No hay artículos en el carro
No hay artículos en el carroDescripción del producto
El mismo tamaño y pinout que Nano V3.0
Microcontrolador: Atmel Atmega328P-AU
Arquitectura: AVR
Memoria flash: 32 KB de los cuales 2 KB utilizados por el gestor de arranque
SRAM: 2 KB; EEPROM: 1 KB; Velocidad de reloj: 16 MHz;
Chip de conversión USB a serie: CH340C
8 entradas de E/S analógicas: A0 ~ A7 (cada una de las cuales proporciona 10 bits de resolución)
14 pines de E/S digitales: TX, RX, D2 ~ D13.
1 pares de puertos de transceptor serie de nivel TTL RX / TX.
6 Salida PWM: D3, D5, D6, D9, D10, D11.
Corriente CC por pines de E/S: 40 mA (pines de E/S)
Microcontrolador
ATmega328P: microcontrolador de la familia AVR de 8 bits.
El chip CH340 en el Nano solo se alimenta si la placa se alimenta a través de USB.
El ATmega328 tiene 32 KB (también con 2 KB utilizados para el cargador de arranque). El ATmega328 tiene 2 KB de SRAM y 1 KB de EEPROM.
Fuerza
El OSOYOO Nano se puede alimentar a través de la conexión USB-C, una fuente de alimentación externa no regulada de 6-12 V o una fuente de alimentación externa regulada de 5 V. La fuente de alimentación se selecciona automáticamente a la fuente de mayor voltaje.
Voltaje de entrada: 7-12 V; Consumo de energía: 19mA
Fácil de usar: con cable USB-C, cable USB-C a USB-A incluido y cable USB-C a USB-C, puerto tipo C para alimentación, programación y depuración.
Entrada y salida
Cada uno de los 14 pines digitales del Nano se puede utilizar como entrada o salida mediante las funciones pinMode(), digitalWrite() y digitalRead(). Algunos pines tienen funciones especializadas:
Serie: 0 (RX) y 1 (TX). Se utiliza para recibir (RX) y transmitir (TX) datos en serie TTL. Estos pines están conectados a los pines correspondientes del chip USB CH340C.
El paquete incluye
El paquete incluye: 3 placas OSOYOO Nano y 1 cable USB-C.
o 1 placa OSOYOO Nano y 1 cable USB-C
Tamaño de placa de circuito impreso: 18 x 43 mm
Peso: 8g
Matt
Comentado en el Reino Unido el 25 de julio de 2024
I'd had some bad experiences with Arduino's from another site, so thought I'd give this one a try.Works perfect, Arduino IDE found it on Mac with no issues and no drivers or anything needed before uploading the sketch.
Monte
Comentado en los Estados Unidos el 29 de mayo de 2023
Excellent! Exactly what I needed with my prototype build for my invention! There’s absolutely so many different things you can build with this! From ultrasonic sensor robots to weather data detection! Check out instructsbles, Ytube, or mechatronics for ideas or help - even tons of pre written code out there! or It’s basically an Arduino uno board with male pins and no Dc power (usbC powers it instead unless added your own Dc jack/supply - Works great with a breadboard for testing my code and was able to test and set up this one right away as it is already ready to be programmed and coded! - Perfect clone and fast data transfer to its flashbank - Hands down would get more! 10/10 a win!
Wombat37
Comentado en los Estados Unidos el 17 de marzo de 2023
This is the second MCU board I’ve ordered that was made by Osoyoo. The first was based around a LGT8F328P processor and I was very pleased with the quality and the performance of that. This board purports to be compatible with an Arduino Nano V3.The product arrived nicely packaged in an attractive cardboard box with the board inside wrapped in an antistatic plastic pouch. The board had been positioned sideways in the box which helped stop it moving around in transit and, importantly, help prevent it from being crushed. A 0.5m USB-A to USB-C cable was also supplied. This board has a USB-C socket which is preferable to the USB Mini-B sockets used on most other Nano boards. The header pins are already soldered onto the board – which is a great bonus for users who don’t like or don’t want to solder these things on or don’t have a soldering iron.The board components and their layout are almost identical to the official Arduino Nano and most of its clones. The big difference is the inclusion of a small IC labeled “6627” (see photo). It’s not clear what this does but it seems to be something to do with power management or VREF for the ADC.In use, it worked perfectly. I installed it in a pressure and temperature logging monitor I had develeoped using a standard Nano for use with beer kegs. This circuit utilizes most of the capabilities of an Arduino Nano – I2C, SPI, OneWire, analog in, SD read/write, EEPROM and interrupts. This board from Osoyoo worked well. The only issue I had was with the green power LED on the board – it was intense and hurt my eyes!Note that no instructions are provided with the product. However, there is a huge amount of information on the internet for a standard Nano device and they should all apply to this one, too.This is a high-quality device and is sold a lot cheaper than the official Nano board but is more expensive than a lot of other clones – however it does come ready-soldered and with a connecting cable. I could find no issues with its operation or performance (apart from a very intense power LED).
