharge adjustment for restoring deep discharge batteries and minimize heat dissipation at the initial charging stage .


Specification :

Item Type : Lithium Battery Solar Module
LED Indicator : ''CR'' LED is status indicator; ''OK'' LED is fully charged OR constant voltage mode
Dimension : 18x10 . 16x2 . 7mm
Options : with Pin , without Pin
Weight : 0 . 9g(with Pin) , 0 . 6g(without Pin)
Instruction :
The adaptive unit on the module can adjust charging current automatically based on the output capability of input power supply , so it is ideal for the solar powered systems , or the applications that need to lithium ion battery or lithium polymer battery with an input power supply whose output capability is limited .
If your solar panel is 5V , then you can use it directly . Of course , the module can also be powered by a 5V DC power supply .

. w e text table td , . w e text table th , ; . w e text table ,


Package List :

1 x Solar Module

Productos recomendados