No hay artículos en el carro
No hay artículos en el carro
Características:
El soporte transparente puede ser un buen regalo para los fanáticos de los dibujos animados, sorprenderlos, mostrar tu apoyo a sus pasatiempos y mejorar tu relación.
Estos soportes transparentes para cifras de acción están hechos de materiales plásticos, estrechamente conectados, resistentes y fáciles de montar y reemplazar, más adecuados para mostrar tus cifras de acción.
Especificaciones:
Material: plástico.
Color: como se muestra en la imagen.
Tamaño: aproximadamente 33 mm.
El paquete incluye:
100 bases para cifras de acción.
Notas:
Debido a la medición manual, puede haber ligeras diferencias en el tamaño.
El color puede variar ligeramente debido a las diferentes pantallas.
Joshua Nichols
Comentado en los Estados Unidos el 3 de marzo de 2025
pegs too small for 90s 6 inch figures MMPR and TMNT!!!
Matt & Roxanne
Comentado en los Estados Unidos el 18 de marzo de 2025
Fits great for figures
Gregory Vettorino
Comentado en los Estados Unidos el 30 de diciembre de 2024
Bought these to use on my GI Joe Classified collection since some of them have accessories (Spirit for example) that can throw off the balance when standing. I found these for 100 pieces at around $22 and thought for the price point it was worth a shot.The narrow rectangle base doesn't leave much room for some of the larger figures like Nemesis Immortal, and the nubs are short and seem more suitable for the classic 3 3/4 line that the bigger 6 inch.Overall you get what you pay for and if you are looking for a cost effective product that ships fast due to Amazon Prime then these are worth a try.
Randy C. Fisher
Comentado en los Estados Unidos el 5 de noviembre de 2024
These are literally a waste of money. They are only about the size of a quarter and the problem is not only are they thick so they make the figure off balance because one leg is about 2 cm higher than the other but they also don't like to stick in the holes very good or they stick in the hole too good and you can't get them out. Since they are so small they don't offer enough balance for figures I've tried them on Playmates, Neca, Marvel Legends and other figures and they simply do not work. they're too small and too thick and unbalanced the figure.
G.
Comentado en los Estados Unidos el 12 de noviembre de 2024
Any avid action figure collector knows which of their figures can't stand on their own or is most likely to take a dive off of a display. There are plenty of ways to rectify that, from bulky stands, putty, or trying to strategically place them leaning on sturdier figures. These feet stands are another great option. They are a small disc shape about the size of a quarter with a single peg so you can place one in each foot to help with dynamic poses instead of the wide stands that have 2 pegs and force you to keep your figures standing at attention. The pegs easily fit standard circular peg holes. Some figures have hex peg holes so it takes a little force or heat to get them in some of those figures but they do hold great once in. I've tried them with Marvel Legends, GIJoe Classified, Star Wars Black Series, Mezco, McFarlane's DC figures, Power Rangers Lightning Collection, a few NECA, and they have all worked great. Out of the nearly 2 dozen figures I've tried them on I have had only two figures where the peg holes were a bit too large so I used a bit of putty to stick them on and after that they worked fine.I love that you can use these small circular feet stands to help figures stay in fairly dynamic poses. Many wider stands have 2 pegs at a set distance and require a straight pose. These stands are just small circles under the figure's feet so you'd still need a proper flight stand that grips the figure if you're trying to do anything that defies gravity but these small feet stands definitely give figures a bit of support for better balanced posing. They're particularly handy for figures with small or thin feet (female Marvel Legends, Black Series) that have trouble standing on their own.
Productos recomendados