No hay artículos en el carro
No hay artículos en el carroTamaño: 2 lbs dry dry – nuestros productos 30 años de experiencia en la industria para gel de sílice desecante – ver comentarios de nuestros clientes. Seca y seca gel de sílice es una forma pure, vítreo, porosas de dióxido de silicio hecho de silicato de sodio. Es purificada y se procesan en o granular forma con abalorio. Su alta capacidad de absorción, es atribuir a sus millones de diminutos poros. El mecanismo de absorción es puramente física, con ningún cambio en tamaño o forma de las partículas incluso como estén saturados. Incluso cuando completamente saturados, el material todavía se ve y se siente seca. Color azul abalorio acudan a color rosa cuando está completamente absorbida con la humedad. Color azul abalorio contiene cloruro de cobalto que puede suponer problemas de riesgo para la salud y el medio ambiente. Nuestros abalorios contienen 0, 005% cloruro de cobalto. Clever protección armas, munición, bote, collectables, joyas, documentos, lente de la cámara, ropa, cosméticos, libros, viajes y bolsas de gimnasio, decoración, y otros objetos de valor clever saver húmedo teléfono celular, cámara, relojes, electrónica, zapatos, windshield. Dry dry – calidad premium 30 años de experiencia en la industria para silica gel desecante – calidad premium. Nuestro gel de sílice embalaje es de la más alta calidad en el estándar de la industria para la protección de la humedad. Abalorio puede ser reactivated colocando en el horno para microondas hasta 3, 5 horas a 240 f o para unos 1 – 2 minutos. Puede experimentar una gran diferencia en comparación con otros productos. Productos de dry dry garantía 100% de satisfacción. Si usted tiene cualquier problema con nuestros productos, última intervensión de le proporcionaremos un reemplazo o reembolso completo. .
Andrew Jackson
Comentado en el Reino Unido el 20 de marzo de 2025
Just what I needed for storing 3d printing filament below 25% humidity.
Christopher Campbell
Comentado en los Estados Unidos el 18 de marzo de 2025
I’ve been using the Dry & Dry [2 LBS] Blue Indicating Silica Gel Beads Desiccants (Industry Standard 3-5 mm) as my go-to desiccant for the Bambu AMS, and it’s been a solid addition to my 3D printing setup. Living in a humid area, keeping filament dry is a constant battle, and these reusable silica beads have made it a lot easier to win that fight.The 2-pound jug is a perfect size for my needs—enough to fill multiple desiccant holders in the AMS without feeling like I’m rationing it. The beads are about 3-5 mm, which makes them easy to handle and pour into breathable bags or containers without spilling everywhere. I love the blue-to-pink color change feature; it’s a clear, no-guesswork indicator when they’ve absorbed enough moisture and need a recharge. In the AMS, they start off a vibrant blue, and over a couple of weeks, they gradually shift to pink as they soak up humidity from the filament spools.Performance-wise, they do the job well. Paired with a hygrometer in the AMS, I’ve seen humidity levels drop from the 40-50% range down to a steady 15-20% within a day or two, depending on the weather. That’s been a lifesaver for my PLA and PETG prints—no more stringing or brittle parts due to moisture. The fact that they’re reusable is a huge bonus. When they turn pink, I pop them in the oven at 225°F for about an hour (spread out on a tray), and they’re back to blue and ready to go. I’ve also tried the microwave defrost method for 10 minutes, which works in a pinch, though it’s a bit less consistent.The build quality feels reliable—the beads don’t crumble or turn to dust, even after a few recharge cycles. The jug itself is sturdy with a tight lid, keeping the unused portion fresh until I need it. One small quirk: the color change isn’t always uniform across all the beads, so some stay blue longer than others, but it hasn’t affected their overall effectiveness. Also, they’re not the fastest at absorbing moisture compared to some pricier options, but for the price and reusability, I can’t complain.For anyone running a Bambu AMS, these silica beads are a practical, cost-effective way to keep filament in top shape. They’re simple to use, easy to recharge, and have kept my prints smooth and consistent. Definitely a worthwhile pickup for any 3D printing enthusiast dealing with humidity woes.
Rocky
Comentado en Canadá el 3 de diciembre de 2024
I use these silica gel beads to maintain the perfect dryness for my 3D printer filament, and they work like a charm! The blue-to-pink color change is a fantastic feature. It clearly indicates when the beads need to be recharged, which is super convenient. After adding them to my airtight storage containers, I’ve noticed a significant improvement in filament quality. No more stringing or moisture-related issues during printing! The beads are easy to recharge by baking, and the quantity provided is generous for the price. If you’re a 3D printing enthusiast looking for a reliable way to protect your filament from moisture, this product is a must-have. Highly recommend!
Zack
Comentado en Canadá el 7 de noviembre de 2024
I use this desiccant to dry 3d printer filament and it works as expected. The color changing feature is nice and I like that it can be reused multiple times.
tarek
Perfect for every use
Productos recomendados
Mex $299.00
Mex $ 134 .00 Mex $134.00
Mex $495.00
Mex $ 242 .00 Mex $242.00