No hay artículos en el carro
No hay artículos en el carroTamaño:2 LBS(1 Quart) Dry & Dry – Nuestros productos 30 años de experiencia en la industria para gel de sílice desecante – ver comentarios de nuestros clientes. Seca y Seca gel de sílice es una forma Pure, vítreo, porosas de dióxido de silicio hecho de silicato de sodio. Es purificada y se procesan en o granular forma con abalorio. Su alta capacidad de absorción, es atribuir a sus millones de diminutos poros. El mecanismo de absorción es puramente física, con ningún cambio en tamaño o forma de las partículas incluso como estén saturados. Incluso cuando completamente saturados, el material todavía se ve y se siente seca. Color azul abalorio acudan a color rosa cuando está completamente absorbida con la humedad. Color azul abalorio contiene cloruro de cobalto que puede suponer problemas de riesgo para la salud y el medio ambiente. Nuestros abalorios contienen 0,005% Cloruro de cobalto. Clever Protección Armas, munición, bote, Collectables, joyas, documentos, lente de la cámara, ropa, cosméticos, libros, viajes y bolsas de gimnasio, decoración, y otros objetos de valor Clever Saver húmedo teléfono celular, cámara, relojes, electrónica, zapatos, & windshield. Dry & Dry – Calidad Premium 30 años de experiencia en la industria para Silica Gel desecante – Calidad Premium. Nuestro gel de sílice Embalaje es de la más alta calidad en el estándar de la industria para la protección de la humedad. abalorio puede ser reactivated colocando en el horno para microondas hasta 3,5 horas a 240 F o para unos 1 – 2 minutos. Puede experimentar una gran diferencia en comparación con otros productos. Productos de DRY & Dry Garantía 100% de satisfacción. Si usted tiene cualquier problema con nuestros productos, última intervensión de le proporcionaremos un reemplazo o reembolso completo.
Alan Doubleday
Comentado en Australia el 11 de febrero de 2025
What i ordered is what i got , very happy
J. Wood
Comentado en el Reino Unido el 10 de enero de 2025
Purchased to use with a Bambu 3D printer - have had these in the AMS and also in sealed food containers with part used filament - haven't had a single issue with a print yet and the AMS is reporting a nice low moisture level.
Lucyn
Comentado en Alemania el 5 de abril de 2025
is enough for multiple AMS on my printer
claude
Comentado en Francia el 1 de diciembre de 2024
Produit efficace et réutilisable.Un excellent moyen pour faire disparaitre la présence d'humidité de placard.
AxMn
Comentado en Canadá el 4 de octubre de 2024
Purchased for use with Malolos Silica Gel Desiccant containers to keep my troublesome 3D printer filament high, dry and ready for action, after 2 weeks I can say it works great. I've seen major improvements in my PETG prints and even some reduced stringing in some of my PLA+ ones as well.On average it absorbed about 8 grams of water from a ziplock bag sealed filament over the period of 1 week. The colour wasn't all the way green, but I decided to refresh it anyway. Used the lowest defrost setting on my microwave, the silica balls did their best Rice Krispies impression (snap, crackle, pop) for about 2 minutes then it settled down. I let it go a bit too long I think and ended up with about 5 or 6 black crystals due to overheating. So I think in future I will just remove as the popping stops, similar to microwave popcorn, and stir more often, as the recommended 10 minute cook time just seems excessive when using for smaller amounts.I then upgraded my containers to have built-in inexpensive hygrometers, tossed in 45 grams of silica gel, closed the lid, within 10 minutes the humidity of the air near the meter dropped from 45% down to 11% (and eventually 10% after another 5 minutes which I believe is the bottom cap to the hygrometer).As for the jar it came in, the photo can be a bid misleading as it looks like it should be 3-4 times the size bottle which appears similar to a detergent bottle, so it confused me at first when the package arrived and it was much smaller than I thought it would be. But I weight it at just over 2lbs, which was correct, and as I'm only using 45g of silica per-container, I should be able to keep 20 or 1kg filament rolls dry with the single jug (more so if I use the 1/2 size for smaller rolls). The price to keep dry per filament roll is pretty reasonable when you consider they can be refreshed multiple times.Overall, very happy with the purchase, will probably purchase again, and again, and again to support my 3D printing addiction.UPDATED: Perfect cooking recipe for nice orange beads, no burning.1. Only cook smaller batches if using smaller dishes, larger batches should be done in larger containers with only a layer or 2 of beads to allow for better evaporation.2. Cook for 2-3 minutes at a lower power setting, I use powerlevel 3.3. Stir to release the steam.4. Cook for 5 minutes at power level 2 to maintain the temp, but not burn the beads.5. If beads are mostly orange, then you're done, if still greenish repeat step 2 through 4.Suggest weighing beads before and after.
Productos recomendados
Mex $806.54
Mex $ 362 .00 Mex $362.00
Mex $214.10
Mex $ 107 .00 Mex $107.00