Carro de la compra

No hay artículos en el carro

No hay artículos en el carro

CC, 24 V, 200 N, 44 lb/20 kg, con ventosa, redondo, electroimán, electroimán, 70 x 9 mm

Envío gratis en pedidos superiores a Mex $600.00

Mex $430.30

Mex $ 232 .00 Mex $232.00

En stock

1.Tamaño:13 X 30mm 1kg


2.:12 V


Acerca de este artículo

  • Tamaño total: 70 x 9 mm (diámetro). *T);Longitud de la correa: 24 cm/9. 5 pulgadas; tamaño de la rosca: M5 x 8
  • Utiliza alambre barnizado QA-1/155, soporta altas temperaturas de hasta 155 °C, mejor que el QA-1/169 en el mercado
  • Ampliamente aplicado en automatizaciones: línea de montaje, clasificadora, brazo mecánico, instalación experimental, etc
  • El electroimán en condiciones de trabajo la conversión electromagnética produciría una cierta cantidad de calor, electricidad más frecuentemente la temperatura más alta, lo que es un fenómeno normal.


Características:

Imán de elevación eléctrica; Powerfulandcompact

Superficie lisa y plana; bajo consumo y fiable.

Aplicaciones: montaje, máquina de clasificación, alarma mecánica, instalación experimental, etc.

Se recomienda que la fuerza real no sea del 80% de la fuerza succionada en la placa de nombre.

Especificaciones:

Material: metal.

Color: plateado.

Ciclo de trabajo (ED%): 50 %.

Tiempo eléctrico: menos de 7 minutos.

Longitud de la correa: 24 cm. 5 pulgadas.

El paquete incluye:

1 electroimán de sujeción.

Nota:

TheForcewillbedecreaseduetolong timeworking, lowervoltageand improperSuckedobjectect.

Disparo de luz y diferentespantallaspueden causar el color del artículo en la imagenalgo diferente de la realidad. La medida permite erroris+/-1-3 cm.


Sam C.
Comentado en los Estados Unidos el 5 de marzo de 2024
I got the 70 KG version, and 24 volts this seems to hold with about 70 kg of force, though I don't have a spring scale to confirm this. The magnetic force seems to exponentially increase as the input voltage is increased. (These magnets don't have to be run at full power) After an hour of running in the PVC sleeve in which I will mount this, the temperature of the magnet is about 177 °F. The seller states it should withstand temperatures up to 155 °C (310 °F), so I've been torture testing it for around 2 hours, and don't see any problems except that the bare magnet is well above hot enough to burn you if you touch it. I'm not sure if the 12V version of this magnet would generate more or less heat, or no difference at all. Nominal wattage of the magnet appears to be ~9 watts, but after reaching high temperatures the current drops off due to increased resistance and wattage is ~7 watts. Be aware though if you need a longer bolt than the one provided, as the bolt size description may be wrong. The bolt size listed for the 70 kg magnet is M5, but it's actually an M8 bolt.
Rhidian Bevan
Comentado en Canadá el 14 de febrero de 2024
The product is rated to hold 10 kg but in my application it did not consistently hold my load which was less than 10 kg, therfore I had to return it for a magnet with a much stronger holding force.
DJ YOHO
Comentado en los Estados Unidos el 13 de noviembre de 2024
effective for the project were were doing, while not stated they are sealed and water resistant.
Nate1911a1
Comentado en los Estados Unidos el 15 de abril de 2023
Works as expected.
Jake
Comentado en Australia el 25 de noviembre de 2020
Does not work out of packet
Productos recomendados

Mex $425.18

Mex $ 212 .00 Mex $212.00

4.3
Elegir

Mex $513.13

Mex $ 277 .00 Mex $277.00

4.3
Elegir