CAROLINA
Comentado en México el 1 de febrero de 2023
Excelente
BigYellowLab
Comentado en los Estados Unidos el 30 de noviembre de 2023
I installed the Arduino IDE v2.2.1, which is the most current version as I'm writing this. Plugged in the Nano, selected the USB serial port and Nano as device type. It worked instantly with the simple LED blink script from the Arduino Examples. This is an amazing little device, and a great way to get into both programming and electronics.
Martínez
Comentado en México el 3 de noviembre de 2023
Excelente plancha, fue un regalo para mi madre y quedó encantada con ella
TS
Comentado en los Estados Unidos el 12 de septiembre de 2023
Get the power of Arduino Uno in a smaller package and at much lower cost. No soldering required - came with header pins installed. My kit came with a USB-C cable which I needed! This clone seems to be a precise match to the official Nano version for all the things I tested.I was able to get it to work within a few minutes. Had to update my IDE 2.2.1 to include the Nano board and my sketch compiled and loaded immediately! I wrote a quick sketch to turn an LED on and off. Then followed up with a sketch to control a motor driver. Worked flawlessly.To update the IDE I did the following steps - IDE 2.2.1->Tools->Boards->Board Manager->Panel appears on Left -> Type Nano then select Arduino MegaAVR Boards (includes Nano) and Click INSTALL. I got version 1.8.8. Then starting creating your scripts.Great experience overall. My suggestion to the seller would be to also offer a lower priced pack of 3 without USB-C cable. Buyers can pick with or without cable and save $s if no cable needed.
Yolanda Garcia
Comentado en México el 6 de junio de 2020
Funciona a la perfección, no derrama agua, calienta muy bien, la cantidad de vapor es buena y notable
Luz alejandra villarreal
Comentado en México el 8 de noviembre de 2020
Excelente plancha
Martha Toledo
Comentado en México el 11 de noviembre de 2020
Buena compra
javier
Comentado en México el 9 de enero de 2019
excelente
HappyNana
Comentado en los Estados Unidos el 7 de mayo de 2016
I love everything about this iron! Over the past 40+ years, I have owned dozens of irons in this price range, and this is the first one that has not had leakage issues. Yay! I recently bought some 100% cotton lined floor-length curtains, and I had to lay them out on the floor to iron them. My previous iron leaked with almost every stroke, even when the reservoir was only half full. But I was able to iron every inch of these 84 X 96 curtains without a single drop of water dripping on them. The iron is larger than others I have used, so that also made the whole process easier. The results were beautiful. I'm so happy - and impressed!I love the retractable cord and the auto-shutoff feature. It has a generous water reservoir, heats up quickly, has sufficient heat, and glides smoothly across the fabric. I didn't have the best of luck with the vertical steam feature. I tried to remove some wrinkles from a fabric shower curtain, some sheer curtains, a silk dress, and 100% cotton floor-length curtains, and I saw no noticeable difference after several shots of steam. In all fairness, I have never used any vertical steamer, even a dedicated one, so I have nothing to compare it to. Although I was hoping for better results with the vertical steam, it's not a deal breaker for me because all the other features are so wonderful. All in all, I love this iron and look forward to many years of use.
