Carro de la compra

No hay artículos en el carro

No hay artículos en el carro

National Hardware N109-080 SmartKey Cerradura de puerta de seguridad, llaves incluidas, recubiertas con protección WeatherGuard, color negro

Envío gratis en pedidos superiores a Mex $600.00

Mex $851.68

Mex $ 400 .00 Mex $400.00

En stock

1.Color:Negro -


Acerca de este artículo

  • El bloqueo de puerta SmartKey de National Hardware proporciona una función de bloqueo fácil de operar y la comodidad de utilizar una sola llave para todas tus cerraduras. Nota: Mide el respaldo de tu puerta, el orificio transversal y el grosor para garantizar que encuentres el ajuste adecuado.
  • El acabado negro WeatherGuard resistente a la corrosión protege el bloqueo de los elementos y proporciona la máxima durabilidad para la vida.
  • Se instala con hardware incluido tanto en aplicaciones zurdos como diestros.
  • El bloqueo de puerta SmartKey incluye bloqueo de puerta, pestillo, golpe, llave Kwikset KW01, herramienta de aprendizaje SmartKey y todo el hardware de instalación necesario.
  • Revestimiento con protección WeatherGuard para soportar condiciones climáticas duras y evitar la corrosión
  • Garantía limitada de por vida de National Hardware



Más información del producto

SmartKey

Una llave de comodidad para todas tus cerraduras

Llave

El bloqueo de puerta SmartKey ofrece una comodidad clave para que coincida con tus cerraduras SmartKey existentes

El candado con llave utiliza keway KW1 e incluye dos llaves.

1

Paso 1

Inserte la llave que actualmente opera su cerradura y gírala 90 grados en el sentido de las agujas del reloj.

2

Paso 2

- Inserte la herramienta SmartKey incluida completa y firmemente en el agujero SmartKey.

- Retire la herramienta SmartKey y la tecla actual.

3

Paso 3

- Inserte completamente su nueva llave en la cerradura y gírala 180 grados.

- Gire la nueva tecla 90 grados de nuevo en la posición recta y retírela. Ahora tu cerradura se vuelve a introducir en tu nueva llave y tu llave antigua ya no funcionará con la cerradura.

Características y beneficios

perfil

Se adapta a puertas de 0,75 a 2,5 pulgadas

Utilice esta cerradura de puerta en puertas, cobertizos y puertas exteriores.

Cierre abierto

Fácil de abrir y cerrar

Equipado con función de bloqueo de fácil funcionamiento para puertas, cobertizos y puertas.

derecha e izquierda

Uso en puertas basculantes izquierda y derecha

Esta cerradura de puerta se ajusta fácilmente para montar en puertas diestros o zurdos. Siga las instrucciones para seguir los pasos para determinar qué forma necesita instalar el bloqueo de puerta.

Artículo

Incluye herramientas de montaje

Este producto incluye instrucciones y todos los accesorios de montaje necesarios.

Protección contra el clima
llave inteligente

Jack
Comentado en Canadá el 27 de junio de 2024
Easy to install. Works well.
Bill from Montreal
Comentado en Canadá el 15 de septiembre de 2024
If your fence door is not perfectly aligned to fence framing you may need some handy man skills to improvise the framing. But I was very happy with end result .
Jdog77
Comentado en los Estados Unidos el 1 de febrero de 2023
I installed this on my redwood gate.There have been reports from my area of thieves going into backyards and breaking in through the sliding glass door. An unlocked gate makes this much easier. A locked gate can’t stop a really determined thief, but it makes it somewhat harder.The key for me (pun) was being able to match this to my existing house key! The Smartkey system allowed that.Install was straightforward. I think it’s important to add extra strength if you have a wood gate. Ideally a 2x4. I used an extra fence board I had around instead as redwood 2x4s are pricier right now.The lock works well from both sides and the spring seems reliable.It’s not Fort Knox but it will hopefully make a thief move on.I’m tempted to try to install one of these on my roll up garage door as I don’t care for the handle lock on there now. It might work but I need to investigate more to see if it will properly.Here is my install process1. First I put a second fence board in back of the last pice to thicken the area. So basically two 7/8” thick boards.2. Determined the best place for the lock. About mid way.3. Reversed the lock from right hand to left hand. Which was really easy.4. Drilled a pilot hole than a 1.5 saw drill hole.5. Installed lock.6. Installed latch lock on inside gate post.7. Rekeyed to match my home key.Done
Andrew Webster
Comentado en los Estados Unidos el 1 de octubre de 2023
After a little bit of a fight with the gate (it was a bit wonky and needed planing flat) this lock was no harder to fit than any other. It transformed how useful our side gate is. Before, I had to come through the house to unbolt it, so we only used the gate when we had to. Now, we can use it as a second secure entrance.
T R Cunningham
Comentado en Australia el 4 de febrero de 2022
I purchased this item and fitted it to my back gate. After installation I discovered that they key supplied with the lock did not in fact fit it, requiring me to remove the lock (and leaving a large hole in the gate) and ship it back to the US for a refund several weeks later. This just shouldn't happen.
Productos recomendados

Mex $239.00

Mex $ 138 .00 Mex $138.00

4.9
Elegir

Mex $702.03

Mex $ 343 .00 Mex $343.00

4.6
Elegir