No hay artículos en el carro
No hay artículos en el carroEn aluminio de la madera [Aplicaciones] Peel, nuevo, procesamiento de plásticos, pennki. [función/función] no se satura. Y utilizar el dinero Corte Hojas de sierra, madera, PC, Aluminio, Latón, este uno está disponible. RID satura en hoja de sierra. [Especificaciones] ● Longitud de archivo: 250 mm. – Con un mango de madera.
Heikki Rodén
Comentado en Suecia el 20 de marzo de 2024
Som rasp (både grov och fin) är den otrolig! Tiden får utvisa hur länge den levererar….
Jordan Marceau
Comentado en Canadá el 12 de marzo de 2024
I've seen this type of rasp around on the internet for a while, and always wanted to try one but could never get myself to bite the bullet.So of course I finally did, and this thing is everything I hoped to be and more. It flexes a little bit if you put too much pressure on it, but the way this tool works you don't need that much pressure.There's a very coarse side, and a finer side. For those of you who don't know what it is it's basically a bunch of Hacksaw blades that have been bent and riveted together. I'm well it seems like a super simple concept, it's actually one of the most helpful tools I've purchased in years.Even the Rough Side leaves a pretty nice finish, it removes material from some of the toughest woods I've worked with pretty easily, and even though it's flat, if you use the right technique you can actually work on inner curves too.There's no flex if you pushing down on the face where the teeth are, but if you push sideways on it it will start to flex a bit. I can't say it'll break if you push it too hard, but you're not really supposed to use it that way anyways.At the end it's a really good tool and if you've been looking to try one, I definitely suggest this one.Also a pro tip, wear gloves because this will shred your fingers like no tomorrow if you use your hand to support it.
Mr. R Longhorn
Revisado en Bélgica el 27 de octubre de 2024
Do not know how I got along without this in all my years of woodworking. I use it almost daily now and have retired most of my 'normal' wood rasps.
Julien
Comentado en Francia el 8 de septiembre de 2024
Cette râpe est top ! Elle m'a permis de travailler des bois relativement durs (aulne, érable) tout en ne s'usant pas très vite.Elle est très efficace, avec peu d'énergie et de temps, on enlève efficacement beaucoup de matière.Il y'a deux coté sur la râpe : une avec de grosses dents pour aller vite et une avec des dents plus fine pour un travail plus précis.Aucun regret pour cet achat qui m'aidera grandement dans mes travaux du bois.
GZ woodworkers
Comentado en México el 10 de abril de 2024
Esta lima es una verdadera belleza! es mas que lima una herramienta para talla de madera que la puedes usar en modo controlado y preciso (lado fino) o rapida y eficiente (modo medio o coarse). Recomendada para todo aquel que trabaja maderas duras (suaves por supuesto incluidas) haciendo talla, escultura o carpinteria general.
TN
Comentado en los Estados Unidos el 18 de septiembre de 2023
I can't say enough good things about this tool! These are practically famous among hand tool woodworkers. The concept is simple, the price is cheap, and it is darn effective. One of the best recent tool innovations in a field where most tools can be traced back 300 years. Paul Sellers approved! Buy this! :)It is nothing more than a set of bent and riveted hacksaw blades, and they chew through wood like a super-file, but also have a wider cutting surface than any file I have and leave a finer surface than most rasps. You can hit it aggressively then go soft and end up with a quite nice finish considering it's a wood eater.It won't be totally smooth, but it can be sanded or worked with other tools from there. If you just hit with 50 or 80 grit sandpaper instead to eat up the wood, you may not want to finish with a tool you carefully sharpened, but this has no grit to leave in the wood, so you can go from this to a spokeshave or plane without worry.They are not like a surform tool--it is much better, and bigger than many you will find. The surform has little cutting blades like a cheese grater. This is more like a file, with many small raking teeth. It will cut more effectively.It cannot be sharpened and the blades can't be replaced with regular hacksaw blades unless you are a derious DIYer, so theoretically this has a limited lifespan unlike a spokeshave, but it will do many tasks a spokeshave won't excel at, like milling down end grain. They are cheap enough you won't dry when it eventually does wear out. Note that unlike the cheap hacksaw blades I use, these teeth have not been quick to break off and it is wearing well after a couple years of use. Great Japanese innovation--anybody who does hand tool woodworking can use this (gift idea for the person who has every tool already).
David
Comentado en México el 19 de abril de 2019
Hace muchos años vi recomendado usar varias seguetas unidas como substituto de una escofina, pero el ancho estaba limitado por lo delgado de las seguetas. Esto seria una variante que por su distribucion de los dientes cubre mayor area, es muy eficiente y rebaja la madera sin esfuerzo.
Productos recomendados
Mex $889.27
Mex $ 462 .00 Mex $462.00
Mex $404.00
Mex $ 218 .00 Mex $218.00
Mex $1,643.34
Mex $ 788 .00 Mex $788.00