Alex
Comentado en los Estados Unidos el 4 de marzo de 2025
Good
Alex
Comentado en los Estados Unidos el 4 de marzo de 2025
Good
Alex
Comentado en los Estados Unidos el 4 de marzo de 2025
Good
Alex
Comentado en los Estados Unidos el 4 de marzo de 2025
Good
Alex
Comentado en los Estados Unidos el 4 de marzo de 2025
Good
Alex
Comentado en los Estados Unidos el 4 de marzo de 2025
Good
Alex
Comentado en los Estados Unidos el 4 de marzo de 2025
Good
Alex
Comentado en los Estados Unidos el 4 de marzo de 2025
Good
Harry
Comentado en los Estados Unidos el 17 de enero de 2025
Do buy this cheap one its not worth the money that I had to pay the tech to install it and it locked right up after the 3rd day of running so now I've got to pay the tech all over again and when it did run the electric fan was so underpowered that it could get my fridge below 49 degrees
Harry
Comentado en los Estados Unidos el 17 de enero de 2025
Do buy this cheap one its not worth the money that I had to pay the tech to install it and it locked right up after the 3rd day of running so now I've got to pay the tech all over again and when it did run the electric fan was so underpowered that it could get my fridge below 49 degrees
Harry
Comentado en los Estados Unidos el 17 de enero de 2025
Do buy this cheap one its not worth the money that I had to pay the tech to install it and it locked right up after the 3rd day of running so now I've got to pay the tech all over again and when it did run the electric fan was so underpowered that it could get my fridge below 49 degrees
Harry
Comentado en los Estados Unidos el 17 de enero de 2025
Do buy this cheap one its not worth the money that I had to pay the tech to install it and it locked right up after the 3rd day of running so now I've got to pay the tech all over again and when it did run the electric fan was so underpowered that it could get my fridge below 49 degrees
Harry
Comentado en los Estados Unidos el 17 de enero de 2025
Do buy this cheap one its not worth the money that I had to pay the tech to install it and it locked right up after the 3rd day of running so now I've got to pay the tech all over again and when it did run the electric fan was so underpowered that it could get my fridge below 49 degrees
Harry
Comentado en los Estados Unidos el 17 de enero de 2025
Do buy this cheap one its not worth the money that I had to pay the tech to install it and it locked right up after the 3rd day of running so now I've got to pay the tech all over again and when it did run the electric fan was so underpowered that it could get my fridge below 49 degrees
Harry
Comentado en los Estados Unidos el 17 de enero de 2025
Do buy this cheap one its not worth the money that I had to pay the tech to install it and it locked right up after the 3rd day of running so now I've got to pay the tech all over again and when it did run the electric fan was so underpowered that it could get my fridge below 49 degrees
Harry
Comentado en los Estados Unidos el 17 de enero de 2025
Do buy this cheap one its not worth the money that I had to pay the tech to install it and it locked right up after the 3rd day of running so now I've got to pay the tech all over again and when it did run the electric fan was so underpowered that it could get my fridge below 49 degrees
Terry Clark
Comentado en los Estados Unidos el 4 de abril de 2025
WORK WELL
Terry Clark
Comentado en los Estados Unidos el 4 de abril de 2025
WORK WELL
Terry Clark
Comentado en los Estados Unidos el 4 de abril de 2025
WORK WELL
Terry Clark
Comentado en los Estados Unidos el 4 de abril de 2025
WORK WELL
Terry Clark
Comentado en los Estados Unidos el 4 de abril de 2025
WORK WELL
Terry Clark
Comentado en los Estados Unidos el 4 de abril de 2025
WORK WELL
Terry Clark
Comentado en los Estados Unidos el 4 de abril de 2025
WORK WELL
Terry Clark
Comentado en los Estados Unidos el 4 de abril de 2025
WORK WELL
Mary Yvonne Baker
Comentado en los Estados Unidos el 10 de agosto de 2024
These are so small that they wouldn’t fit over my small bottles. I guess Americans do not have an understanding of the metric system!
Larry
Comentado en los Estados Unidos el 27 de diciembre de 2024
this is a great product, works great and easy install. the original equipment do not have longevity in these fridges
Larry
Comentado en los Estados Unidos el 27 de diciembre de 2024
this is a great product, works great and easy install. the original equipment do not have longevity in these fridges
Larry
Comentado en los Estados Unidos el 27 de diciembre de 2024
this is a great product, works great and easy install. the original equipment do not have longevity in these fridges
Larry
Comentado en los Estados Unidos el 27 de diciembre de 2024
this is a great product, works great and easy install. the original equipment do not have longevity in these fridges
Larry
Comentado en los Estados Unidos el 27 de diciembre de 2024
this is a great product, works great and easy install. the original equipment do not have longevity in these fridges
Larry
Comentado en los Estados Unidos el 27 de diciembre de 2024
this is a great product, works great and easy install. the original equipment do not have longevity in these fridges
Larry
Comentado en los Estados Unidos el 27 de diciembre de 2024
this is a great product, works great and easy install. the original equipment do not have longevity in these fridges
Larry
Comentado en los Estados Unidos el 27 de diciembre de 2024
this is a great product, works great and easy install. the original equipment do not have longevity in these fridges
Goodtimesaretobehad
Comentado en los Estados Unidos el 24 de noviembre de 2024
This heat wrap took an excessive amount of heat and it is very difficult. I would not recommend.
