No hay artículos en el carro
No hay artículos en el carroTRUE 5 US TON Capacity. Forged instead of Cast Crimping Head Frame ensures repeatable performance.;Black Oxide Crimp Head & Dies won't chip or flake.;Designed for 12 Gauge through 00 Gauge (2/0) (4mm to 70mm). Includes 9 Die Sets.;For all battery and welding cable, building wiring, crimp terminal lugs (including heavy cast lugs);5 Year Warranty from a well-known American name. NON-GENERIC
John Duffett
Comentado en Canadá el 19 de febrero de 2025
So far I've only made one test crimp on 2/0 wire, but it easily made what seems to be a perfectly formed crimp - neat and secure. While this doesn't on the face of it look much different than some of the cheaper tools available, it does seem to to a better job, and I'd say it is probably down to the quality and proper sizing of the dies. For the crimp shown, I chose to hit it twice along the length since I had the space to do so.
MK
Comentado en Australia el 18 de septiembre de 2024
Received. Nicely packaged in blow molded case, with all the cool half size extra dies. The Temco TH0006 worked for a total of 16 crimps. The last one seemed fine, but upon closing the valve to start the next crimp, it failed to initiate the stroke. Tried everything. Contacted Temco, who suggested I use a pair of visegrips to turn the valve another quarter turn past tight, try it, and if that did not work, go one quarter turn more. Still did not work on the first quarter past tight, nor the second quarter. Left with a $500 boat anchor. Funny, that the Chinese one I have back at home in Colorado, that I bought for $65 years ago, and hundreds of crimps ago, still works.
Andrew
Comentado en Singapur el 10 de mayo de 2022
Makes perfect hex lug crimps where wires don't pull out. AWG+ sizes are great to get good crimps into cheap or dodgy wires that don't run true to AWG.
Mr A.M Hall
Comentado en Australia el 22 de octubre de 2022
I was a little sceptical regarding this purchase as there were some bad reviews on the tool quality and crimp sizes. I am totally satisfied with this tool and have used it to set over 100 lugs of sizes from 2 AWG through to 10 AWG and I can not fault the quality or the range and accuracy of crimp size dies. This purchase has already paid for itself and was worth every cent.
C. Burns
Comentado en los Estados Unidos el 3 de agosto de 2018
This tool is neither the cheapest or most expensive of its kind but I find it hits the sweet spot as far as price and performance. My SIL and I have just converted a sprinter van to a motor home and had to do quite a bit of crimping. I have also used it to run heavy wiring on Jeeps. A bench mounted crimper would be easier to use but I find its size works well when we have to use it in a vehicle where the wires are already run or where it would be troublesome to remove them. The dies are clearly marked with the size and I have not had any problems getting a food crimp on the lugs or butt connectors I have used (Seltrim and Temco). The dies are held in place magnetically.As I am not usually in a rush I insert the lug or connector in the tool, squeeze the handles until the lug is held in place, insert the wire and squeeze again until the wire is firmly held in place, release pressure and rotate the lug or connector 90 degrees, squeeze until the dies touch, release pressure and rotate the lug or connector back 90 degrees and crimp again until the dies touch again. Using this method there are no extrusion to the outside and we have not had a failure.I think this is a substantial step up from the 30 to 40 dollar knock offs and recommend it highly.
Productos recomendados
Mex $691.96
Mex $ 332 .00 Mex $332.00
Mex $773.25
Mex $ 363 .00 Mex $363.00