Carro de la compra

No hay artículos en el carro

No hay artículos en el carro

10 puntas de soldadura de repuesto ET para WE1010 WE1010NA WES51 WES50 WESD51 PES51 PES50 LR21 LR20 Punta de soldadura

Envío gratis en pedidos superiores a Mex $600.00

Mex $538.81

Mex $ 290 .00 Mex $290.00

En stock

Acerca de este artículo

  • ETS ETL ETKN ETT ETX ETR ETA ETB ETC ETD ET Punta de soldadura de repuesto Punta de soldadura Punta de mango Punta de soldadura Punta de lápiz
  • Destornillador cónico redondo con forma de cuchillo de cincel doblado que ayuda a soldar en diferentes proyectos
  • No importa la electrónica de precisión, sino también para soldadura de arrastre chips DIP Punta estrecha para algunos pequeños trabajos LED y cableado de placa Raspberry Pi Zero Projects
  • Estaciones compatibles WE1010 WE1010NA WES51 WES50 WESD51 WESD50 WCC100 WTL-1000S-0
  • Hierros compatibles PES51 PES50 LR21 EC-1000 ET2000 EC1201A 1204A WCC101 EC1201 120


10 puntas de soldadura de repuesto para WE1010 WE1010NA WES51 WES50 WESD51 WESD50 WCC100 WTL-1000S-0 PES51 PES50 LR20 EC-1000 ET2000 EC1201A 1204. WCC100 WCC1 punta de hierro de soldadura EC1201 1202, ETS/L/KN/T/X/R/A/B/C/D (recuperación de temperatura rápida y mantiene estable la temperatura. Hay diferentes formas (incluyendo 1 punta cónica doblada, 4 puntas de destornillador, 1 punta de destornillador larga, 1 destornillador estrecho, 1 cartera, 1 cono largo, 1 punta de cuchillo, total 10 piezas) especialmente una punta doblada para soldar por arrastre en diferentes proyectos. No importa la electrónica de precisión, sino también la soldadura de grag, chips DIP, punta estrecha para algunos trabajos pequeños, cableado LED y tablero, proyectos Raspberry Pi cero. Aceptaremos devolver y reembolsar el pago completo cuando no cumplas con los consejos. Haremos todo lo posible para resolver todas tus preguntas


DanTre
Comentado en México el 15 de agosto de 2023
Las puntas son de muy buena calidad y ajustan perfectamente en mi cautin Weller WES51, las puntas que he probado no he tenido ningun problema.
Jakob
Comentado en los Estados Unidos el 29 de junio de 2023
It might sound silly, but you can tell these are nice just from the package. Each tip comes in a very thick plastic bag and everything is packaged into nicely folded foam and in another thick bag. The care it takes to package something like this let’s me know it’s a quality product. Each tip was factory tinned extremely well and the couple I tried heat up well and do the job. It’s really nice to get this abundance of good tips! Definitely recommend.
vhvv
Comentado en México el 24 de febrero de 2023
Precio bajo, idéntico a las puntas originales
Marcelo V.
Comentado en México el 22 de noviembre de 2023
Las puntas son de buena calidad y el precio es bastante accesible, pero las puntas se atoran en el cautín, no salen a la primera y las puntas puntiagudas tener cuidado porque se pueden doblar al querer sacar.
Sergio Francolugo Mercado
Comentado en México el 30 de octubre de 2022
Muy buen surtido de piezas. Excelente calidad del material con el que están fabricadas. Muy precisa la medida. El recubrimiento de las puntas de muy buena calidad . La adherencia con la soldadura sin plomo muy pareja. Totalmente recomendables.
CloverLeaf
Comentado en los Estados Unidos el 24 de agosto de 2020
First impressions were good. I measured them with calipers and compared them to the Weller product and they were within .005". (The Weller products varied .003" from each other). Then to tinning them, and they all accepted solder easily and evenly, without any voids. (Remember to tin any tip at the lowest temperature possible to prevent oxidation of the tip material before the solder gets to flow on it.) The heat regulation seemed good as well (I believe the heat sensor relies on the magnetic properties of the tip changing with the temperature of the tip.) All in all, it's nice to have such a wide variety of tips, since I work on anything from surface mount chips with the pins on .025" centers to hand wired 1930's tube radios. As for longevity, time will tell, but they come from a country where there is a LOT of hand soldering going on, so the need for quality soldering tips is very high. Hopefully these are part of that supply.
Builder Bob
Comentado en los Estados Unidos el 22 de octubre de 2020
I needed to get some ET Series tips for my Weller WESD51 soldering station. I mainly need the knife, conical, and bent conical tips. I decided to give this 10-piece kit a try. I tried out the 4.6mm knife tip (ETKN), the 0.2mm bent conical tip (ETX), ad the 0.4mm conical tip (ETS). These tips fit in the soldering iron perfectly. They work very well. I can't tell the difference in term of performance between these tips and the standard 1.6mm chisel tip (ETA) which came with my soldering station. The tip profiles are exactly what I'm looking for. I can't speak for the long term durability of the tips since I haven't used them for long (hence the 4 out of 5 stars). I will provide an update to the review in a year from now. In the meantime, these seem to be up to the task.
Tony
Comentado en los Estados Unidos el 21 de febrero de 2019
I was working on a small electronics project and the tip on my WES51 was pretty worn so I went looking for new ones. I found these for a great price and decided to try them out. When they arrived I immediately swapped in the small angled tip since it allowed me to get it into a small area. It worked perfectly and allowed me to fix the project I was working on. I know the other tips have their uses so when I have something else to work on I can pick one that will suit it best.
fil
Comentado en los Estados Unidos el 26 de enero de 2017
The product showed on time. It has: 10 different tips packaged in separate bags, 2 free sample tips and a cleaning sponge. There are 6 different chisel tips ranging from 1,2 mm to 4.8 mm, 2 conical tips, a knife and a bevel tip. Over all quality is as good as the original Weller product and fits my WCC 100 perfectly and they keep temperature well. I wish there were few different bevel tips since I don't need 6 different chisels. Still an excellent product for the price, I will definitely get another set once I ware-out 1.6 mm chisel.
Productos recomendados

Mex $885.11

Mex $ 460 .00 Mex $460.00

4.3
Elegir