Harry1028
Comentado en los Estados Unidos el 22 de noviembre de 2024
The item appears to be well-made and resembles both its predecessor and the original part. It seems that the Evaporator Fan Motor in many GE side-by-side refrigerators needs to be replaced every few years. My last purchase and installation of a Fan Motor for my 2013 GE Refrigerator was in October 2020. It's important to carefully compare the connector design of the replacement with the one being replaced. Regrettably, it's often not feasible to disassemble the faulty item in your refrigerator for examination before buying a replacement. This time, the replacement process was lengthier because I had to make two adjustments for a correct fit. The slot in the silicone gasket was not in the correct position, which required cutting a new channel on the opposite side. Moreover, the connector of the new fan, designed to clip onto its counterpart in the fridge, had a square opening, unlike the original. The original connector had a ridge on the bottom instead of a square opening. The new fan connector didn't secure properly, so I carefully widened the square opening (using the tip of a small screwdriver heated over a flame). Alternatively, I could have cut and spliced the wires, attaching the old wire and plug to the new fan, but I was cautious about splicing wires that would be in a cold environment.
Harry1028
Comentado en los Estados Unidos el 22 de noviembre de 2024
The item appears to be well-made and resembles both its predecessor and the original part. It seems that the Evaporator Fan Motor in many GE side-by-side refrigerators needs to be replaced every few years. My last purchase and installation of a Fan Motor for my 2013 GE Refrigerator was in October 2020. It's important to carefully compare the connector design of the replacement with the one being replaced. Regrettably, it's often not feasible to disassemble the faulty item in your refrigerator for examination before buying a replacement. This time, the replacement process was lengthier because I had to make two adjustments for a correct fit. The slot in the silicone gasket was not in the correct position, which required cutting a new channel on the opposite side. Moreover, the connector of the new fan, designed to clip onto its counterpart in the fridge, had a square opening, unlike the original. The original connector had a ridge on the bottom instead of a square opening. The new fan connector didn't secure properly, so I carefully widened the square opening (using the tip of a small screwdriver heated over a flame). Alternatively, I could have cut and spliced the wires, attaching the old wire and plug to the new fan, but I was cautious about splicing wires that would be in a cold environment.
Harry1028
Comentado en los Estados Unidos el 22 de noviembre de 2024
The item appears to be well-made and resembles both its predecessor and the original part. It seems that the Evaporator Fan Motor in many GE side-by-side refrigerators needs to be replaced every few years. My last purchase and installation of a Fan Motor for my 2013 GE Refrigerator was in October 2020. It's important to carefully compare the connector design of the replacement with the one being replaced. Regrettably, it's often not feasible to disassemble the faulty item in your refrigerator for examination before buying a replacement. This time, the replacement process was lengthier because I had to make two adjustments for a correct fit. The slot in the silicone gasket was not in the correct position, which required cutting a new channel on the opposite side. Moreover, the connector of the new fan, designed to clip onto its counterpart in the fridge, had a square opening, unlike the original. The original connector had a ridge on the bottom instead of a square opening. The new fan connector didn't secure properly, so I carefully widened the square opening (using the tip of a small screwdriver heated over a flame). Alternatively, I could have cut and spliced the wires, attaching the old wire and plug to the new fan, but I was cautious about splicing wires that would be in a cold environment.
Harry1028
Comentado en los Estados Unidos el 22 de noviembre de 2024
The item appears to be well-made and resembles both its predecessor and the original part. It seems that the Evaporator Fan Motor in many GE side-by-side refrigerators needs to be replaced every few years. My last purchase and installation of a Fan Motor for my 2013 GE Refrigerator was in October 2020. It's important to carefully compare the connector design of the replacement with the one being replaced. Regrettably, it's often not feasible to disassemble the faulty item in your refrigerator for examination before buying a replacement. This time, the replacement process was lengthier because I had to make two adjustments for a correct fit. The slot in the silicone gasket was not in the correct position, which required cutting a new channel on the opposite side. Moreover, the connector of the new fan, designed to clip onto its counterpart in the fridge, had a square opening, unlike the original. The original connector had a ridge on the bottom instead of a square opening. The new fan connector didn't secure properly, so I carefully widened the square opening (using the tip of a small screwdriver heated over a flame). Alternatively, I could have cut and spliced the wires, attaching the old wire and plug to the new fan, but I was cautious about splicing wires that would be in a cold environment.
