No hay artículos en el carro
No hay artículos en el carro Features:
1. The high-voltage module/generator made by the circuit composed of components, can be used as a high-voltage source for school scientific experiments, electronic devices, negative-ion generator and science small productions.
2. Adopt for coil principle, output high-voltage pulses, powerful discharge strength.
3. Compact size, high efficiency, stable and professional performance, dependable to use.
4. The input voltage is less than 7.2V and will output about 800KV high voltage.
5. Built to meet standard specification, strictly follow factory quality control.
Specifications:
High voltage type: pulse direct current split type
Input voltage: less than 7.2V(no more than 7.2V)
Input current: 2.4A (Different depends on input voltage)
Output voltage: appro 800KV
(please pay attention to safety when using!)
Output current: approx. 1A
High voltage bipolar discharge distance: 3cm
Discharge time: appro 50s (no more than 1 minutes)
Size: 14 x 2.3 cm
Product usage method:
Module input terminal and the output terminal, red and green line is Input terminal, red- green+,two thick line which has same color is the high voltage output, fixed output end of the proper arc distance and input end is connected with a battery can generate high-voltage electric arc.
About input power:
Can use single section 3.7V or two series, such as battery, the
idle mobile phone battery (to remove protective plate, proposed capacity above
2000mAh) or / NiMH battery pack, 4V or 6V lead- batteries and
other (to achieve the best effect of 6V battery)
Module use matters needing attention:
1. High voltage module should avoid the use of high voltage no-load, power must be
adjusted before the appropriate high voltage line ends, high voltage wire pull arc distance and the use of the battery voltage and capacity is proportional to.
2. To test the arc distance from