Carro de la compra

No hay artículos en el carro

No hay artículos en el carro

10.525GHz Doppler Effect Microwave Motion Sensor Compatible with Raspberry Pi and Arduino Board. for Vehicle Speed Measurement, Automatic Doors, Sensor Lights, Reversing Radar, etc.

Envío gratis en pedidos superiores a Mex $600.00

Mex $479.99

Mex $ 263 .00 Mex $263.00

En stock

1.Nombredelestilo:5



Acerca de este artículo

  • Non-contact detection; Adapts to harsh environments without affecting by temperature, humidity, noise, airflow, dust, light, etc.
  • Powerful anti-RF interference capability; Low output power, no harm to human body; Long detection distance.
  • Can detects of non-living objects; The microwave moves at the speed of light with great directionality; Compatible with Raspberry Pi and Arduino Board.
  • Used in industrial, transportation and civil applications such as measuring vehicle speed, liquid levels, automatic door motion detection, automatic washing, production line material detection and car reversing sensors etc.
  • Wiki: http://www.cqrobot.wiki/index.php/Microwave_Sensor


The microwave motion sensor is a microwave moving object detector which is designed according to the principle of Doppler Radar. It is widely used not only in the detection of human body, but also many other objects. With the character of long detection distance and high sensitivity, it works without the limitation of ambient temperature and has come widely used in industrial, transportation and civil applications such as measuring vehicle speed, liquid levels, automatic door motion detection, automatic washing, production line material detection and car reversing sensors etc.
Wiki: http://www.cqrobot.wiki/index.php/Microwave_Sensor

SPECIFICATION

- Working Pressure : 3.3V/5V Plus/Minus 0.25V
- Working Current (CW): 60mA max., 37mA typical
- Dimension: 63mm * 48mm
- Mounting hole size: 3.0mm
Emission Parameter
- Detection Range: 2m to 16m continuously adjustable (min: 2m, max: 16m)
- Emission Frequency: 10.525 GHz
- Frequency Accuracy: 3MHz
- Output Rate (Min): 13dBm EIRP
- Harmonic Emission: Less Than -10dBm
- Average Current (5% DC): 2mA typ.
- Pulse Width (Min): 5uSec
- Load Cycle (Min): 1%
Receiver Parameter
- Sensitivity(10dB S/N ratio) 3Hz-80Hz Broadband: -86dBm; 3Hz-80Hz Bandwidth Clutter: 10uV.
- Antenna Gain: 8dBi
- Vertical Level: 3dB Beam-width: 36 degrees
- Horizontal Level: 3dB Beam-width: 72 degrees
Wire Specifications
- Cable Specifications: 22AWG
- Material: Silicone
- Withstand Voltage: Less Than 50V
- Withstand Current: Less Than 1000MA
- Length: 21cm
- Line Sequence: Red-Power Supply Positive, Black-Power Supply Negative, Green-Control Board Signal Terminal.

DISTRIBUTION LIST

1 * Microwave Motion Sensor
1 * JST 3-Pin Cable


STEVE E
Comentado en el Reino Unido el 14 de marzo de 2025
The device has two large, easy to use, mounting holes.
Helmut
Comentado en Alemania el 10 de abril de 2025
Gut verpackt angekommen und funktioniert einwandfrei.
Customer
Comentado en Canadá el 11 de julio de 2024
Going to use for house protection.
Jan Verleysen
Revisado en Bélgica el 12 de agosto de 2023
Werkt boven de verwachting . Kan onzichtbaar opgesteld worden .
InspecteurGadget
Comentado en Francia el 27 de agosto de 2020
J’adore les composants CQRobot. Ils sont innovants, faciles à utiliser.Ce radar fonctionne à merveille pour détecter une présence au travers d’une porte par exemple. il se branche avec 3 fils au niveau de l’arduino, comme un détecteur infrarouge. Sauf que celui là est plus précis et permet de détecter les mouvements au travers des objets / mursL’emballage du kit est super soigné avec emballage antistatique et boite en plastique pour éviter au module d’être écrasé pendant le transport.A acheter les yeux fermés, c’est de la très bonne qualité.
Productos recomendados

Mex $369.00

Mex $ 169 .00 Mex $169.00

4.5
Elegir

Mex $1,496.52

Mex $ 598 .00 Mex $598.00

4.6
Elegir

Mex $95.00

Mex $ 54 .00 Mex $54.00

4.6
Elegir