Martha R
Comentado en los Estados Unidos el 17 de octubre de 2015
This is THE BEST iron on the market. Just threw my Rowenta over the railing of my deck. Enough of the leaking and spitting and going cold and using a ton of water for little steam. This iron is simple - love the retractable cord - fill it with water - turn it on - cotton IS cotton setting - how refreshing - steams just right without having to use a burst of steam. Just bought a T-Fal 2 days ago, and that is going back to the store as that too spit and leaked. This iron from Sunbeam is what an old lady like me considers to be an iron - one that does the job easily and properly. My husbands shirts at last look good. Do not be discouraged about the weight - that is one of the reasons it irons so well - you can't get a good press with a lightweight iron. So glad I read all the good reviews. The nice thing is that this iron DOES NOT spit and leak. I also like the fact that it does not shut off for 15 minutes. Gives me time to hang the garment and get to the closet. Sometimes simple is just the best - and this is the best.
Customer
Comentado en los Estados Unidos el 31 de agosto de 2013
After 15 year of owning ohe Rowenta iron, with only one repair, it bit the dust. Assuming I would buy another Rowenta I was surprised to see all of the reviews mentioning that the quality had really gone downhill. I bought this iron after reading all the reviews, but was a bit doubtful given it's low price in comparison to Rowenta. This iron was also the one available for pressing in an advanced sewing class I used and the instructor recommended this iron. I have used it now for about 30 hours of ironing time and can state that this iron is better than my old Rowenta. The only difficult thing is to see how much water is in the tank as the blue plastic is not as easy to see through as clear plastic. TIt is important not to overfill it as that just causes water to run out onto the board, but that is what overfilling causes in any steam iron. The steam tank lasts much longer than the Rowenta, and it's blast of steam works wonders on heavily wrinkled linen, heavy denim and cotton. It is not too heavy, and glides easily. It's fantastic for sewing, the blast of steam instantly presses seams without leaving them wet. I have also ironed silk chiffon and charmeuse (with pressing cloth), silk tweed, rayon challis, nylon - all perfect using the heat settings the instructions recommend. The retracting cord is great for storage, though I'd be careful to retract is carefully as is the case with all retractable cords similar to one in a vacuum cleaner. If you like to iron and need a strong performing iron, this is the one for you.
J. Clark
Comentado en los Estados Unidos el 18 de agosto de 2013
My old iron was starting to drip an alarming amount of water, and I decided that it was time for a new one. I wanted to get an iron with a powerful steaming tool so that I could also use the it for blocking my knitting.Bottom line: this iron does have a GREAT steaming feature, and it doesn't leak even a little bit of water (exception: the first time I used it, but ever since I haven't had a single problem). It gets nice and hot and has a dial temperature setting that gives fiber suggestions. It has some nice weight to it so you can really get wrinkles out while you are ironing.The picture does not, however, do the size of this iron justice. It is very large - which helps give it the weight I mentioned earlier. The tip does taper to a nice point, so there shouldn't be any trouble ironing in between button holes despite its size.So far I'm still complete satisfied, will update if it unexpectedly breaks.
Tartan Lass
Comentado en los Estados Unidos el 1 de septiembre de 2013
Recently, I had the good fortune of choosing the Sunbeam GCSBSP-201 Turbo Steam Master Professional Iron. Just goes to show how one can benefit from reading the product reviews here at Amazon. Over the past several years I have owned four brand new so-called "top of the line" steam irons ... and have thrown them all away in disgust! Each one dripped and/or sputtered water, even when the temperature controls indicated that the irons should function flawlessly. I would carefully review the operator's manuals and faithfully follow all the instructions, but still there would be a mess and my sewing projects ended up marked with water spots. GRRRRRR!!!Enter this FABULOUS Sunbeam steam iron, which does everything exactly as promised. Not a single sputter or drip! EVER!!!BONUS: The iron appears to be a bit large, but is extremely light-weight and keeps my arthritic hands happy while they work. Also, the retractable cord keeps the iron safe and secure when not in use, and not needing to coil the cord and figure out how to make it stay in place has made life so much easier.I simply could not be more pleased with this product, and am very, very glad that I decided to shop on Amazon, because I could not find this miraculous small appliance at any retail store.
Productos recomendados
Mex $235.00
Mex $ 131 .00 Mex $131.00
Mex $2,400.86
Mex $ 1,080 .00 Mex $1,080.00