No hay artículos en el carro
No hay artículos en el carroEl conector Hi-Lift Jack HL484 de 48 pulgadas y acero está construido con una combinación de componentes fundidos y cuatro componentes de acero estampados de alta resistencia. Las características de rendimiento y la capacidad de peso siguen siendo las mismas que las de los conectores Hi-Lift totalmente fundidos, pero a un precio más bajo. Con más de 100 años de calidad, el gato Hi-Lift es un gato robusto y altamente versátil que le permite controlar situaciones que requieren levantar, empujar, tirar, subir y bajar con abrazaderas. Si bien es liviano y fácil de manejar, el gato de elevación alta ofrece una capacidad de carga nominal de 4,660 libras (2114 kg) y una capacidad de carga probada de 7,000 libras (3175 kg), logrando un factor de seguridad del 150%. Nuestros conectores están diseñados para ayudarlo a sobrevivir en las situaciones más exigentes, ya sea que se encuentre en los cañones del desierto de Moab, las montañas de Gales, la jungla del Amazonas o las tierras de cultivo de Indiana. Con una gama completa de accesorios especialmente diseñados, el gato Hi-Lift es casi la pieza más versátil de equipos de recuperación automática, de agricultura y de recuperación automática que puede comprar. Cuando se trata de una situación de servicio pesado, ¡la herramienta debería ser un Hi-Lift!
DG
Comentado en Canadá el 7 de marzo de 2023
I love this. The best brand, super quality, easy to use. It will definitely outlast me. One thing to keep in mind: it is heavy as sin so only get the big one if you need it. I probably could have gotten away with the smaller size, but I still love it!
京士
Comentado en Japón el 22 de enero de 2023
なかなか良いです
rkruz
Comentado en los Estados Unidos el 2 de septiembre de 2022
I purchased the Hi-Lift for self-rescue when off-roading in my Jeep JKU. I initially had the 42" version but with the addition of the L100 Lift Mate and its long straps and hook to attached directly to the tire, I found the 42" version would not lift the tire much above the ground so we exchanged the 42 for the 48" version. Read on for our impressions.-- WRAPPED DELIVERY: The Hi-Lift came bagged in a big silver wrap and was not boxed. That didn't seem like much protection but the lift came complete with no missing or broken parts and included instructions.-- EASY TO LIFT ONE CORNER OF JEEP: It operated correctly and was exactly as described.It was very easy to lift one corner of the Jeep JKU.-- CAREFULLY ID LIFT POINTS: FYI if you drive a Jeep Wrangler.........After inspecting my Jeep Wrangler JKU, I did discover there are NO reachable lift points with the 4.5" beak of the Hi-LIft. The stock front bumper is only vinyl and will not hold weight and will be damaged. There are no reachable lift points on the sides except for the stock side step which are not strong enough to hold without bending or breaking. Lift points on the rear stock bumper could only be reached under the tow hook. All other points on the stock Jeep will be damaged if attempting to lift there. The Hi-Lift jack lift surface is only 4.5" long, so it requires steel after-market bumpers.-- NEEDS LIFT MATE WITH STOCK JEEP: In order to use the HI-Lift with a stock Jeep, the accessory LM-100 Lift-Mate is required, which provides hooks to attach to the wheel to lift the wheel directly.We were concerned that the portion of the jack head that is against the tire might pop the bead of the tire and we saw the tire deflect quite a bit but it did not. Still before using we would probably over-inflate the tire to reduce the risk of popping the bead.-- HEAVY: Its very heavy at about 30lbs so if mounted on the rear gate, reinforced hinges should be used.-- FITS ON FLOOR OF JEEP: Even at 48" long it will fit in the back of the Jeep across the floor which is how I carry it.-- HAS HANDLE GRIPPER: It comes with an attached spring to hold the lift tube in place when storing.-- SMALL BASE: The base is too small an surface area to even allow the jack to stand up confidently on its own. The small base will sink into the ground when lifting so an extra base is needed to provide a good solid surface to push against. A road base is essential to use this jack to raise a vehicle safely. Hi-Lift has an accessory, a Road Base, that is about 12" square but I made one from wood scraps I have around the shop and it works great..
David Gebers
Comentado en Alemania el 30 de diciembre de 2021
Super sicher jedoch am besten die bodenplatte gleich motbestellen
Bob
Comentado en Canadá el 16 de septiembre de 2020
I pulled pipes out that were hammered into water (10 ft. In mud) to hold my dock.It was better than expected.Strong. Well made. Works great. Well painted . Some reviews state jack goes down to bottom when latch is released to lower , this true but only if there is no weight on the jack when lowering. This actually makes sense rather than having to click many times to bring jack to bottom after use. Definitely recommend.
ARTURO CACHEUX
Comentado en México el 22 de mayo de 2019
Excelente
Fernando O.
Comentado en México el 20 de febrero de 2019
Exelente producto
Alberto Díaz
Comentado en México el 15 de noviembre de 2019
Se ve más perro mi jeep
Héctor
Comentado en México el 17 de octubre de 2018
Excelente herramienta para la necesidad del jeep
Productos recomendados
Mex $615.00
Mex $ 325 .00 Mex $325.00
Mex $1,456.54
Mex $ 699 .00 Mex $699.00
Mex $3,318.00
Mex $ 1,360 .00 Mex $1,360.00
Mex $3,128.53
Mex $ 1,470 .00 Mex $1,470.00
Mex $2,863.59
Mex $ 1,174 .00 Mex $1,174.00
Mex $2,276.68
Mex $ 1,070 .00 Mex $1,070.00
Mex $734.51
Mex $ 352 .00 Mex $352.00