Harry1028
Comentado en los Estados Unidos el 22 de noviembre de 2024
The item appears to be well-made and resembles both its predecessor and the original part. It seems that the Evaporator Fan Motor in many GE side-by-side refrigerators needs to be replaced every few years. My last purchase and installation of a Fan Motor for my 2013 GE Refrigerator was in October 2020. It's important to carefully compare the connector design of the replacement with the one being replaced. Regrettably, it's often not feasible to disassemble the faulty item in your refrigerator for examination before buying a replacement. This time, the replacement process was lengthier because I had to make two adjustments for a correct fit. The slot in the silicone gasket was not in the correct position, which required cutting a new channel on the opposite side. Moreover, the connector of the new fan, designed to clip onto its counterpart in the fridge, had a square opening, unlike the original. The original connector had a ridge on the bottom instead of a square opening. The new fan connector didn't secure properly, so I carefully widened the square opening (using the tip of a small screwdriver heated over a flame). Alternatively, I could have cut and spliced the wires, attaching the old wire and plug to the new fan, but I was cautious about splicing wires that would be in a cold environment.
Harry1028
Comentado en los Estados Unidos el 22 de noviembre de 2024
The item appears to be well-made and resembles both its predecessor and the original part. It seems that the Evaporator Fan Motor in many GE side-by-side refrigerators needs to be replaced every few years. My last purchase and installation of a Fan Motor for my 2013 GE Refrigerator was in October 2020. It's important to carefully compare the connector design of the replacement with the one being replaced. Regrettably, it's often not feasible to disassemble the faulty item in your refrigerator for examination before buying a replacement. This time, the replacement process was lengthier because I had to make two adjustments for a correct fit. The slot in the silicone gasket was not in the correct position, which required cutting a new channel on the opposite side. Moreover, the connector of the new fan, designed to clip onto its counterpart in the fridge, had a square opening, unlike the original. The original connector had a ridge on the bottom instead of a square opening. The new fan connector didn't secure properly, so I carefully widened the square opening (using the tip of a small screwdriver heated over a flame). Alternatively, I could have cut and spliced the wires, attaching the old wire and plug to the new fan, but I was cautious about splicing wires that would be in a cold environment.
Harry1028
Comentado en los Estados Unidos el 22 de noviembre de 2024
The item appears to be well-made and resembles both its predecessor and the original part. It seems that the Evaporator Fan Motor in many GE side-by-side refrigerators needs to be replaced every few years. My last purchase and installation of a Fan Motor for my 2013 GE Refrigerator was in October 2020. It's important to carefully compare the connector design of the replacement with the one being replaced. Regrettably, it's often not feasible to disassemble the faulty item in your refrigerator for examination before buying a replacement. This time, the replacement process was lengthier because I had to make two adjustments for a correct fit. The slot in the silicone gasket was not in the correct position, which required cutting a new channel on the opposite side. Moreover, the connector of the new fan, designed to clip onto its counterpart in the fridge, had a square opening, unlike the original. The original connector had a ridge on the bottom instead of a square opening. The new fan connector didn't secure properly, so I carefully widened the square opening (using the tip of a small screwdriver heated over a flame). Alternatively, I could have cut and spliced the wires, attaching the old wire and plug to the new fan, but I was cautious about splicing wires that would be in a cold environment.
Harry1028
Comentado en los Estados Unidos el 22 de noviembre de 2024
The item appears to be well-made and resembles both its predecessor and the original part. It seems that the Evaporator Fan Motor in many GE side-by-side refrigerators needs to be replaced every few years. My last purchase and installation of a Fan Motor for my 2013 GE Refrigerator was in October 2020. It's important to carefully compare the connector design of the replacement with the one being replaced. Regrettably, it's often not feasible to disassemble the faulty item in your refrigerator for examination before buying a replacement. This time, the replacement process was lengthier because I had to make two adjustments for a correct fit. The slot in the silicone gasket was not in the correct position, which required cutting a new channel on the opposite side. Moreover, the connector of the new fan, designed to clip onto its counterpart in the fridge, had a square opening, unlike the original. The original connector had a ridge on the bottom instead of a square opening. The new fan connector didn't secure properly, so I carefully widened the square opening (using the tip of a small screwdriver heated over a flame). Alternatively, I could have cut and spliced the wires, attaching the old wire and plug to the new fan, but I was cautious about splicing wires that would be in a cold environment.
Johnny Byrne
Comentado en los Estados Unidos el 16 de octubre de 2024
Returned it. Came with a decent variety but all much smaller than I thought so couldn’t use any of them. Check the size(s) you need before purchasing.