No hay artículos en el carro
No hay artículos en el carro
Cable de alimentación con funda para adaptador PCI Express de 8 pines (6+2) macho de 8 pines
Longitud del producto: 9 pulgadas.
Peso del producto: 1 onza
Color del cable: negro y amarillo.
Modelo de cable: 1007 18AWG
Material: aislamiento de PVC.
Especificaciones del conductor: 34 x 0.12TS
Material del conductor: alambre de cobre estañado.
Diámetro: OD2,1 mm.
Temperatura nominal: 80 ℃
Interfaz del producto: conector hembra PCIe de 8 pines en un extremo, el otro extremo de la interfaz macho PCIe de 2 x 8 (6+2) pines
Steve
Comentado en los Estados Unidos el 13 de febrero de 2025
Nice blade cuts well
kendel laughman
Comentado en los Estados Unidos el 1 de enero de 2025
Great for cutting concrete and block.
Pablo
Comentado en los Estados Unidos el 12 de octubre de 2024
I had bought cheap cables with a 6-pin female connector, which began to cause heating problems at the joints. These 8-pin cables have so far not given me heating problems at the joints and you can see that they are thicker than a cheap one.
Raymond Keepers
Comentado en los Estados Unidos el 13 de septiembre de 2024
I have had zero issues with these yet. They work as they should.
Tyler Schweisthal
Comentado en los Estados Unidos el 19 de abril de 2023
I bought a bunch of different PCIE splitters to find which ones are actually 18ga and this brand from Amangny is actually 18ga. Measured exactly at 0.040" and the cables are solid. Heat shrink is glued in place as well, very nice detail. Highly recommend.
Said Velazquez
Comentado en México el 14 de junio de 2022
Ea muy fácil de usar, el acabado del cable es de buena calidad, para el uso de Rig de mineria es muy práctica
E.B.
Comentado en los Estados Unidos el 9 de febrero de 2022
Have had 0 issues with these splitters since purchasing 2 months ago. They appear and feel very premium, and while I have not checked myself, I would trust that these are true 18awg. Great product.
Altynbek Nazarov
Comentado en los Estados Unidos el 2 de agosto de 2021
I bought couple splitter of other brand then I saw these, they had pack of 6 for decent price and decided to give them a try. This item on the time of purchase had not many reviews, it was worth it
John
Comentado en Canadá el 31 de diciembre de 2020
Bought this blade to slightly widen our granite counter top oven opening. It worked great and made short work of the tough granite. Not the cheapest blade out there, and I don't have experience with anything else, but I'd have to recommend.
Riley Williams
Comentado en los Estados Unidos el 9 de diciembre de 2019
My wife wanted a flagstone sidewalk from the driveway to the front porch steps but I wanted a paver sidewalk. In a stroke of brilliance I decided to put down some big flagstones randomly and then lay the pavers around them, cutting the pavers to fit the natural contours of the stones. I had no idea how much work and time I would need to commit to this project. Needless to say, I cut a lot of pavers and trimmed a lot of flagstones. I started with a 7 inch Makita grinder, which was just to heavy to use hour after hour. I bought a Makita 4.5 inch angle grinder (best move ever) and started buying 4.5 inch diamond blades. Most of them cut the pavers fine, but the stones dulled them quickly. I don't know how many other brands I went though, maybe 4 or 5, but when I get this one I could tell right away it was different.This blade cuts fast and lasts a long time. I actually bought two because I was going through a blade or two each week and I was tired of using a dull blade while I waited for the next blade to ship. I haven't opened the second package because this one is lasting so long, over a month. So when I think of ALL the other blades that lasted less than a week, this is the real deal. The trade off and the only bad thing I can tell you about this blade is it makes a rough cut. I'm much more of a woodworker than a stone guy, and I have some high end saw blades that leave an amazingly clean cut and then there are some that aren't quite as nice and I can tell you why one is better for super smooth cuts and why another is not. I don't understand diamond masonry blades, but this is very comparable to my framing saw blades: it cuts fast but doesn't leave a clean cut. That being said, I would choose this blade every time for cutting natural stone. All of the blades I used were fine until I started cutting a flagstone. After cutting a flagstone and then going back to cutting the pavers, there was a huge difference in the blade's ability to cut. Natural stone just destroyed the other blades, but this one just keeps cutting.To be specific about the cut, some of the blades I used cut slow and left a very clean edge, sometimes the edge was so sharp you could cut yourself it you weren't careful. This blade is so aggressive the edge of the stone has small breaks as though the blade chiseled it's way through instead of making a nice clean cut.So if you're cutting actual natural stone (not man-made stone) this blade is for you. If you're cutting other masonry products, this will be fine and probably out last many other blades, but it doesn't deliver a crisp clean cut.
LB
Comentado en Canadá el 28 de mayo de 2017
I used this with a cordless grinder to cut through thick Terra Cotta floor tiles. Granted - these are pretty soft tiles but this blade cut through like it was nothing. Very very clean cuts with no chipping. I cut dry - about 10 tiles and it was as easy with the 10th as the 1st. Pretty confident that I'll be able to use this to make more intricate cuts too.
Productos recomendados
Mex $476.96
Mex $ 228 .00 Mex $228.00
Mex $6,666.71
Mex $ 1,881 .00 Mex $1,881.00
Mex $343.50
Mex $ 185 .00 Mex $185.00